Author: Jessica.F

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 67085-11-4, name is 4-(4-Chlorophenyl)-1-(1H-imidazol-1-yl)butan-2-ol, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C13H15ClN2O

(1) 5 kg of 1-(2-hydroxy-4-(4-chlorophenyl)butyl)-1H-imidazole, fully dissolved in 35 kg of methylene chloride,5kg of thionyl chloride was added dropwise at a rate of 1.5ml/s at 20C, and the temperature was slowly raised to 32C and the reaction was incubated for 1 hour.Then reflux at 60 C for 1 hour, slowly cooled to 15 C to obtain the reaction solution;(2) In the reaction solution obtained in step (1), add 10C water at a rate of 0.5 ml/s while stirring.The volume ratio of liquid to water is 0.005:1, and then anhydrous sodium carbonate is added at 1.3 kg/L, suction filtration,The solid was discarded, and the liquid was concentrated at 55 C until no dichloromethane was distilled off.Dry, that is, too. Upon detection, the yield of the product of this example was 99.18%.The target product and impurity levels were determined using HPLC and standards. After testing,The target product, 1-(2-chloro-4-(4-chlorophenyl)butyl)-1H-imidazole, has a content of 99.17%.

According to the analysis of related databases, 67085-11-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Zhuzhou Qianjin Pharmaceutical Co., Ltd.; Li Fujun; Bai Lu; Peng Kaifeng; Wen Fengqiu; Li Sanxin; Gong Yun; (10 pag.)CN105198814; (2018); B;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 2849-93-6, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 2849-93-6, name is 1H-Benzimidazole-2-carboxylic acid belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

1 H-Benzimidazole-2-carboxylic acid (500 tng, 3.08 mmol) was suspended in EtOH (5 mL), treated with thionyl chloride (1.12 mL, 15.4 mmol), and heated to reflux overnight. The reaction mixture was concentrated in vacuo, yielding 644 mg (99%) of the crude product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Benzimidazole-2-carboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BAYER PHARMACEUTICALS CORPORATION; WO2006/121588; (2006); A2;; ; Patent; BAYER PHARMACEUTICALS CORPORATION; WO2006/121860; (2006); A2;; ; Patent; BAYER PHARMACEUTICALS CORPORATION; WO2006/121904; (2006); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 120781-02-4,Some common heterocyclic compound, 120781-02-4, name is Methyl 2-bromo-1-methyl-1H-imidazole-5-carboxylate, molecular formula is C6H7BrN2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1. To a mixture of the Ex 3 hydrochloride (100 mg, 0.243 mol), 2-bromo-3-methyl-3H-imidazole-4- carboxylic acid methyl ester (56 mg, 0.243 mmol), DIPEA (83 uL, 0.486 mmol), 18-crown-6 (1.29 g, 4.86 mmol) and CsF (38 mg, 0.243 mmol) is heated to 120C overnight. The mixture is then evaporated and the residue is purified by prep. HPLC (Prep-HPLC-3 conditions) to give methyl 2-(3-((2-(difluoromethoxy)-6-methylpyridin-3- yl)carbamoyl)-3-(2-isopropylphenyl)azetidin-1 -yl)-1 -methyl-1 H-imidazole-5-carboxylate Ex 18-35 (20 mg, 16%) as a yellow oil. LCMS-1 : tR = 1.16 min, [M+1]+ 514.19.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route Methyl 2-bromo-1-methyl-1H-imidazole-5-carboxylate, its application will become more common.

Reference:
Patent; IDORSIA PHARMACEUTICALS LTD; BOLLI, Martin; BROTSCHI, Christine; LESCOP, Cyrille; WILLIAMS, Jodi T.; (0 pag.)WO2019/234115; (2019); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 33529-02-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 33529-02-1, name is 1-Decyl-1H-imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: Briefly, a mixture of alkylimidazoles such as 1-methyl-1H-imidazole (MIM), 1-hexyl-1H-imidazole(HIM), 1-octyl-1H-imidazole (OIM), and 1-decyl-1H-imidazole (DIM) (1 mmol), as well as cinnamylchloride (1 mmol) solvent-free were microwaved to 200 MW at 80 C for 5 min (optimumreaction condition). Reaction completion was marked by separation of dense IL. Products suchas 1-methyl-3-cinnamylimidazolium chloride [CMIM]Cl, 1-hexyl-3-cinnamylimidazolium chloride[CHIM]Cl, 1-octyl-3-cinnamylimidazolium chloride [COIM]Cl, and 1-decyl-3-cinnamylimidazolium chloride [CDIM]Cl were isolated by decanting toluene to remove any unreacted starting materialsand solvents. Subsequently, ILs were rinsed with diethyl ether (4 10 mL) separating afterward thislatter layer by decantation. In each case, ILs were finally dried under reduced pressure to get rid of thevolatile organic compounds.

The synthetic route of 1-Decyl-1H-imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Doria, Oscar Forero; Castro, Ricardo; Gutierrez, Margarita; Valenzuela, Diego Gonzalez; Santos, Leonardo; Ramirez, David; Guzman, Luis; Molecules; vol. 23; 9; (2018);,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3314-30-5, name is 1H-Benzo[d]imidazole-2-carbaldehyde, A new synthetic method of this compound is introduced below., Recommanded Product: 3314-30-5

A mixture of methyl phosphonoacetate(7.77 g, 0.037 mmol), potassium carbonate (9.38 g, 0.068 mmol) was dissolved100 mL of tetrahydrofuran, and the mixture was stirred at room temperature for half an hour and then slowly added dropwise to the above tetrahydrofuran solution. The temperature was raised to 66 CStir for 24 hours. After completion of the reaction, filtration was carried out, and most of the tetrahydrofuran was distilled off under reduced pressure. 300 mL of ethyl acetate was added, washed with waterTimes, saturated sodium chloride solution washed once, anhydrous sodium sulfate drying overnight. The solvent was concentrated under reduced pressure and the column chromatography gave pale yellowThe yield was 65%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Shenyang Pharmaceutical University; Zhao Linxiang; Liu Dan; Li Kun; Ma Tianyi; Jing Yongkui; (13 pag.)CN107118249; (2017); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Some common heterocyclic compound, 52099-72-6, name is 1-(Prop-1-en-2-yl)-1H-benzo[d]imidazol-2(3H)-one, molecular formula is C10H10N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. name: 1-(Prop-1-en-2-yl)-1H-benzo[d]imidazol-2(3H)-one

Added to the reaction container 1-allyl benzimidazol-2-one (2) 0.19mol, glycol 140 ml, sodium sulfite 0.28mol, raising the temperature of the solution to 40 C, control the stirring speed 130rpm, dropwise 1-amino-3-bromo-propane 0.25mol, dropping time control in 3h, reaction 5h, the mass fraction of the reactants are poured into 25% sodium chloride solution, used for quality fraction of 65% cyclohexanol extracting 7 times, cyclohexanol extracted solution with calcium oxide drying, evaporate the solvent, get oily 1-allyl-3 – (3-chloro-propyl) benzimidazole-2-one

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 52099-72-6, its application will become more common.

Reference:
Patent; Chengdu Cardiff Science and Techn Co., Ltd; Liao, Ruer; (5 pag.)CN105439960; (2016); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 930-62-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 930-62-1, name is 2,4-Dimethylimidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

a. 8-(2,4-Dimethyl-1H-imidazol-1-yl)-7-trifluoromethyl[1,2,4]triazolo-[4,3-a]quinoxaline-1,4(2H,5H)-dione The title compound was prepared from 4-amino-2-chloro-5-nitrobenzotrifluoride and 2,4-dimethylimidazole by a method analogous to the method described in example 4. M.p.>330 C. 1 H-NMR (DMSO-d6): delta2.02 (s, 3H), 2.11 (s, 3H), 6.91 (s, 1H), 7.69 (s, 1H), 8.44 (s, 1H), 12.15 (br.s, 1H), 13.15 (br. s, 1H). MS (m/e): 364 (M+, 100%).

The synthetic route of 2,4-Dimethylimidazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Novo Nordisk A/S; US5532236; (1996); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 1003-21-0, The chemical industry reduces the impact on the environment during synthesis 1003-21-0, name is 5-Bromo-1-methyl-1H-imidazole, I believe this compound will play a more active role in future production and life.

A solution of 5-bromo-1-methyl-1H-imidazole (25.0 g, 155 mmol; dried over 3 A molecular sieves, then filtered) in DCM (310 mL) was stirred in an ice bath while iPrMgCl (72 mL, 2.01 M solution in THF, 145 mmol) was added rapidly dropwise under argon via pressure-equalizing addition funnel. Residual iPrMgCl was rinsed down with 50 mL THF, and the ice bath was removed and the reaction stirred for 25 minutes. A solution of tert-butyl 4-formylpiperidine-1-carboxylate (27.6 g, 130 mmol) in THF (65 mL) was added dropwise over ?5 minutes via pressure-equalizing addition funnel at room temperature. After stirring 1 hour at room temperature, the yellow mixture was quenched with 5 M aqueous NH4Cl (250 mL) in one portion. The organic layer was dried (Na2SO4), filtered, and concentrated to provide the crude title compound as a clear light amber oil.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Bromo-1-methyl-1H-imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Fourie, Anne; Xue, Xiaohua; Cummings, Maxwell D.; US2015/105404; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16681-59-7, name is 2-Bromo-1-methyl-1H-imidazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-Bromo-1-methyl-1H-imidazole

Compound 7a (100 mg, 268 mumol), 2-bromo-1-methyl-1H-imidazole (65 mg, 402 mumol), triethylamine (73 muL, 541 mumol), and dimethylformamide (2 mL) were combined in a sealed tube. The mixture was sparged for 2 minutes with nitrogen, and bis(triphenylphosphine) palladium dichloride (19 mg, 27 mumol) was added followed by copper iodide (10 mg, 53 mumol). The mixture was sparged again with nitrogen and stirred for 20 minutes at 70 C under microwave irradiation. The reaction was diluted with ethyl acetate (50 mL), washed with a saturated solution of ammonium chloride (50 mL). The organic phase was dried over sodium sulfate and concentrated under reduced pressure and purified by flash chromatography on silica gel (DCM/MeOH: 96/4) to give compound 83 (62 mg, 137 mumol, 51%).1H NMR (400 MHz, Acetone- d6) delta 9.51 (s, 1H), 8.35 (s, 1H), 7.99 (ddd, J = 13.2, 7.4, 2.6 Hz, 1H), 7.57- 7.48 (m, 1H), 7.34 (dt, J = 10.5, 9.0 Hz, 1H), 7.14 (d, J = 1.2 Hz, 1H), 6.92 (d, J = 1.2 Hz, 1H), 4.46 (d, J = 5.8 Hz, 2H), 3.75 (s, 3H), 3.70 (s, 3H), 2.46 (s, 3H), 2.32 (s, 3H). 19F NMR (377 MHz, Acetone-d6) delta -139.91- -140.01 (dt, J = 22.1, 11.6 Hz), -147.12- – 147.23 (dt, J = 20.5, 10.4 Hz). MS (ESI): m/z [M+H]+ calcd for C23H22F2N5O3 : 454.4, found: 454.4

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; EMORY UNIVERSITY; SCHINAZI, Raymond F.; BOUCLE, Sebastien; AMBLARD, Franck; SARI, Ozkan; BASSIT, Leda; (169 pag.)WO2017/156255; (2017); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 288-32-4, name is 1H-Imidazole, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 1H-Imidazole

General procedure: The zwitterionic surfactants synthesis was performed by adaptation of a literature procedure [22],which consists of two steps: the synthesis of an akyl imidazole molecule followed an alkylationutilizing 1,3-propane sultone. An imidazole solution (1.30 g, 0.0191 mol) in acetonitrile (10 mL) was added to a round-bottom flask containing potassium hydroxide (0.76 g, 0.013 mol) and potassium carbonate (0.50 g, 0.0036 mol).Then, a solution of n-alkyl bromide (0.012 mol) was added dropwise to the mixture, and the reaction proceeded for 16 h at 80 C under continuous stirring. After this period, the solids were removed byfiltration and the solution was diluted in 100 mL of ethyl acetate and washed three times with 50 mLof distilled water. The organic phase was dried with anhydrous magnesium sulfate, filtrated and thesolvent was evaporated under vacuum, giving a yellow residue. The given product was characterizedby 1H-NMR in CDCl3.

According to the analysis of related databases, 288-32-4, the application of this compound in the production field has become more and more popular.

Reference:
Article; Modenez, Iago A.; Sastre, Diego E.; Moares, Fernando C.; Marques Netto, Caterina G.C.; Molecules; vol. 23; 9; (2018);,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem