Category: 288-32-4

Application of 288-32-4, These common heterocyclic compound, 288-32-4, name is 1H-Imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Imidazole was chosen as the model substrate for theN-arylation reaction in presence of electrospun CuO NFsas catalyst. The reaction flask was packed with 0.1 mM ofCuO NFs, 5 ml of DMF followed by the charging of imidazole(1 mM) and bromobenzene (1 mM) at 110 C withconstant stirring. The progress of the reaction was monitoredby thin layer chromatography (TLC). After completion,the catalyst was separated by centrifuge and washedseveral times with water and ethyl acetate for re-use. Theproduct was isolated by evaporation of solvent in vacuumand purified. The obtained product was characterized withFT-IR for functional group identification and GC-MS for structural confirmation.

Statistics shows that 1H-Imidazole is playing an increasingly important role. we look forward to future research findings about 288-32-4.

Reference:
Article; Sukumar, Thenmozhi; Nallasamy, Dharmaraj; Journal of Nanoscience and Nanotechnology; vol. 18; 1; (2018); p. 234 – 241;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 288-32-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-32-4, name is 1H-Imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Under nitrogen, imidazole was dissolved in anhydrous THF, and an appropriate amount of acetic anhydride was dropped slowly into the solution; then reaction was carried out for about half an hour accompanied by exothermic phenomena. After the reaction was completed, the solvent was removed by vacuum reduced pressure concentration to generate a solid product. Then, the obtained solid was rinsed with n-hexane and filtered to provide compound 11 as white solid, with yield of about 98percent.

The synthetic route of 1H-Imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Eternal Chemical Co., Ltd.; Cheng, Pi-Jen; Chou, Meng-Yen; Lee, Chuan Zong; Wu, Chung-Jen; US2013/172569; (2013); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 288-32-4, The chemical industry reduces the impact on the environment during synthesis 288-32-4, name is 1H-Imidazole, I believe this compound will play a more active role in future production and life.

General procedure: In a flame-driedvessel, equipped with a magnetic stirrer, under argon atmosphere,were added 0.3 mL of anhydrous acetonitrile, the nucleophile (imidazoleor benzimidazole – 0.75 mmol, 1.5 eq.), the electrophile(alkyl or aryl iodide – 0.5 mmol, 1 eq.), the base (1 mmol, 2 eq.),and the copper catalyst (0.05 mmol – 10% loading). The reactionvessel was heated to 80 C and left under stirring for 24 h. Thereaction mixture was then allowed to cool to room temperature,diluted with dichloromethane (5 mL) and filtered through celite. The celitepad was further washed with dichloromethane(2 x 5 mL). The combined organic phases were washed with water(2 x 5 mL) and brine (2 x 5 mL). The organic solvents were thenremoved in vacuo to yield the crude product, which was purifiedby flash column chromatography on silica gel using a gradient mixtureof ethyl acetate/petroleum ether as eluent. The 1H and 13CNMR spectral data for all N-arylatedimidazoles and benzimidazolesare in full agreement with those reported to literature [57-61].

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Milenkovi?, Milica R.; Papastavrou, Argyro T.; Radanovi?, Du?anka; Pevec, Andrej; Jagli?i?, Zvonko; Zlatar, Matija; Gruden, Maja; Vougioukalakis, Georgios C.; Turel, Iztok; An?elkovi?, Katarina; ?obelji?, Bo?idar; Polyhedron; vol. 165; (2019); p. 22 – 30;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

288-32-4, name is 1H-Imidazole, belongs to imidazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Safety of 1H-Imidazole

Synthesis of 1-benzylimidazole 9 illustrated by step (a) of FIG. 3. (0085) According to the selected experimental protocol, 44 g of imidazole (0.65 mol.), 100 g of benzyl chloride (0.78 mol.), and 60 g of KOH (1.07 mol.) in 700 ml of THF are placed in a 1-liter balloon flask. The reaction mixture is brought to reflux for 120 h, then cooled at ambient temperature. The organic phase is filtered and the solvent is evaporated under reduced pressure. The obtained solid product is dissolved in 500 ml of CH2Cl2, then washed with water (3¡Á100 ml). The organic phase is dried on Na2SO4, filtered, then evaporated under reduced pressure. The collected solid is recristallized in toluene to yield 67 g of desired product.

The synthetic route of 288-32-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Peugeot Citroen Automobiles SA; CNRS (Centre National de la Recherche Scientifique); Glipa, Xavier; Ameduri, Bruno; Delon, Louis; Jones, Deborah; Roziere, Jacques; Frutsaert, Guillaume; US8859160; (2014); B2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 288-32-4, A common heterocyclic compound, 288-32-4, name is 1H-Imidazole, molecular formula is C3H4N2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Weighed 0.680 g (10 mmol) of imidazole,1.240 g (10 mmol) of p-fluorobenzaldehyde and 1.380 g (10 mmol) of anhydrous potassium carbonate were weighed and dissolved in 25 mL of N, N-dimethylformamide and added to a 50 mL four-necked flask equipped with a thermometer and a stirrer The flask. 60 under constant temperature for 20h, cooled to room temperature, poured into 100mL ice water, a yellow solid precipitation, filtration, recrystallization with ethanol, vacuum drying at 50 for 8h, that is, 4 – imidazolyl benzaldehyde.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Qilu University of Technology; Xu Ting; Duan Hongdong; Bu Juan; (12 pag.)CN104130192; (2017); B;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 288-32-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-32-4, name is 1H-Imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A 25 mL flask with a magnetic stirring bar was charged with CuI(9.6 mg, 0.05 mmol), metformin (0.1 mmol), Cs2CO3 (652 mg,2.0 mmol), imidazole (1.0 mmol), an aryl halide (1.1 mmol), andDMF (5 mL). The mixture was stirred for 10 min at room temperature,and then heated to 110?C for the appropriate amount of time(see Table 2). The progress of the reaction was monitored by TLC.After completion of the reaction, the mixture was extracted with EtOAc (5 1 mL) and the organic phase separated and evaporated. Further purification by column chromatography gave the desired coupled product.

The synthetic route of 1H-Imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Article; Ghorbani-Vaghei, Ramin; Hemmati, Saba; Veisi, Hojat; Tetrahedron Letters; vol. 54; 52; (2013); p. 7095 – 7099;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 288-32-4, The chemical industry reduces the impact on the environment during synthesis 288-32-4, name is 1H-Imidazole, I believe this compound will play a more active role in future production and life.

Part B: To the dichloromethane solution of the hydroxyethyl compound of Part A (1 g, 1.9 mmol) was added thionyl chloride (3.8 mmol) and reaction solution was stirred at ambient temperature for 12 hours. Concentration in vacuo provided the chloride as a light yellow gel. To the solution of the chloride and potassium carbonate (0.54 g, 3.8 mmol) in N,N-dimethylformamide (5 mL) was added imidazole (0.4 g, 5.7 mmol) and solution was stirred at ambient temperature for 12 hours. Then N,N-dimethylformamide was evaporated under high vacuum and the residue was diluted with ethyl acetate. The organic layer was washed with water and dried over magnesium sulfate. Concentration in vacuo and chromatography on silica eluding with ethyl acetate/hexane provided the imidazole ethyl ester as a light yellow gel (0.82 g, 75.2percent).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Pharmacia Corporation; US6750228; (2004); B1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-32-4 as follows. HPLC of Formula: C3H4N2

To a solution of imidazole (13.6 g, 0.2 mol) in 1 L of DCM was added BrCN (7.4 g, 66 mmol), and the mixture was heated at reflux for 30 minutes. The mixture was cooled to RT, and the white precipitate removed by filtration, and the filtrate concentrated to 100 mL then cooled to 0 C. for 2 days. The crystallized solid was filtered and washed with cold DCM, then dried in vacuo to give the desired product (8.8 g) as a white solid.

According to the analysis of related databases, 288-32-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Merck Sharp & Dohme Corp.; Coburn, Craig A.; Ludmerer, Steven W.; Liu, Kun; Wu, Hao; Soll, Richard; Zhong, Bin; Zhu, Jian; (155 pag.)US2019/127365; (2019); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 288-32-4, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 288-32-4 as follows.

To a solution of 1H-Imidazole (5 g, 73.5 mmol) in THF was added sodium hydride (1.8 g, 45 mmol) and stirred at room temperature for 0.5 hour before addition of then bromo-acetonitrile (8.8 g, 73.9 mmol) and stirring at room temperature for 2 hours. The reaction was quenched via the addition of water (50 mL) and saturated ammonium chloride (50 mL) solution and the mixture was extracted with ethyl acetate (100 mL*3). The combined organics layer was dried over anhydrous magnesium sulfate, filtered, and concentrated. The crude residue was purified on silica gel (petroleum ether:ethyl acetate=10:1) to afford 2-(1H-imidazol-1-yl)acetonitrile (4.6 g, 59%) as a yellow oil. LRMS m/z: 108 [M+H+].

According to the analysis of related databases, 288-32-4, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Albrecht, Brian K.; Bellon, Steven F.; Gehling, Victor S.; Harmange, Jean-Christophe; LeBlanc, Yves; Liang, Jun; Magnuson, Steven; Tsui, Vicki; Zhang, Birong; US2015/65522; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 288-32-4, name is 1H-Imidazole, A new synthetic method of this compound is introduced below., Quality Control of 1H-Imidazole

(a) N-Benzylimidazole To a solution of 24 g (1 mol) of sodium hydride in 500 ml of N,N-dimethylformamide, there was added, drop-by-drop, a solution of 68 g (1 mol) of imidazole in 150 ml of N,N-dimethylformamide. The medium was stirred for 2 hours and then 126.6 g (1 mol) of benzyl chloride were added. The solvent was eliminated and the residue was taken up with ethyl acetate and washed with water. The organic phase was dried and concentrated to provide an oil which crystallized when cold. In this manner, N-benzylimidazole was obtained in a yield of 70%.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Sanofi; US5017579; (1991); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem