Author: Jessica.F

1977-72-6, A common compound: 1977-72-6, name is 5-Fluoro-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Intermediate VI-10 5-fluorobenzimidazole (0.28 g, 2.04 mmol) was added to a 150 mL round bottom flask.After stirring potassium carbonate as a base (0.30 g, 2.20 mmol) and acetonitrile as a solvent at 50 C for 40 minutes,After cooling to room temperature, intermediate V (0.43 g, 1.70 mmol) was added and the mixture was warmed to 75 C and the mixture was traced to the end of the reaction.After further concentration, extraction, column chromatography separation, drying and the like, the intermediate X-10 (0.49 g) is obtained, the yield is 73.4%;White solid,

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Fluoro-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Southwest University; Zhou Chenghe; Man Nabaonei·lamohan·laao·yadafu; Wang Juan; (39 pag.)CN110305064; (2019); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Some common heterocyclic compound, 10111-08-7, name is Imidazole-2-carboxaldehyde, molecular formula is C4H4N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of Imidazole-2-carboxaldehyde

Compound 234.1. lH-Imidazole-2-carbonitrile. Into a 1-L round-bottom flask, was placed a solution of lH-imidazole-2-carbaldehyde (5 g, 52.04 mmol) in NN- dimethylformamide (200 mL). Triethylamine (10.8 mL, 77.97 mmol), hydroxylamine hydrochloride (3.95 g, 56.84 mmol, 1.10 equiv), 1-propanephosphonic anhydride solution and 2,4,6-tripropyl-l,3,5,2,4,6-trioxatriphosphorinane-2,4,6-trioxide solution (T3P) (36.4 g, 114.40 mmol) were added to the reaction. The reaction mixture was stirred for 4h at 100 C, cooled and then quenched with 500 mL of water/ice. The aqueous phase was extracted with 3 x 1L of ethyl acetate, then the combined organic layers was washed with 2 x 1L of brine, dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was purified by silica gel chromatography with ethyl acetate/petroleum ether (1/2) as eluent to furnish 2 g (41%) of the title compound as an off-white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 10111-08-7, its application will become more common.

Reference:
Patent; 3-V BIOSCIENCES, INC.; HEUER, Timothy Sean; OSLOB, Johan D.; MCDOWELL, Robert S.; JOHNSON, Russell; YANG, Hanbiao; EVANCHIK, Marc; ZAHARIA, Cristiana A.; CAI, Haiying; HU, Lily W.; WO2015/95767; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Application of 6160-65-2,Some common heterocyclic compound, 6160-65-2, name is 1,1′-Thiocarbonyldiimidazole, molecular formula is C7H6N4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 19 (0.1 g, 0.36 mmol),1,1′-thiocarbonyldiimidazole (0.1 g, 0.58 mmol)And triethylamine (0.08 mL)Was dissolved in 30 mL of tetrahydrofuran,60 reflux 5h (TLC detection reaction is completed).After the reaction was completed, the solvent was evaporated under reduced pressure. To the residue was added 30 mL of dichloromethane and a saturated aqueous solution of sodium chloride (3×10 mL). The organic layer was dried over anhydrous sodium sulfate and filtered. (4-cyclopropyl-1-naphthyl) -2-mercapto-1H-imidazo [4,5-b] pyridine (22) as a yellowish solid. Yield 70.9%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,1′-Thiocarbonyldiimidazole, its application will become more common.

Reference:
Patent; Shan Dong University; Lu, Xinyong; Meng, Qing; Zhan, Peng; Fang, Zengjun; Zhao, Tong; Sun, Zhuosen; Sun, Xiukun; (36 pag.)CN106083847; (2016); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 4857-06-1

Sodium hydride (purity 55%)(516 mg, 12.0 mmol) was added to a N,N-dimethylformamide solution (8.0 ml) of 2-chloro-1H-benzimidazole (1.52 g, 10.0 mmol), at 0C, under nitrogen stream, and stirring was carried out for 20 minutes. Methyl iodide (0.750 ml, 12.0 mmol) was further added, and stirring was carried out under room temperature for 2 hours. Water was added to the reaction solution, and the resulting solid substance was collected by filtration to afford 2-chloro-1-methyl-1H-benzimidazole (1.51 g, yield 91%) as a white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4857-06-1.

