Category: 4857-06-1

Adding a certain compound to certain chemical reactions, such as: 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4857-06-1, COA of Formula: C7H5ClN2

Step 1: 1.00 g, 6.5 mmol of 2-chlorobenzimidazole,Dissolved in 15 mL of tetrahydrofuran,Add 288mg, 7.2mmol 60% sodium hydride,After stirring for half an hour, 0.60 mL, 9.8 mmol of methyl iodide was added.The mixture was stirred at room temperature for 2 hours.Then add water, extract with ethyl acetate, wash with water, wash with brine, dry, concentrate, and then purify by column chromatography.1-Methyl-2-chlorobenzimidazole was obtained, a pale yellow liquid, 0.95 g, yield 88%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Chloro-1H-benzo[d]imidazole, and friends who are interested can also refer to it.

Reference:
Patent; Guangzhou Baiting Pharmaceutical Technology Co., Ltd.; Wu Zhong; Li Jingrong; (16 pag.)CN108997394; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, A new synthetic method of this compound is introduced below., name: 2-Chloro-1H-benzo[d]imidazole

2-Chloro-1H-benzimidazole (7.5 g, 49 mmol) was dissolved in dimethylformamide (20 mL),and the reaction mixture was cooled to oo C. Sodium hydride ( 60% dispersion in mineral oil 2.16 g,5 5.4 mmol) was carefully added. The reaction mixture was stirred at ambient temperature for 1 hour,and after that iodomethane (8.37g, 59 mmol) was added. The reaction mixture was stirred at ambienttemperature overnight, and then water (200 mL) was added. The solid was collected by filtration toafford 5 g, 61% of the titled compound as a white solid. 1H NMR (300 MHz, DMSO-d6) o ppm 3.79(s, 3H), 7.21-7.33 (m, 2H), 7.58 (t, J=7.0 Hz, 2H).

The synthetic route of 4857-06-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ABBVIE INC.; GOMTSIAN, Artour; DEKHTYAR, Tatyana; FRANK, Kristine E.; FRIEDMAN, Michael M.; JOSEPHSOHN, Nathan; MOLLA, M-Akhteruzz; VASUDEVAN, Anil; NG, Teresa; SHAFEEV, Mikhail; WO2014/5129; (2014); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4857-06-1, Safety of 2-Chloro-1H-benzo[d]imidazole

General procedure: Alternatively, to a stirred mixture of 2-chlorobenzimidazole (1.0 eq.) and R3CH2Br (1.0 eq.) in dimethylformamide was added N,N-diisopropylethylamine (1.5 eq.). The reaction mixture was heated to 110 C and stirred for 12 h. After the reaction was completed, the reaction mixture was cooled down to room temperature, diluted with ethyl acetate and washed with water. The organic layer was dried over anhydrous MgSO4 and concentrated in vacuo. The crude product was purified by flash column chromatography (ethyl acetate/hexane) to give desired product 1d.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Oh, Sangmi; Kim, Sungbum; Kong, Sunju; Yang, Gyongseon; Lee, Nakyung; Han, Dawoon; Goo, Junghyun; Siqueira-Neto, Jair L.; Freitas-Junior, Lucio H.; Song, Rita; European Journal of Medicinal Chemistry; vol. 84; (2014); p. 395 – 403;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 4857-06-1, A common heterocyclic compound, 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, molecular formula is C7H5ClN2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To 38.1 g (0.250 mol) 2-chlorobenzimidazole, 25.6 g 0.275 mol) aniline in 250 ml NMP 26.4 g(0.275 mmol) methane sulfuric acid is added. The reaction mixture is stirred at 100 00 for 3 hunder nitrogen. The reaction mixture is poured on a saturated solution of sodium hydrogencarbonate in water. The water phase is extracted with ethyl acetate. The organic phase is 3times washed with water and the organic phase is dried with magnesium sulfate. The solvent is removed in vacuum. The product is decocted in 100 ml dichloromethane.Yield 43.6 g (83%)The above reaction is carried out according to a procedure given in US20090186879 (page 57).1H NMR (400 MHz, DMSO-d6): oe = 10.9(s, 1H), 9.38 (s, 1H), 7.29-7.36(d, 2H), 2.29-7.36(m,4H), 6.96-7.02(m, 2H), 6.91-6.94 (m, 1H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; SCHAeFER, Thomas; KAWAMURA, Masahiro; BARDON, Kristina; NAGASHIMA, Hideaki; (315 pag.)WO2017/56055; (2017); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Some common heterocyclic compound, 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, molecular formula is C7H5ClN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 4857-06-1

2-Chloro-5-nitrobenzimidazole (19) To 210 mL of fuming HNO3, 2-chlorobenzimidazole (13.42 g, 87.95 mmole) was added portionwise over a period of 10 min with stirring and ice-H2 O cooling. After the addition, the cooling bath was removed and stirring was continued at room temperature overnight. This reaction mixture was cooled to ~0 C., poured into 300 mL of ice, and neutralized carefully with conc. NH4 OH to ~pH 8. The resulting suspension was filtered. The yellowish solid product was washed with portions of H2 O and air-dried. The filtrate and washings were combined and extracted with EtOAc (200 mL*2). The EtOAc solution was washed with sat. NaCl solution (200 mL*2), dried (Na2 SO4), and evaporated to give 1.3 g of a yellowish solid. The solid was combined with the major part of the product and was recrystallized from MeOH to give 16.34 g (5 crops, 94%) of 19 as yellowish crystals. mp 235-237

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4857-06-1, its application will become more common.

Reference:
Patent; The Regents of the University of Michigan; US5360795; (1994); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

4857-06-1, Adding a certain compound to certain chemical reactions, such as: 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4857-06-1.

Step3: Under nitrogen protection,2-Chlorobenzimidazole (1.41 g, 9.2 mmol) was added to the reaction vessel.Phenylboronic acid (1.02 g, 8.4 mmol),Tetrakistriphenylphosphine palladium (0.09g, 0.08mmol),Potassium carbonate (3.48g, 25.2mmol),Toluene 60mL, ethanol 20mL and distilled water 20mL,Stir at 120 C for 3 h.After the end of the reaction, the reaction was quenched with distilled water, ethyl acetate was extracted, and the organic layer was dried over MgSO..The solvent was removed by distillation under reduced pressure.After purification by silica gel column chromatography, Intermediate 75-3 (1.22 g, 75%) was obtained.

According to the analysis of related databases, 4857-06-1, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Changchun Hai Purunsi Technology Co., Ltd.; Dong Xiuqin; Cai Hui; (34 pag.)CN108409667; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

4857-06-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4857-06-1 name is 2-Chloro-1H-benzo[d]imidazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

The N-methyl-1H-benzo[d]imidazol-2-amine, used as starting material, can be prepared as follows:2-Chloro-1H-benzo[d]imidazole (20 g, 131.08 mmol) was charged to high pressure autoclave PV10832 (Hastelloy 450 ml) with methylamine (260 mL, 131.08 mmol) and sealed on its trolley and the resulting solution heated to 160 C. in high pressure blast cell 60 for 16 hours. The pressure in the autoclave reached 11 bar. The solvent was removed under reduced pressure to afford a brown oil. EtOH was added and the solvent again removed to afford a brown foam. The foam was dissolved in a minimum of hot acetone. This was then allowed to cool. The resultant solid was filtered affording N-methyl-1H-benzo[d]imidazol-2-amine (9.91 g, 51%); 1H NMR (400 MHz, DMSO-d6) 2.83 (3H, s), 6.87-7.00 (2H, m), 7.05-7.25 (2H, m), 7.49 (1H, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Chloro-1H-benzo[d]imidazole, and friends who are interested can also refer to it.

Reference:
Patent; ASTRAZENECA AB; US2011/306613; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

4857-06-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 4857-06-1 name is 2-Chloro-1H-benzo[d]imidazole, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

The N-methyl-1H-benzo[d]imidazol-2-amine, used as starting material, can be prepared as follows:2-Chloro-1H-benzo[d]imidazole (20 g, 131.08 mmol) was charged to high pressure autoclave PV10832 (Hastelloy 450 ml) with methylamine (260 mL, 131.08 mmol) and sealed on its trolley and the resulting solution heated to 160 C. in high pressure blast cell 60 for 16 hours. The pressure in the autoclave reached 11 bar. The solvent was removed under reduced pressure to afford a brown oil. EtOH was added and the solvent again removed to afford a brown foam. The foam was dissolved in a minimum of hot acetone. This was then allowed to cool. The resultant solid was filtered affording N-methyl-1H-benzo[d]imidazol-2-amine (9.91 g, 51%); 1H NMR (400 MHz, DMSO-d6) 2.83 (3H, s), 6.87-7.00 (2H, m), 7.05-7.25 (2H, m), 7.49 (1H, s).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Chloro-1H-benzo[d]imidazole, and friends who are interested can also refer to it.

Reference:
Patent; ASTRAZENECA AB; US2011/306613; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem