Category: 705-09-9

Adding a certain compound to certain chemical reactions, such as: 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 705-09-9, SDS of cas: 705-09-9

Compound 2 (425 muetaetaomicronIota, 1.0 eq.) is dissolved in DMF (2 ml) and cooled to -5C, treated with anhydrous potassium carbonate (1 .44 eq.) and 2-(difluoromethyl)-1 H-benzo[c/]- imidazole (1 .4 eq.), stirred for 30 min and further stirred at room temperature for 4 h. The reaction mixture is diluted with water and the precipitate is filtered and washed with small amounts of water. Purification is done by silica gel flash column chromatography. Rf: 0.72 (methylene chloride/methanol, 95:5 v/v); 1H NMR (CDCI3, 400 MHz) delta 8.43 (d, J = 7.8 Hz, 1 H), 7.90 (d, J = 7.6 Hz, 1 H), 7.71 -7.43 (m, 3H), 4.00-3.95 (m, 4H), 3.86-3.80 (m, 4H); 19F NMR (CDCI3, 400 MHz) delta -1 19.20 (d, J = 53.9 Hz, 2F).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(Difluoromethyl)-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; UNIVERSITY OF BASEL; CMILJANOVIC, Vladimir; CMILJANOVIC, Natasa; GIESE, Bernd; WYMANN, Matthias; WO2011/135520; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 705-09-9, These common heterocyclic compound, 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 2-(Difluoromethyl)-1H-benzo[d]imidazole (1 mol),chloro derivative (1 mol) and K2CO3 (2 mol) were taken inDMSO (10 v). The reaction mixture was heated to 130 C,stirred for 4 h. Then the reaction mixture was cooled to roomtemperature, diluted with water (50 v) extracted with EtOAC(2 x 50 v), evaporated the solvent under reduced pressure toget the crude compound. Crude products were purified bycolumn chromatography.

Statistics shows that 2-(Difluoromethyl)-1H-benzo[d]imidazole is playing an increasingly important role. we look forward to future research findings about 705-09-9.

Reference:
Article; Kasturi, Sivaprasad; Surarapu, Sujatha; Uppalanchi, Srinivas; Anantaraju, Hasitha Shilpa; Dwivedi, Shubham; Yogeeswari, Perumal; Ethiraj, Krishna S.; Anireddy, Jaya Shree; Letters in drug design and discovery; vol. 15; 2; (2018); p. 181 – 192;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 705-09-9 as follows. category: imidazoles-derivatives

Step d): 6-(4-chloro-6-(2-(difluoromethyl)-1 H-benzorc l imidazol-1 -yl)-1 ,3,5-triazin-2-yl)-2- oxa-6-azaspiro[3.31 heptane (22).Under nitrogen atmosphere an oven-dried round-bottom flask was charged with compound 21 (73.0 mg, 295 muiotatauiotaomicronIota, 1 .0 eq.) in dry DMF (2 ml_). The solution was cooled down to 0C and potassium carbonate (59.1 mg, 425 muiotatauiotaomicronIota, 1 .4 eq.) and 2-(difluoro- methyl)-1 /-/-benzoimidazole (69.5 mg, 414 muiotatauiotaomicronIota, 1.4 eq.) were added. The reaction mixture was stirred for 30 min at 0C and then for 2 h at RT. The solvent was removed under high vacuum and the remaining residue was purified directly by flash column chromatography (1 % MeOH/DCM) to yield the title compound as a white solid (53.7 mg, 48%). RF: 0.48 (DCM/MeOH, 95:5 v/v); 1H NMR (CDCI3, 400 MHz): delta 8.48 (d, J = 7.6 Hz, 1 H), 7.90 (d, J = 7.2 Hz, 1 H), 7.64 (t, J = 53.6 Hz, 1 H), 7.46-7.44 (m, 2H), 4.90 (s, 4H),4.49 (d, J = 9.6 Hz, 4H).

According to the analysis of related databases, 705-09-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; UNIVERSITY OF BASEL; CMILJANOVIC, Vladimir; CMILJANOVIC, Natasa; GIESE, Bernd; WYMANN, Matthias; WO2011/114275; (2011); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 705-09-9, Recommanded Product: 705-09-9

A mixture of the material so obtained, 2-difluoromethyl-lH-benzimidazole (0.435 g), potassium carbonate (1.36 g) and DMF (15 ml) was stirred under nitrogen and heated to 1100C for 24 hours. The resultant mixture was cooled, filtered and the filtrate was evaporated. There was thus obtained 4-chloro-2-(2-difluoromethylbenzimidazol-l-yl)- 6-[(35)-3-methylmorpholin-4-yl]py?midine (0.76 g) which was used without further purification.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-(Difluoromethyl)-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; ASTRAZENECA UK LIMITED; WO2008/32064; (2008); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 705-09-9

A solution of cyanuric chloride (922 mg, 5 mmol) in acetone (5 mL) was added to ice. A solution of 8-oxa-3-azabicyclo[3.2.1]octane hydrochloride (750 mg, 5 mmol) and triethylamine (2.1 mL, 15 mmol) in aqueous acetone was then added. After 20 min the precipitate was collected to give 1.0 g of a white powder which was a 7:3 mixture of 3-(4,6-dichloro-1,3,5-triazine-2,4-diyl)-8-oxa-3-azabicyclo[3.2.1]octane and 3,3?-(6-chloro-1,3,5-triazine-2,4-diyl)bis(8-oxa-3-azabicyclo[3.2.1]octane). Treatment of the mixture (400 mg) with 2-(difluoromethyl)-1H-benzo[d]imidazole (146 mg, 0.87 mmol) and K2CO3 (967 mg, 7 mmol) in DMF (2.5 mL) for 18 hours, followed by addition of 8-oxa-3-azabicyclo[3.2.1]octane hydrochloride (150 mg) gave, after 1 h, 3,3?-(6-(2-(difluoromethyl)-1H-benzo[d]imidazol-1-yl)-1,3,5-triazine-2,4-diyl)bis(8-oxa-3-azabicyclo[3.2.1]octane) after purification by HPLC. (M+H) 475.

The synthetic route of 705-09-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; WYETH LLC; VENKATESAN, Aranapakam Mudumbai; CHEN, Zecheng; DEHNHARDT, Christoph Martin; DOS SANTOS, Osvaldo; DELOS SANTOS, Efren Guillermo; ZASK, Arie; VERHEIJEN, Jeroen Cunera; KAPLAN, Joshua Aaron; RICHARD, David James; AYRAL-KALOUSTIAN, Semiramis; MANSOUR, Tarek Suhayl; GOPALSAMY, Ariamala; CURRAN, Kevin Joseph; SHI, Mengxiao; (113 pag.)US2017/119778; (2017); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-(Difluoromethyl)-1H-benzo[d]imidazole

Preparation Example 1 To a solution of 4,6-dichloro-2-(methylsulfanyl)pyrimidine (5 g) in N,N-dimethylformamide (50 mL) were added potassium carbonate (5.3 g) and 2-(difluoromethyl)-1H-benzimidazole (3.9 g), and the mixture was stirred at room temperature for 5 hours. To the reaction mixture was added water, followed by extraction with ethyl acetate. The organic layer was washed with saturated brine and dried over anhydrous magnesium sulfate. The solvent was evaporated under reduced pressure and then the residue was purified by silica gel column chromatography (hexane:ethyl acetate) to obtain 1-[6-chloro-2-(methylsulfanyl)pyrimidin-4-yl]-2-(difluoromethyl)-1H-benzimidazole (5.49 g) as a white powder.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Astellas Pharma Inc.; TAKAHASHI, Fumie; IMADA, Sunao; ASANO, Toru; KOZUKI, Yoshihiro; MAEDA, Junko; KATO, Koji; FUKAHORI, Hidehiko; SHIWAKU, Masahiko; US2013/150364; (2013); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Application of 705-09-9, These common heterocyclic compound, 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1 : To a solution of 3a in DMF was added NaH with ice-bath. The resulting mixture was stirred for 15min. at 0-5 0C and was added 1g. The reaction mixture was stirred at r.t. over night and evaporated to remove DMF. The residue was purified by column chromatography (PE:EA=1:2) to give 3b.

Statistics shows that 2-(Difluoromethyl)-1H-benzo[d]imidazole is playing an increasingly important role. we look forward to future research findings about 705-09-9.

Reference:
Patent; TYROGENEX, INC.; LIANG, Congxin; LI, Zhigang; WO2010/56320; (2010); A2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Some common heterocyclic compound, 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, molecular formula is C8H6F2N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2-(Difluoromethyl)-1H-benzo[d]imidazole

Example 55 1-(2-(2-(difluoromethyl)-1H-benzo[c]imidazol-1-yl)-6a,7,9,10-tetrahydro-[1,4]oxazino[3,4-h]pteridin-5(6H)-yl)ethanone To a 5 mL microwave vial equipped with a magnetic stir-bar were added 1-(2-chloro-6a,7,9,10-tetrahydro-[1,4]oxazino[3,4-h]pteridin-5(6H)-yl)ethanone (300 mg, 1.116 mmol), 2-(difluoromethyl)-1H-benzo[d]imidazole (179 mg, 1.063 mmol), tris(dibenzylideneacetone)dipalladium(0) (38.9 mg, 0.043 mmol) and cesium carbonate (520 mg, 1.595 mmol). The vial was evacuated and filled with nitrogen four times and then sealed. DMF (2.1 mL) was added to give an orange suspension, which was heated to 140 C. for 45 minutes. The reaction mixture was heated for an additional 30 minutes, was subsequently diluted with ACN (3 mL), and was passed through a syringe filter. The filtrate was directly purified by preparatory HPLC using a gradient of 40-60% CH3CN (with 0.035% TFA) in H2O (with 0.05% TFA). Lyophilization of the collected fractions gave a TFA salt of the title compound (135 mg, 31.7%). ESI-MS m/z [M+H]+ calc’d for C19H18F2N6O2, 401.15. found 401.3.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 705-09-9, its application will become more common.

Reference:
Patent; TAKEDA PHARMACEUTICAL COMPANY LIMITED; US2012/220575; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 705-09-9, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, This compound has unique chemical properties. The synthetic route is as follows.

Step 2: To a solution of Id (599mg, 3.57mmol) in DMF (20mL) was added NaH (143mg, 3.57mmol) with ice-bath. The resulting mixture was stirred for 15min. at 0-5 C and was added lc (1.43g, 3.57mmol). The reaction mixture was stirred at r.t. over night and evaporated to remove DMF. The residue was purified by column chromatography (PE:EA=1 :2) to give le (1.13g, 59.5% yield).

The chemical industry reduces the impact on the environment during synthesis 2-(Difluoromethyl)-1H-benzo[d]imidazole. I believe this compound will play a more active role in future production and life.

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 705-09-9 as follows. Application In Synthesis of 2-(Difluoromethyl)-1H-benzo[d]imidazole

A mixture of 2-difluoromethyl-lH-benzimidazole (2.22 g), 2,4-dichloro- 6-morpholinopyrimidine (2.81 g), potassium carbonate (6.63 g) and DMF (50 ml) was stirred under nitrogen and heated to 90C for 16 hours. The resultant mixture was cooled, filtered and the filtrate was evaporated. The resultant product was purified by column chromatography on silica using increasingly polar mixtures of ethyl acetate in methylene chloride as eluent. The solid so obtained was washed with a 1:1 mixture of isohexane and diethyl ether. There was thus obtained 4-chloro-2-(2-difluoromethylbenzimidazol- 1 -yl)-6-morpholinopyrimidine (3.17 g); NMR Spectrum: (DMSOd6) 3.75 (s, 8H), 7.09 (s, IH), 7.45-7.47 (m, IH), 7.50-7.54 (m, IH), 7.57-7.83 (t, IH), 7.87 (d, IH), 8.31 (d, IH); Mass Spectrum: M+H+ 366.

According to the analysis of related databases, 705-09-9, the application of this compound in the production field has become more and more popular.