Reference:
Patent; Daiichi Sankyo Company, Limited; EP2258697; (2010); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 51605-32-4, name is Ethyl 5-methyl-1H-imidazole-4-carboxylate, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 51605-32-4, HPLC of Formula: C7H10N2O2

[2757] To a stirred solution of 964 (Ethyl 4-methyl-5-imidazole carboxylate, 7.7 g, 50 mmol) in 100 ml of acetone at room temperature, was added K2CO3 (6.9 g, 50 mmol) portionwise. Stirred at room temperature for 25 minutes, added in MeI (5 ml, 80 mmol) stirred for 21/2 h, (monitored reaction by TLC). Additional K2CO3 (3.09 g, 22 mmol) and MeI (3 ml) were added. Stirred reaction for 16 h, then filtered reaction mixture and rinsed with acetone (80 ml). A clear filtrate obtained. Filtrate was evaporated and the residue was chromatographed (eluent methylene chloride/methanol (60:1) to afford 1.8 g of solid. This solid was purified by Prep Plate chromatography ((20:1) CH2Cl2:MeOH NH3), compound still impure. Another column chromatography ((50:1) CH2Cl2:MeOH.NH3) was done to afford 383 mg of the desired product, compound 965.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, Ethyl 5-methyl-1H-imidazole-4-carboxylate, and friends who are interested can also refer to it.

Reference:
Patent; Schering Corporation; US2004/122018; (2004); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 152628-03-0,Some common heterocyclic compound, 152628-03-0, name is 4-Methyl-2-propyl-1H-benzo[d]imidazole-6-carboxylic acid, molecular formula is C12H14N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 2; Variant 2; Methanesulphonic acid is heated to about 80 C. At a temperature of 75 C. to 85 C., 2-propyl-4-methyl-1H-benzimidazole-6-carboxylic acid is added. Then at 85 C. to 95 C. N-methyl-o-phenylene-diamine is added.The mixture is heated to110 C. to 130 C. and phosphorus pentoxide is metered in until an internal temperature of not more than 160 C. is reached. Then the mixture is stirred for 3 hours at a maximum temperature of 145 C. It is cooled to <100 C. and water is metered into the reaction mixture. 50% sodium hydroxide solution is added at <100 C. until a pH of less than 3 is obtained.Finally, treatments with charcoal are carried out at <100 C.At a temperature of <80 C. isopropanol is added and the mixture is adjusted with sodium hydroxide solution to a pH between 4.5 and 7. The aqueous phase is separated off. In order to precipitate dimethyl-2'-propyl-2,5'-bi-1H-benzimidazole water is metered in, the contents of the apparatus are cooled to at least 40 C. for technical reasons and the product is isolated.Yield: 78-90% of theoryHPLC purity: >99.5%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Methyl-2-propyl-1H-benzo[d]imidazole-6-carboxylic acid, its application will become more common.

Reference:
Patent; Boehringer Ingelheim International GmbH; US2011/190508; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

5805-57-2, name is (1H-Benzo[d]imidazol-2-yl)methanamine, belongs to imidazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: (1H-Benzo[d]imidazol-2-yl)methanamine

(R/5)-2-Hydroxy-2-(4-(5-(3-phenyl-4-(trifluoromethyl)isoxazol-5-yl)- l,2,4-oxadiazol-3-yl)phenyl)acetic acid (Int-V, 20 mg, 0.046 mmol), (1H- benzo[d]imidazol-2-yl)methanamine (10.24 mg, 0.070 mmol), HATU (22.92 mg, 0.060 mmol), and 4-methylmorpholine (18.76 mg, 0.185 mmol) were added to DMF (1 mL). This was stirred for 1 h before it was purified via preparative LCMS with the following conditions: Column: Waters XBridge C18, 19 x 250 mm, 5-muiotaeta particles; Guard Column: Waters XBridge CI 8, 19 x 10 mm, 5-muiotaeta particles; Mobile Phase A: 5:95 methanohwater with 10-mM ammonium acetate; Mobile Phase B: 95:5 methanol: water with 10-mM ammonium acetate; Gradient: 45-100% B over 25 minutes, then a 5-minute hold at 100% B; Flow: 20 mL/min. Fractions containing the desired product were combined and dried via centrifugal evaporation to give (R/5)-N- ((lH-benzo[d]imidazol-2-yl)methyl)-2-hydroxy-2-(4-(5-(3-phenyl-4- (trifluoromethyl)isoxazol-5-yl)-l,2,4-oxadiazol-3-yl)phenyl)acetamide (12.8 mg, 0.023 mmol, 49.3 % yield): LCMS = 561.1 [M+H]+; ‘H NMR (400 MHz, methanol- cU) 5 ppm 8.19 (2 H, d, J=8.58 Hz), 7.51-7.79 (10 H, m), 7.34 (2 H, dd, J=6.05, 3.19 Hz), 5.27 (1 H, s), 4.76-4.94 (2 H, m); HPLC peak RT = 2.6 min (Method E).

The synthetic route of 5805-57-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; CHERNEY, Robert J.; ZHANG, Yanlei; WO2011/133734; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 670-96-2, name is 2-Phenyl-1H-imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 670-96-2, Safety of 2-Phenyl-1H-imidazole

General procedure: A mixture of Cu(OAc)2 (3.6 mg, 0.020 mmol), ligand II (21.6 mg, 0.020 mmol), and F-PEG (0.25 g, 0.10 mmol) in MeOH (1 mL) was heated to dissolve all the reagents added completely and MeOH was removed under the reduced pressure. H2O (6 mL) was added to the residue and then 4-methoxyphenylboroic acid (1a, 60.8 mg, 0.40 mmol) and imidazole (2a, 13.6 mg, 0.20 mmol) were added. The whole reaction mixture was stirred under an O2 atmosphere at room temperature for 24 h. The mixture was diluted with brine and extracted with AcOEt (30 mL×3). The organic layer was washed with H2O (10 mL×3) and dried over MgSO4. The solvent was removed under the reduced pressure and the residue was purified by SiO2 column chromatography using AcOEt to give N-(4-methoxyphenyl)imidazole (3aa) (26.4 mg, 78%).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Phenyl-1H-imidazole, and friends who are interested can also refer to it.

Reference:
Article; Inamoto, Kiyofumi; Nozawa, Kanako; Kadokawa, Jun; Kondo, Yoshinori; Tetrahedron; vol. 68; 38; (2012); p. 7794 – 7798;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

60-56-0, Adding some certain compound to certain chemical reactions, such as: 60-56-0, name is 1-Methyl-1H-imidazole-2(3H)-thione, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 60-56-0.

To 10 mL of Acetonitrile were added 3 mmol (1.05 g) of methyl 4-chloro-3-[(E)- dimethylaminomethyleneamino]sulfonyl-5-nitro-benzoate (WO 2012/018635) 3.3 mmol (376 mg) of 2-mercapto-1-methylimidazole and 6.6 mmol (910 mg) of K2C03. The solution was stirred at room temperature overnight. When TLC showed no remaining methyl 4-chloro-3-[(E)- dimethylaminomethyleneamino]sulfonyl-5-nitro-benzoate the reaction mixture was diluted with 10 mL of water and extracted with ethyl acetate. The combined organic layers were washed with brine, dried with Na2S04 and evaporated under reduced pressure. The crude product was then purified by recrystallization from ethanol to yield 1.04 g of yellow crystals (81 % yield). 1H NMR (200 MHz, DMSO-cf6) d 8.66 (d, J = 1.9 Hz, 1 H), d 8.34 (d, J = 1.8 Hz, 2H), d 7.28 (s, 1 H), d 6.87 (s, 1 H), d 3.91 (s, 3H), 3.51 (s, 3H), d 3.10 (s, 3H), d 2.92 (s, 3H). MS m/z: not found

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 60-56-0.

Reference:
Patent; UNIVERSITAeT WIEN; ERKER, Thomas; SCHREPPEL, Philipp; (235 pag.)WO2019/193159; (2019); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 760212-58-6, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 760212-58-6, name is 1-(4-Bromophenyl)-2-phenyl-1H-benzo[d]imidazole, This compound has unique chemical properties. The synthetic route is as follows.

Intermediate I-3 4.23 g (11.0 mmol), Intermediate I-4 3.49 g (10.0 mmol), Pd (PPh3) 4 0.06 g (0.5 mmol) and K2CO34.15 g (30.0 mmol) of THF/H2O (2/1 volume ratio) mixed solution and then dissolved in 40 mL, was stirred at 80 for 5 hours. after cooling to room temperature the reaction solution was added to 40 mL water and extracted three times with diethyl ether, 50 mL. The combined organic layers were dried over magnesium sulfate, and separation of the residue obtained by evaporation of the solvent by silica jelgwan chromatography to give the compound 4 4.33 g (yield 81%). The resulting compound was confirmed by LC-MS and 1H NMR.

The chemical industry reduces the impact on the environment during synthesis 1-(4-Bromophenyl)-2-phenyl-1H-benzo[d]imidazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Samsung Display Co., Ltd.; Kim, Young Kuk; Kim, Kwang Hyun; Lee, Uhn Young; (77 pag.)KR2015/39485; (2015); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem