Author: Jessica.F

Synthetic Route of 614-97-1, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 614-97-1 as follows.

a 4-Iodo-5-methyl-1H-benzoimidazole A solution of 5-methyl-1H-benzoimidazole (132 mg, 1.0 mmol) and NIS (248 mg, 1.10 mmol) in 1 mL of TFA was reflux for 1 hr and then cooled to RT. Treated with 30 mL of EtOAc, the mixture was neutralized with sat. NaHCO3 solution. The organic layer was washed with H2O (10 mL), brine (10 mL) and dried (Na2SO4). Removal of the solvent under reduced pressure followed by flash chromatography of the residue on silica gel (5% MeOH/CH2Cl2) gave 78 (30%) of product as a white solid: 1H-NMR (CDCl3; 400 MHz) delta 8.07 (d, 1H), 7.57 (br s, 1H), 7.22 (d, 1H, J=8.4 Hz), 2.59 (s, 3H). Mass spectrum (ESI, m/z): Calcd. for C8H7IN2, 259.0 (M+H), found 259.2.

According to the analysis of related databases, 614-97-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; 3-Dimensional Pharmaceuticals, Inc.; US2004/9995; (2004); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 3314-30-5, name is 1H-Benzo[d]imidazole-2-carbaldehyde, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3314-30-5, name: 1H-Benzo[d]imidazole-2-carbaldehyde

Example 5 3-(1H-benzimidazol-2-methylene)-5-(2-methylphenylaminosulfo)-2-indolone (Indo 5) 0.15 g (0.5 mmol) 5-(2-methylphenylaminosulfo)-2-indolone and 0.10 g (0.685 mmol) 1H-benzimidazol-2-formaldehyde were suspended in 6 mL anhydrous ethanol, followed by addition of 2 drops of piperidine. The mixture was heated and refluxed in an oil bath for 30 min. A large quantity of yellow solid was precipitated, filtered, and washed with anhydrous ethanol, to obtain 0.12 g pale yellow solid, with a yield of 55.8percent. Analytical result by NMR spectroscopy: 1H-NMR (DMSO-d6) delta (ppm): delta13.82 (s, 1H), 11.70 (s, 1H), 9.44 (s, 1H), 8.20 (s, 1H), 8.00 (s, 1H), 7.82 (d, 1H, J=8.0 Hz), 7.78 (d, 1H, J=8.0 Hz), 7.61 (dd, 1H, J=16.8 Hz), 7.38 (t, 1H), 7.30 (t, 1H), 7.00-7.15 (m, 5H), 2.09 (s, 3H). ESI-MS m/z: 429 [M-H]+ (100). Analysis showed that, the pale yellow solid is 3-(1H-benzimidazol-2-methylene)-5-(2-methylphenylaminosulfo)-2-indolone, the structural formula of which is shown in Formula I, wherein R1 is 2-methylphenylaminosulfo, and R2 is hydrogen.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Benzo[d]imidazole-2-carbaldehyde, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; INSTITUTE OF RADIATION MEDICINE, CHINA ACADEMY OF MILITARY MEDICAL SCIENCES PLA; Yang, Xiaoming; Wang, Lin; Li, Changyan; Zhan, Yiqun; Liu, Jing; Luo, Teng; Yan, Haiyan; Zhang, Shouguo; Li, Wei; Wen, Xiaoxue; Peng, Tao; Li, Lu; (18 pag.)US2016/151334; (2016); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

These common heterocyclic compound, 75370-65-9, name is 4-Amino-1H-benzo[d]imidazol-2(3H)-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 75370-65-9

Preparation of 1-(4-(dimethylamino)benzyl)-3-(2,3-dihydro-2-oxo-1H-benzo[d]imidazol-4-yl)urea 4-(aminomethyl)-N,N-dimethylbenzenamine 2i (1 g, 6.9 mmol) was dissolved in 40 ml of AcOEt and at 0C triphosgene (2 g, lequiv.) was added to the solution. The mixture was warmed at 80C for 4 hours then evaporated and the residue was dissolved in 20 ml of DMF. The solution of the isocyanate was added dropwise to a solution in DMF (10 ml) of compound 1a (1 g, 6.9 mmol) and the mixture was warmed at 80C for 8 hours. (TLC AcOEt). The solvent was evaporated and the crude was dissolved in AcOEt (50 ml) and washed with water (1 X 30 ml) and brine. The organic phase was dried over sodium sulfate and concentrated under vacuum. The purification of the crude residue by chromatographic column gave 350 mg of a white solid. Yield = 16% 1HNMR (DMSO, 200 MHz) delta 2.51 (6H, s), 4.18 (2H, d, J = 5.6 Hz), 6.58 (2H, m), 6.69 (2H, d, J = 8.8 Hz), 6.86 (2H, m), 7.14 (2H, d, J = 8.8 Hz), 8.18 (1H, s), 9.98 (1H, bs), 10.58 (1H, bs); [M+1] 326.5 (C17H19N5O2 requires 325.37).

The synthetic route of 4-Amino-1H-benzo[d]imidazol-2(3H)-one has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pharmeste S.r.l.; EP2377850; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 1243204-92-3, name is 3-Methoxy-4-(4-methyl-1H-imidazol-1-yl)benzonitrile, This compound has unique chemical properties. The synthetic route is as follows., Product Details of 1243204-92-3

Example B3 a) Preparation of compound 4 A mixture of intermediate 1 (443 mg, 2.08 mmol), 4-fluorobenzoic acid hydrazide (320 mg, 2.08 mmol) and K2CO3 (143 mg, 1.04 mmol) in n-BuOH (15 ml) was heated in the microwave at 120 0C for 12 h. The solvent was removed under reduced pressure and the resulting residue partitioned between EtOAc/H2O. The phases were separated. The aq. phase was extracted with EtOAc, and the combined organic extracts were washed with brine and dried (MgSO^. Filtration and concentration under reduced pressure gave the crude product which was purified by column chromatography over silica gel (eluent: 100:0 to 90: 10 DCM/MeOH, gradient elution). The product fractions were collected and evaporated to yield 450 mg of compound 4 (62.0 %).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 1243204-92-3.

Reference:
Patent; ORTHO-MCNEIL-JANSSEN PHARMACEUTICALS, INC; WU, Tongfei; GIJSEN, Henricus, Jacobus, Maria; ROMBOUTS, Frederik, Jan, Rita; BISCHOFF, Francois, Paul; BERTHELOT, Didier, Jean-Claude; OEHLRICH, Daniel; DE CLEYN, Michel, Anna, Jozef; PIETERS, Serge, Maria, Aloysius; MINNE, Garrett, Berlond; VELTER, Adriana, Ingrid; VAN BRANDT, Sven, Franciscus, Anna; SURKYN, Michel; WO2011/6903; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1003-21-0, name is 5-Bromo-1-methyl-1H-imidazole, A new synthetic method of this compound is introduced below., HPLC of Formula: C4H5BrN2

A solution of EtMgBr (3.0 M in diethylether, 8.5 mL, 25.689 mmol) was added dropwise, over a 25 minutes period, to a solution of 5-bromo-1-methyl-1H-imidazole (4.1 g, 25.689 mmol) in dry DCM (25 mL). The mixture was stirred at room temperature for 15 minutes, cooled in an ice-brine bath and N-methoxy-N,3-dimethyl-4-nitrobenzamide (4.8 g, 21.408 mmol, Intermediate 40: step a) dissolved in 10 mL of DCM was added dropwise. A dark brown solid mass formed. The ice bath was removed and mixture stirred at room temperature for 48 hours. Water was added to the suspension followed by 6M aqueous HCl slowly to neutralize the mixture (pH=6-7). More DCM was added and layers separated. The organic layer was dried over Na2SO4, filtered and concentrated. Et2O was added, the slurry sonicated, and precipitates filtered to provide the title compound as a tan solid.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Janssen Pharmaceutica NV; Leonard, Kristi A.; Barbay, Kent; Edwards, James P.; Kreutter, Kevin D.; Kummer, David A.; Maharoof, Umar; Nishimura, Rachel; Urbanski, Maud; Venkatesan, Hariharan; Wang, Aihua; Wolin, Ronald L.; Woods, Craig R.; Pierce, Joan; Goldberg, Steven; Fourie, Anne; Xue, Xiaohua; US2014/107094; (2014); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 28890-99-5,Some common heterocyclic compound, 28890-99-5, name is 5H-Benzo[d]benzo[4,5]imidazo[1,2-a]imidazole, molecular formula is C13H9N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

a) 20.0 g (78.8 mmol) 1 ,3-dibromo-5-fluoro-benzene, 16.3 g (78.8 mmol) 6H- benzimidazolo[1 ,2-a]benzimidazole and 43.5 g (0.315 mmol) potassium carbonate in 200 ml DMF are stirred for 17 h at 170 C. The reaction mixture is filtered hot and the precipitate from the mother liquor is filtered after cooling. The product is washed with water and ethanol and decocted with diethyl ether and ethanol. Yield 21.2 g (61 %).1 H NMR (400 MHz, THF-d8): delta 8.21-8.26 (m, 4H), 7.98-7.8.00 (m, 1 H), 7.68-7.73 (m, 2H), 7.31-7.49 (m, 4H).

The synthetic route of 28890-99-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; BASF SE; SCHAeFER, Thomas; FIGUEIRA DUARTE, Teresa, Marina; SCHILDKNECHT, Christian; LANGER, Nicolle; HEINEMEYER, Ute; WOLLEB, Heinz; WATANABE, Soichi; LENNARTZ, Christian; WAGENBLAST, Gerhard; WOLLEB, Annemarie; BARDON, Kristina; BENEDITO, Flavio, Luiz; WO2012/130709; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 89830-98-8, name is 5-Cyclopropyl-1H-imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 89830-98-8, HPLC of Formula: C6H8N2

To a solution of 3-bromo-7,8-dihydro-6H-1,6-naphthyridin-5-one (0.100 g, 0.437mmol) and 4-cyclopropyl-1H-imidazole (0.0709 g, 0.65 5 mmol) in DMF (5.00 mL) is addedK2C03 (0.18 1 g, 1.31 mmol). The mixture is degassed with a stream of N2 for 5 minutes. DMEDA (0.0193 g, 0.218 mmol) and CuT (0.0832 g, 0.437 mmol) are added sequentially and the resulting mixture is stirred at 110 C for 16 hours under N2. The mixture is extracted with EtOAc (2x75mL) and washed with saturated brine (3 x25 mL). The organic extracts aredried over Na2SO4, filtered, and evaporated to dryness. The crude product is purified by silica gel flash chromatography, eluting with a gradient of 0% to 5% MeOH in DCM to give the title compound (0.060 g, 48.6%) as a light green solid. ES/MS (m/z): 255.0 (M+H), ?H NMR (400 IVIHz, CDC13) 8.74 (d, J=3.2 Hz, 1H), 8.33 (d, J=2.4 Hz, 1H), 7.81 (s, 1H), 7.10 (s, 1H), 6.31 (br s, 1H), 3.73 (dt, J=3.2, 6.8 Hz, 2H), 3.39 -3.15 (m, 2H), 1.99- 1.90 (m, 1H),0.96-0.88(m,4H)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Cyclopropyl-1H-imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ELI LILLY AND COMPANY; LILLY CHINA RESEARCH AND DEVELOPMENT CO., LTD; LEI, Hui; LIU, Gang; TIAN, Yuan; ZHANG, Haizhen; (0 pag.)WO2018/160406; (2018); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Application of 35203-44-2, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 35203-44-2 name is 1-Propyl-1H-imidazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

(Reference Example 19) Synthesis of 1-propyl-1H-imidazole-2-carbaldehyde: A solution of 1-propyl-1H-imidazole (1.67 g, 15.2 mmol) in tetrahydrofuran (30.4 mL) was cooled to -78°C. n-Butyllithium (1.62 M n-hexane solution, 10.3 mL, 16.7 mmol) was added to the reaction liquid at -78°C. The reaction liquid was stirred at the same temperature for 1 hour and then N,N-dimethylformamide (1.41 mL, 18.2 mmol) was added at -78°C. After the reaction liquid was stirred at the same temperature for 1 hour, the temperature of the reaction liquid was raised to room temperature. A saturated aqueous solution of ammonium chloride was added to the reaction liquid and then ethyl acetate was added. The organic layer was washed with a 10percent aqueous solution of sodium chloride and then dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated under reduced pressure. The residue was purified by flash column chromatography (silica gel, n-hexane/ethyl acetate) to obtain 1-propyl-1H-imidazole-2-carbaldehyde (0.492 g, 3.56 mmol, 24percent) as a colorless oil. 1H-NMR (400 MHz, CDCl3) delta: 0.91-0.95 (3H, m), 1.79-1.84 (2H, m), 4.34-4.38 (2H, m), 7.15 (1H, s), 7.28 (1H, s), 9.82 (1H, s). ESI-MS: m/z= 139 (M+H)+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Propyl-1H-imidazole, and friends who are interested can also refer to it.

Reference:
Patent; Toray Industries, Inc.; ARAI Tadamasa; MORITA Yasuhiro; UDAGAWA Shuji; ISEKI Katsuhiko; IZUMIMOTO Naoki; (95 pag.)EP3263565; (2018); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Some common heterocyclic compound, 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, molecular formula is C8H6F2N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 705-09-9

4-(4,6-Dichloro-1,3,5-triazin-2-yl)morpholine was added to a 500 mL single-mouth bottle (2)11.33g (48.2mmol), anhydrous potassium carbonate 6.66g (48.2mmol), DMF 150mL2-Difluoromethyl-1H-benzimidazole (3) 8.10 g (48.2 mmol) was added with stirring.2 hours at room temperature, add 200 mL of water, let stand, precipitate solids, filter under reduced pressure, with a small amountIt was washed with water and dried to give a white powdery solid 15.21 g The crude product yield was 86.03%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 705-09-9, its application will become more common.

Reference:
Patent; Shenyang Pharmaceutical University; Sun Tiemin; Zhou Zhixu; Du Lei; Yan Ning; Wang Yude; Li Linwei; (14 pag.)CN105130960; (2018); B;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 930-62-1 as follows. Application In Synthesis of 2,4-Dimethylimidazole

(3) taking 20 mmol of 2,4-dimethylimidazole in 10 mL of DMSO,Add 40 mmol of ground NaOH,After heating to 60 C, 20 mmol of chloromethylbenzotriazole was added, heated in a water bath at 60 C for 60 min, cooled to room temperature, poured into 50 g of ice water, and a precipitate was formed by stirring, and suction filtration was performed.The precipitate was washed 3 times with water.Obtain a crude product;(4) The crude product was recrystallized by adding ethyl acetate at 78 C to obtain yellow-white crystals, which was the ligand 1-(benzotriazole-1-methyl)-1-(2,4-dimethyl Imidazole).

According to the analysis of related databases, 930-62-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Henan University of Traditional Chinese Medicine; Wang Xia; Ling Ning; Yang Jing; Zeng Dai; Cheng Di; Zhang Yawen; Yang Huaixia; (12 pag.)CN108774252; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem