Month: September 2022

The solubility of imidazoles in ethers is lower than that in alcohols and decreases with increasing chain length of the ethers . 10111-08-7, formula is C4H4N2O, Name is 1H-Imidazole-2-carbaldehyde. In contrast, the solubility of benzimidazoles in alcohols (C3–C6) is higher than in water and generally decreases with an increase of the alkyl chain length of the alcohols. Safety of 1H-Imidazole-2-carbaldehyde.

Joel, C.;Jim Livingston, D.;Biju Bennie, R.;Jeyanthi, D.;Vijay Solomon, Rajadurai research published 《 Designing bifunctional phenanthroimidazole chromophores for highly selective ratiometric chemosensing of Cu²⁺/F^– and Co²⁺/F^– ions in organic solvents》, the research content is summarized as follows. Two new phenanthroimidazole based highly sensitive and selective bifunctional probes 2-(1H-imidazol-2-yl)-1H-phenanthro[9,10-d]imidazole (PQIM) and 2-(1H-indol-3-yl)-1H-phenanthro[9,10-d]imidazole (PQIN) have been synthesized which could act as ratiometric sensors. Upon addition of analytes, the receptors exhibited pronounced fluoroionophoric behavior on account of internal charge transfer mechanism (ICT). The mol. sensing studies of both the ligands were explored using UV-visible and fluorescence spectroscopic techniques. It has been observed that the receptor PQIM shows better recognition behavior towards Cu2+/F- while the ligand PQIN exhibited enhanced sensing activity towards Co2+/F-. The binding stoichiometry of the receptor and cation/anion complex was probed to be 1:1 from Job’s plot which were further confirmed from ESI mass spectral techniques and ¹H NMR titrations Further, the binding interactions between these ions (Co²⁺, Cu²⁺ and F^–) with their resp. receptors are probed by d. functional theory calculations This study extends our knowledge on designing chem. compounds that could act as chemosensors in selective binding of certain anions/cations and their sensing mechanisms.

Safety of 1H-Imidazole-2-carbaldehyde, 1H-Imidazole-2-carbaldehyde, also known as 1H-Imidazole-2-carbaldehyde, is a useful research compound. Its molecular formula is C4H4N2O and its molecular weight is 96.09 g/mol. The purity is usually 95%.
1H-Imidazole-2-carboxaldehyde is a novel PTP1b inhibitor with potential application to treat type 2 diabetes.
1H-Imidazole-2-carboxaldehyde is a broad-spectrum antimicrobial that has been shown to inhibit the growth of bacteria by interfering with protein synthesis. It binds to the cytosolic protein and receptor molecule, which are involved in the activation of bacterial enzymes. Imidazole-2-carboxaldehyde reacts with anhydrous sodium and copper complex to produce hydrogen bonds, which prevent the formation of the nitrogen atoms necessary for cellular processes. This chemical also has biological properties such as glyoxal, which inhibits bacterial growth by reacting with amino groups on proteins., 10111-08-7.

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Imidazole is a heterocyclic compound with a five-membered planar ring. It is amphoteric and highly polar. 250285-32-6, formula is C27H37ClN2, Name is 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride. The pharmacophore of imidazole exists in bioactive compounds including amino acids, plant growth regulators and therapeutic agents. Category: imidazoles-derivatives.

Jo, Minyoung;Li, Jingbai;Dragulescu-Andrasi, Alina;Rogachev, Andrey Yu.;Shatruk, Michael research published 《 Incorporation of coinage metal-NHC complexes into heptaphosphide clusters》, the research content is summarized as follows. Cu(I) and Au(I) ions, capped with an N-heterocyclic carbene (NHC), react with (TMS)₃P₇ (TMS = trimethylsilyl) to afford an η⁴-coordinated anion [NHC^DippCu-P₇(TMS)]^– and a neutral trinuclear complex (NHC^DippAu)₃P₇. Protecting the P₇ cage with the TMS groups is instrumental in controlling these reactions.

250285-32-6, 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, also known as 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, is a useful research compound. Its molecular formula is C27H37ClN2 and its molecular weight is 425 g/mol. The purity is usually 95%.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride has been used to generate N-heterocyclic carbene catalysts for use in carbonylative cross-coupling of pyridyl halides with aryl boronic acids.

1,3-Bis(2,6-diisopropylphenyl)imidazolium Chloride is an imidazolium salt that is active against all stages of Trypanosoma cruzi and may represent a promising candidate for treatment of Chagas disease.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is an organic compound that is used as a solvent. It was originally synthesized by reacting triethyl orthoformate with 2,6-diisopropylaniline. This reaction formed the corresponding imidazolium salt. The synthesis of this compound was later improved by using ring-opening polymerization of glycolide and furfural. 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is mainly used to extract estradiol from urine samples in clinical laboratories., Category: imidazoles-derivatives

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Imidazole derivatives generally have good solubility in protic solvents. Simple imidazole derivatives, such as 1H-imidazole, 2-methyl-1H-imidazole, and 1,2-dimethylimidazole, have very high solubility in water. 1739-84-0, formula is C5H8N2, Name is 1,2-Dimethyl-1H-imidazole. Their solubility in alcohol is lower than that in water and decreases with increasing molecular weight of the alcohols . Related Products of 1739-84-0.

Jin, Saimeng;Byrne, Fergal P.;Clark, James H.;McElroy, Con Robert;Quinn, Alex;Sherwood, James;Hunt, Andrew J. research published 《 3-Methoxybutan-2-one as a sustainable bio-based alternative to chlorinated solvents》, the research content is summarized as follows. Methylation of acetoin with di-Me carbonate was performed in a sustainable one-step process, with improved process mass intensity (PMI) and atom economy compared to previously published methods. The resulting product, 3-methoxybutan-2-one (MO) was successfully evaluated as a bio-based solvent, while both Kamlet-Taft solvatochromic parameters and Hansen solubility parameters demonstrate its potential viability in the substitution of chlorinated solvents. MO exhibited a low peroxide forming potential and a neg. Ames mutagenicity test and was successfully used as a solvent in a Friedel-Crafts acylation (79% yield compared to 77% in dichloromethane) and for N-alkylations. MO is a renewable oxygenated solvent, with the potential ability to substitute carcinogenic halogenated solvents in some applications.

1739-84-0, 1,2-Dimethylimidazole is used in the synthesis of 1,2-dimethyl-3-n-butylimidazoliumchloride and 1,2-dimethyl-3-n-propylimidazolium chloride. It also can be used in the synthesis of 1-(2-methoxyethyl)-2,3-dimethylimidazolium chloride and hexafluorophosphate salts.
1,2-Dimethylimidazole is a heterocyclic compound that contains nitrogen and carbon. It can be produced by the reaction between glyoxal and fatty acid in the presence of a base. 1,2-Dimethylimidazole has been shown to have biological properties such as an antioxidant effect. It is also used as a chemical intermediate for production of other chemicals such as 2-methylimidazole and 3-methylimidazole. 1,2-Dimethylimidazole has been shown to react with metal carbonyls to produce methylimines, which are useful intermediates in organic synthesis. The reaction mechanism involves hydrogen bonding and steric interactions between the imidazole ring and the metal carbonyl reactant., Related Products of 1739-84-0

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Imidazole is a five-membered heterocyclic moiety that possesses three carbon, two nitrogen, four hydrogen atoms, and two double bonds. 1739-84-0, formula is C5H8N2, Name is 1,2-Dimethyl-1H-imidazole. It is also known as 1, 3-diazole. It contains two nitrogen atoms, in which one nitrogen bear a hydrogen atom, and the other is called pyrrole type nitrogen. Product Details of C5H8N2.

Jin, Chongyue;Wang, Min;Li, Zhilin;Kang, Jin;Zhao, Yan;Han, Jin;Wu, Zengmin research published 《 Two dimensional Co₃O₄/g-C₃N₄ Z-scheme heterojunction: mechanism insight into enhanced peroxymonosulfate-mediated visible light photocatalytic performance》, the research content is summarized as follows. In this study, to improve peroxymonosulfate (PMS)-mediated visible-light photocatalytic performance of g-C₃N₄ in antibiotics degradation and elucidate its mechanism, an ultrathin Co₃O₄ nanomeshes/g-C₃N₄ nanosheets 2D Z-scheme heterojunction composite (x% Co₃O₄/g-C₃N₄) was successfully prepared calcining the mixtures of MOF-Co ultrathin nanosheets and g-C₃N₄. This unique nanomeshes/nanosheets structure with large SSA (153.92 m²/g) possessed an abundance of accessible active sites and large area intimate interfaces between Co₃O₄ and g-C₃N₄, thus remarkably promoting the separation and transport of charge carriers. The as-prepared optimal 10% Co₃O₄/g-C₃N₄ composites exhibited excellent degradation efficiency toward tetracycline (TC) under visible light irradiation and were further enhanced with the addition of PMS. The mechanism of the enhanced TC degradation in Co₃O₄/g-C₃N₄/Vis/PMS system was investigated in detail based on the characterization of the catalysts, TC degradation efficiency assessment, ESR measurements, and reactive oxygen species (ROSs) quenching results. The TC degradation pathway was proposed based on the intermediates identified by the gas chromatog.-mass spectrometer (GC-MS) measurements. This study provides a facile and promising path for the remediation of contaminated water via PMS mediated photocatalysis over highly active g-C₃N₄-based catalysts.

Product Details of C5H8N2, 1,2-Dimethylimidazole is used in the synthesis of 1,2-dimethyl-3-n-butylimidazoliumchloride and 1,2-dimethyl-3-n-propylimidazolium chloride. It also can be used in the synthesis of 1-(2-methoxyethyl)-2,3-dimethylimidazolium chloride and hexafluorophosphate salts.
1,2-Dimethylimidazole is a heterocyclic compound that contains nitrogen and carbon. It can be produced by the reaction between glyoxal and fatty acid in the presence of a base. 1,2-Dimethylimidazole has been shown to have biological properties such as an antioxidant effect. It is also used as a chemical intermediate for production of other chemicals such as 2-methylimidazole and 3-methylimidazole. 1,2-Dimethylimidazole has been shown to react with metal carbonyls to produce methylimines, which are useful intermediates in organic synthesis. The reaction mechanism involves hydrogen bonding and steric interactions between the imidazole ring and the metal carbonyl reactant., 1739-84-0.

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Imidazole Biochem/physiol Actions: Imidazole derivatives have antibacterial, antifungal and anticancer functionality. It interacts with DNA and also binds to protein and stops cell division. 250285-32-6, formula is C27H37ClN2, Name is 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride. It also acts as a microtubule destabilizing agents and inhibits topoisomerase and Cytochrome P450 Family 26 Subfamily A Member 1 (CYP26A1) enzymes. Name: 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride.

Jiang, Nan;Mei, Yuling;Yang, Yu;Dong, Youxian;Ding, Zekun;Zhang, Jianbo research published 《 A General Strategy for the Stereoselective Synthesis of Pyrrole-Fused Chiral Skeletons: [3+2] Cycloaddition with 2-Nitro-2,3-Unsaturated Glycosides》, the research content is summarized as follows. In this study, a two-step methodol. was developed for the synthesis of chiral pyrroles from 2-nitroglycals via Ferrier rearrangement and Barton-Zard reaction under mild conditions without transition metal catalysts. The Ferrier rearrangement reaction of 2-nitro-glycals and a series of O-nucleophiles proceeded smoothly in the presence of N-heterocyclic carbene (NHC) catalyst and K₂CO₃ which allowed the highly stereoselective synthesis of the diverse 2-nitro-2,3-unsaturated glycosides in excellent yields. Subsequently, the rearrangement products were conveniently transformed into the desired chiral pyrroles by [3+2] cycloaddition (Barton-Zard reaction) with isocyanoacetate in the presence of Cs₂CO₃. One-pot strategy was also successfully demonstrated for the gram-scale synthesis of one chiral pyrrole. This is the first report of stereoselective conversion from 2-nitroglycals to chiral pyrrole.

Name: 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, also known as 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, is a useful research compound. Its molecular formula is C27H37ClN2 and its molecular weight is 425 g/mol. The purity is usually 95%.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride has been used to generate N-heterocyclic carbene catalysts for use in carbonylative cross-coupling of pyridyl halides with aryl boronic acids.

1,3-Bis(2,6-diisopropylphenyl)imidazolium Chloride is an imidazolium salt that is active against all stages of Trypanosoma cruzi and may represent a promising candidate for treatment of Chagas disease.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is an organic compound that is used as a solvent. It was originally synthesized by reacting triethyl orthoformate with 2,6-diisopropylaniline. This reaction formed the corresponding imidazolium salt. The synthesis of this compound was later improved by using ring-opening polymerization of glycolide and furfural. 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is mainly used to extract estradiol from urine samples in clinical laboratories., 250285-32-6.

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Imidazole Biochem/physiol Actions: Imidazole derivatives have antibacterial, antifungal and anticancer functionality. It interacts with DNA and also binds to protein and stops cell division. 250285-32-6, formula is C27H37ClN2, Name is 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride. It also acts as a microtubule destabilizing agents and inhibits topoisomerase and Cytochrome P450 Family 26 Subfamily A Member 1 (CYP26A1) enzymes. Related Products of 250285-32-6.

Jiang, Kunming;Han, Shantao;Ma, Mingyu;Zhang, Lu;Zhao, Yucheng;Chen, Mao research published 《 Photoorganocatalyzed Reversible-Deactivation Alternating Copolymerization of Chlorotrifluoroethylene and Vinyl Ethers under Ambient Conditions: Facile Access to Main-Chain Fluorinated Copolymers》, the research content is summarized as follows. Fluoropolymers have found broad applications for many decades. Considerable efforts have focused on expanding ac-cesses toward main-chain fluorinated polymers. In contrast to previous polymerizations of gaseous fluoroethylenes con-ducted at elevated temperatures and with high-pressure metallic vessels, we here report the development of a photoor-ganocatalyzed reversible-deactivation radical alternating copolymerization of chlorotrifluoroethylene (CTFE) and vinyl ethers (VEs) at room temperature and ambient pressure by exposing to LED light irradiation This method enables the synthesis of various fluorinated alternating copolymers with low ETH and high chain-end fidelity, allowing iterative switch of the copolymerization between “ON” and “OFF” states, the preparation of fluorinated block alternating copolymers, as well as post-synthetic modifications.

Related Products of 250285-32-6, 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, also known as 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, is a useful research compound. Its molecular formula is C27H37ClN2 and its molecular weight is 425 g/mol. The purity is usually 95%.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride has been used to generate N-heterocyclic carbene catalysts for use in carbonylative cross-coupling of pyridyl halides with aryl boronic acids.

1,3-Bis(2,6-diisopropylphenyl)imidazolium Chloride is an imidazolium salt that is active against all stages of Trypanosoma cruzi and may represent a promising candidate for treatment of Chagas disease.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is an organic compound that is used as a solvent. It was originally synthesized by reacting triethyl orthoformate with 2,6-diisopropylaniline. This reaction formed the corresponding imidazolium salt. The synthesis of this compound was later improved by using ring-opening polymerization of glycolide and furfural. 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is mainly used to extract estradiol from urine samples in clinical laboratories., 250285-32-6.

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Imidazole is a heterocyclic compound with a five-membered planar ring. It is amphoteric and highly polar. 60-56-0, formula is C4H6N2S, Name is 1-Methyl-1H-imidazole-2(3H)-thione. The pharmacophore of imidazole exists in bioactive compounds including amino acids, plant growth regulators and therapeutic agents. Product Details of C4H6N2S.

Jiang, Chenglin;Sun, Ju;Li, Rui;Yan, Shijuan;Chen, Wei;Guo, Liang;Qin, Guochen;Wang, Pengcheng;Luo, Cheng;Huang, Wenjie;Zhang, Qinghua;Fernie, Alisdair R.;Jackson, David;Li, Xiang;Yan, Jianbing research published 《 A reactive oxygen species burst causes haploid induction in maize》, the research content is summarized as follows. Haploid induction (HI) is an important tool in crop breeding. Phospholipase A1 (ZmPLA1)/NOT LIKE DAD (NLD)/MATRILINEAL (MTL) is a key gene controlling HI in maize; however, the underlying mol. mechanism remains unclear. In this study, to dissect why loss of ZmPLA1 function could mediate HI we performed a comprehensive multiple omics anal. of zmpla1 mutant anthers by integrating transcriptome, metabolome, quant. proteome, and protein modification data. Functional classes of significantly enriched or differentially abundant mol. entities were found to be associated with the oxidative stress response, suggesting that a reactive oxygen species (ROS) burst plays a critical role in HI. In support of this, we further discovered that a simple chem. treatment of pollen with ROS reagents could lead to HI. Moreover, we identified ZmPOD65, which encodes a sperm-specific peroxidase, as a new gene controlling HI. Taken together, our study revealed a likely mechanism of HI, discovered a new gene controlling HI, and created a new method for HI in maize, indicating the importance of ROS balance in maintaining normal reproduction and providing a potential route to accelerate crop breeding.

60-56-0, Methimazole is an antithyroid compound found to have antioxidant properties. Methimazole inhibits activation of the IFN-g-induced Janus kinase (JAK)/STAT signaling pathway in FRTL-5 thyroid cells, which may account for its immunodolulatory effects. Additionally, methimazole is an inhibitor of thyroperoxidase.

Methimazole is a thiourea antithyroid agent that prevents iodine organification, thus inhibiting the synthesis of thyroxine. Antihyperthyroid.

Methimazole is an inhibitor of thyroid hormone synthesis. It is a substrate for thyroid peroxidase that traps oxidized iodide, preventing its use by thyroglobulin for thyroid hormone synthesis. Methimazole (0.4 mg/kg) inhibits the absorption of radiolabeled iodide by the thyroid gland in rats by 80.9%.3 It reduces the incidence of lymphocytic thyroiditis in the insulin-dependent type 1 diabetic BB/W rat. Methimazole has been used to induce hypothyroidism in mice. Formulations containing methimazole have been used in the treatment of hyperthyroidism.

Methimazole is a thyreostatic compound, and an antihormone, which is widely used in medicine for the treatment of hyperthyroidism.

Methimazole is a thioamide inhibitor of the enzyme thyroid peroxidase (TPO), with antithyroid activity. Upon administration, methimazole inhibits the metabolism of iodide and the iodination of tyrosine residues in the thyroid hormone precursor thyroglobulin by TPO; this prevents the synthesis of the thyroid hormones triiodothyronine (T3) and thyroxine (T4).

Methimazole is an antithyroid medication which is now considered the first line agent for medical therapy of hyperthyroidism and Graves disease. Methimazole has been linked to serum aminotransferase elevations during therapy as well as to a clinically apparent, idiosyncratic liver injury that is typically cholestatic and self-limited in course.
Methimazole, also known as tapazole or danantizol, belongs to the class of organic compounds known as imidazolethiones. These are aromatic compounds containing an imidazole ring which bears a thioketone group. Methimazole is a drug which is used for the treatment of hyperthyroidism, goiter, graves disease and psoriasis. Methimazole is soluble (in water) and a very weakly acidic compound (based on its pKa). Methimazole has been detected in multiple biofluids, such as urine and blood. Methimazole can be converted into methimazole S-oxide., Product Details of C4H6N2S

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

The solubility of imidazoles in ethers is lower than that in alcohols and decreases with increasing chain length of the ethers . 250285-32-6, formula is C27H37ClN2, Name is 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride. In contrast, the solubility of benzimidazoles in alcohols (C3–C6) is higher than in water and generally decreases with an increase of the alkyl chain length of the alcohols. Computed Properties of 250285-32-6.

Jiang, Binyang;Shi, Shi-Liang research published 《 Pd-Catalyzed Cross-Coupling of Alkylzirconocenes and Aryl Chlorides》, the research content is summarized as follows. The first Pd-catalyzed aryl-alkyl cross-coupling of alkylzirconocenes and aryl halides was reported. A com. available N-heterocyclic carbene (IPr) as the ligand for palladium catalyst was critical to enable the challenging process. This mild protocol does not require base additives and tolerated a broad scope of both coupling partners bearing various functional groups and heterocycles. Moreover, both terminal and internal alkenes were applicable, and the latter underwent “chain walking”, giving the terminal coupling product exclusively. Preliminary mechanistic studies revealed a precatalyst activation pathway and inhibited β-H elimination due to steric bulk of NHC ligand.

Computed Properties of 250285-32-6, 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, also known as 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, is a useful research compound. Its molecular formula is C27H37ClN2 and its molecular weight is 425 g/mol. The purity is usually 95%.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride has been used to generate N-heterocyclic carbene catalysts for use in carbonylative cross-coupling of pyridyl halides with aryl boronic acids.

1,3-Bis(2,6-diisopropylphenyl)imidazolium Chloride is an imidazolium salt that is active against all stages of Trypanosoma cruzi and may represent a promising candidate for treatment of Chagas disease.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is an organic compound that is used as a solvent. It was originally synthesized by reacting triethyl orthoformate with 2,6-diisopropylaniline. This reaction formed the corresponding imidazolium salt. The synthesis of this compound was later improved by using ring-opening polymerization of glycolide and furfural. 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is mainly used to extract estradiol from urine samples in clinical laboratories., 250285-32-6.

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

The solubility of imidazoles in ethers is lower than that in alcohols and decreases with increasing chain length of the ethers . 250285-32-6, formula is C27H37ClN2, Name is 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride. In contrast, the solubility of benzimidazoles in alcohols (C3–C6) is higher than in water and generally decreases with an increase of the alkyl chain length of the alcohols. Name: 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride.

Jia, Jie;Yuan, Fushan;Zhang, Zihao;Song, Xuejiao;Hu, Fangdong;Xia, Ying research published 《 Copper-Catalyzed Ring-Opening Defluoroborylation of gem-Difluorinated Cyclobutenes: A General Route to Bifunctional 1,3-Dienes and Their Applications》, the research content is summarized as follows. The exploration of the reactivity of gem-difluorinated small-size rings has continuously drawn attention in recent years but is limited to three-membered carbocycles. Herein, the authors report a Cu-catalyzed reaction of gem-fluorinated cyclobutenes with bis(pinacolato)diboron (B₂pin₂). A sequence of defluoroborylation and ring opening process produces B,F-bifunctional 1,3-dienes in a stereoselective manner. The transformation together with the efficient downstream coupling of the boronate and the fluoride moiety collectively constitutes a modular route to highly functionalized and stereocontrolled 1,3-dienes.

Name: 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, also known as 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride, is a useful research compound. Its molecular formula is C27H37ClN2 and its molecular weight is 425 g/mol. The purity is usually 95%.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride has been used to generate N-heterocyclic carbene catalysts for use in carbonylative cross-coupling of pyridyl halides with aryl boronic acids.

1,3-Bis(2,6-diisopropylphenyl)imidazolium Chloride is an imidazolium salt that is active against all stages of Trypanosoma cruzi and may represent a promising candidate for treatment of Chagas disease.

1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is an organic compound that is used as a solvent. It was originally synthesized by reacting triethyl orthoformate with 2,6-diisopropylaniline. This reaction formed the corresponding imidazolium salt. The synthesis of this compound was later improved by using ring-opening polymerization of glycolide and furfural. 1,3-Bis(2,6-diisopropylphenyl)imidazolium chloride is mainly used to extract estradiol from urine samples in clinical laboratories., 250285-32-6.

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Imidazole is a five-membered heterocyclic moiety that possesses three carbon, two nitrogen, four hydrogen atoms, and two double bonds. 1739-84-0, formula is C5H8N2, Name is 1,2-Dimethyl-1H-imidazole. It is also known as 1, 3-diazole. It contains two nitrogen atoms, in which one nitrogen bear a hydrogen atom, and the other is called pyrrole type nitrogen. Product Details of C5H8N2.

Jia, Hu;Kang, Zheng;Li, Zhijie research published 《 Using 1,2 dimethylimidazole to improve gel thermalstability for wellbore plugging in ultra-high temperature fractured reservoirs》, the research content is summarized as follows. Working fluid loss as well as formation damage is usually encountered as a big challenge during well completion and workover for fossil-fuel production Polymer gel is widely used for wellbore plugging to isolate the working fluid and the reservoir for controlling fluid loss and protecting the reservoir. However, with the increasing number of ultra-high temperature well (>180 °C) operations, the thermal stability of the gel plug is increasingly required. In this paper, 1,2 dimethylimidazole (C₅H₈N₂) is first used to prepare a gel plug. The effects of C₅H₈N₂on gel gelation at dynamic heating mode, viscosity, elasticity, thermal stability and temporary plugging performances are evaluated at 190 °C. It is found that the addition of C₅H₈N₂does not affect the gelation, while a slightly viscosity-reducing effect is exhibited. At 190 °C, the gel without C₅H₈N₂ broke down within 4 h and lost its temporary plugging performance, while the gel with 20% imidazole remained unbroken after 60 h. For the fractured core (5 cm in length) plugging experiments, the addition of 15% C₅H₈N₂ significantly increased the breakthrough pressure of gels from 0.2 MPa to 1.9 MPa compared to pure gels (without C₅H₈N₂). The enhancement mechanism of C₅H₈N₂is investigated. Recommendations for the application of gels with C₅H₈N₂ are given in the paper. This paper provides an avenue for the development of gel plug to deal with wellbore temporary plugging jobs in ultra-high temperature fractured reservoirs.

Product Details of C5H8N2, 1,2-Dimethylimidazole is used in the synthesis of 1,2-dimethyl-3-n-butylimidazoliumchloride and 1,2-dimethyl-3-n-propylimidazolium chloride. It also can be used in the synthesis of 1-(2-methoxyethyl)-2,3-dimethylimidazolium chloride and hexafluorophosphate salts.
1,2-Dimethylimidazole is a heterocyclic compound that contains nitrogen and carbon. It can be produced by the reaction between glyoxal and fatty acid in the presence of a base. 1,2-Dimethylimidazole has been shown to have biological properties such as an antioxidant effect. It is also used as a chemical intermediate for production of other chemicals such as 2-methylimidazole and 3-methylimidazole. 1,2-Dimethylimidazole has been shown to react with metal carbonyls to produce methylimines, which are useful intermediates in organic synthesis. The reaction mechanism involves hydrogen bonding and steric interactions between the imidazole ring and the metal carbonyl reactant., 1739-84-0.

Referemce:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem