Category: imidazoles-derivatives

Related Products of 3724-19-4. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 3-Pyridinepropionic acid, is researched, Molecular C8H9NO2, CAS is 3724-19-4, about Relationship between Chemical Structure and Supramolecular Effective Molarity for Formation of Intramolecular H-Bonds. Author is Sun, Hongmei; Hunter, Christopher A.; Navarro, Cristina; Turega, Simon.

Effective molarity (EM) is a key parameter that determines the efficiency of a range of supramol. phenomena from the folding of macromols. to multivalent ligand binding. Coordination complexes formed between zinc porphyrins equipped H-bond donor sites and pyridine ligands equipped with H-bond acceptor sites have allowed systematic quantification of EM values for the formation of intramol. H-bonds in 240 different systems. The results provide insights into the relationship of EM to supramol. architecture, H-bond strength, and solvent. Previous studies on ligands equipped with phosphonate diester and ether H-bond acceptors were inconclusive, but the experiments described here on ligands equipped with phosphine oxide, amide, and ester H-bond acceptors resolve these ambiguities. Chem. double-mutant cycles were used to dissect the thermodn. contributions of individual H-bond interactions to the overall stabilities of the complexes and hence determine the values of EM, which fall in the range 1-1000 mM. Solvent has little effect on EM, and the values measured in toluene and 1,1,2,2-tetrachloroethane are similar. For H-bond acceptors that have similar geometries but different H-bond strengths (amide and ester), the values of EM are very similar. For H-bond acceptors that have different geometries but similar H-bond strengths (amide and phosphonate diester), there is little correlation between the values of EM. These results imply that supramol. EMs are independent of solvent and intrinsic H-bond strength but depend on supramol. architecture and geometric complementarity.

Here is a brief introduction to this compound(3724-19-4)Related Products of 3724-19-4, if you want to know about other compounds related to this compound(3724-19-4), you can read my other articles.

Reference:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Heterocyclic compounds can be divided into two categories: alicyclic heterocycles and aromatic heterocycles. Compounds whose heterocycles in the molecular skeleton cannot reflect aromaticity are called alicyclic heterocyclic compounds. Compound: 3229-00-3, is researched, Molecular C5H8Br4, about The molecular structure, conformations and vibrational spectra of 2,2-di(chloromethyl)-1,3-dichloropropane and 2,2-di(bromomethyl)-1,3-dibromopropane, the main research direction is IR Raman dihalomethyldihalopropane; crystal structure dihalomethyldihalopropane; geometry dihalomethyldihalopropane; conformation dihalomethyldihalopropane; mol vibration dihalomethyldihalopropane.Quality Control of Pentaerythrityltetrabromide.

The IR and Raman spectra of (ClCH2)4C and (BrCH2)4C were recorded as melts and as solutes in various solvents. Crystal structures were determined In the crystalline state both compounds exist in the D2d conformer, whereas in the melt and in solution an addnl. conformer, probably of symmetry S4 was assigned supported by force constant calculations

Here is a brief introduction to this compound(3229-00-3)Quality Control of Pentaerythrityltetrabromide, if you want to know about other compounds related to this compound(3229-00-3), you can read my other articles.

Reference:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Nguyen, Thanh Binh; Mac, Dinh Hung; Retailleau, Pascal researched the compound: tert-Butyl 2-cyanoacetate( cas:1116-98-9 ).Safety of tert-Butyl 2-cyanoacetate.They published the article 《Base-Catalyzed Three-Component Reaction of α-Cyanoacetates with Chalcones and Elemental Sulfur: Access to 2-Aminothiophenes Unobtainable via the Gewald Reaction》 about this compound( cas:1116-98-9 ) in Journal of Organic Chemistry. Keywords: cyanoacetate chalcone sulfur DABCO catalyst three component reaction; aminothiophene preparation. We’ll tell you more about this compound (cas:1116-98-9).

Although the Gewald reaction was well-known for more than half a century as an excellent method providing bioactive 2-aminothiophenes from reactions of α-cyanoacetates and carbonyl compounds and elemental sulfur, its application to dibenzoylmethanes as the carbonyl substrates was, however, unknown and exptl. proven unsuccessful. Here a convenient approach to such a series of compounds by a DABCO-catalyzed, one-pot, two-step, three-component reaction of α-cyanoacetate with chalcones and elemental sulfur was proposed. This catalytic strategy was highlighted by its excellent atom/step efficiency and high degree of structural diversification by simply choosing the suitable starting chalcones, which were unarguably much more readily available than dibenzoylmethanes.

Here is a brief introduction to this compound(1116-98-9)Safety of tert-Butyl 2-cyanoacetate, if you want to know about other compounds related to this compound(1116-98-9), you can read my other articles.

Reference:
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 4857-06-1, name is 2-Chloro-1H-benzo[d]imidazole, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 4857-06-1

Sodium hydride (purity 55%)(516 mg, 12.0 mmol) was added to a N,N-dimethylformamide solution (8.0 ml) of 2-chloro-1H-benzimidazole (1.52 g, 10.0 mmol), at 0C, under nitrogen stream, and stirring was carried out for 20 minutes. Methyl iodide (0.750 ml, 12.0 mmol) was further added, and stirring was carried out under room temperature for 2 hours. Water was added to the reaction solution, and the resulting solid substance was collected by filtration to afford 2-chloro-1-methyl-1H-benzimidazole (1.51 g, yield 91%) as a white solid.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 4857-06-1.

Reference:
Patent; Daiichi Sankyo Company, Limited; EP2258697; (2010); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Application of 6160-65-2,Some common heterocyclic compound, 6160-65-2, name is 1,1′-Thiocarbonyldiimidazole, molecular formula is C7H6N4S, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Intermediate 19 (0.1 g, 0.36 mmol),1,1′-thiocarbonyldiimidazole (0.1 g, 0.58 mmol)And triethylamine (0.08 mL)Was dissolved in 30 mL of tetrahydrofuran,60 reflux 5h (TLC detection reaction is completed).After the reaction was completed, the solvent was evaporated under reduced pressure. To the residue was added 30 mL of dichloromethane and a saturated aqueous solution of sodium chloride (3×10 mL). The organic layer was dried over anhydrous sodium sulfate and filtered. (4-cyclopropyl-1-naphthyl) -2-mercapto-1H-imidazo [4,5-b] pyridine (22) as a yellowish solid. Yield 70.9%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1,1′-Thiocarbonyldiimidazole, its application will become more common.

Reference:
Patent; Shan Dong University; Lu, Xinyong; Meng, Qing; Zhan, Peng; Fang, Zengjun; Zhao, Tong; Sun, Zhuosen; Sun, Xiukun; (36 pag.)CN106083847; (2016); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Some common heterocyclic compound, 10111-08-7, name is Imidazole-2-carboxaldehyde, molecular formula is C4H4N2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of Imidazole-2-carboxaldehyde

Compound 234.1. lH-Imidazole-2-carbonitrile. Into a 1-L round-bottom flask, was placed a solution of lH-imidazole-2-carbaldehyde (5 g, 52.04 mmol) in NN- dimethylformamide (200 mL). Triethylamine (10.8 mL, 77.97 mmol), hydroxylamine hydrochloride (3.95 g, 56.84 mmol, 1.10 equiv), 1-propanephosphonic anhydride solution and 2,4,6-tripropyl-l,3,5,2,4,6-trioxatriphosphorinane-2,4,6-trioxide solution (T3P) (36.4 g, 114.40 mmol) were added to the reaction. The reaction mixture was stirred for 4h at 100 C, cooled and then quenched with 500 mL of water/ice. The aqueous phase was extracted with 3 x 1L of ethyl acetate, then the combined organic layers was washed with 2 x 1L of brine, dried over anhydrous sodium sulfate and concentrated under reduced pressure. The residue was purified by silica gel chromatography with ethyl acetate/petroleum ether (1/2) as eluent to furnish 2 g (41%) of the title compound as an off-white solid.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 10111-08-7, its application will become more common.

Reference:
Patent; 3-V BIOSCIENCES, INC.; HEUER, Timothy Sean; OSLOB, Johan D.; MCDOWELL, Robert S.; JOHNSON, Russell; YANG, Hanbiao; EVANCHIK, Marc; ZAHARIA, Cristiana A.; CAI, Haiying; HU, Lily W.; WO2015/95767; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

1977-72-6, A common compound: 1977-72-6, name is 5-Fluoro-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below.

Intermediate VI-10 5-fluorobenzimidazole (0.28 g, 2.04 mmol) was added to a 150 mL round bottom flask.After stirring potassium carbonate as a base (0.30 g, 2.20 mmol) and acetonitrile as a solvent at 50 C for 40 minutes,After cooling to room temperature, intermediate V (0.43 g, 1.70 mmol) was added and the mixture was warmed to 75 C and the mixture was traced to the end of the reaction.After further concentration, extraction, column chromatography separation, drying and the like, the intermediate X-10 (0.49 g) is obtained, the yield is 73.4%;White solid,

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Fluoro-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Southwest University; Zhou Chenghe; Man Nabaonei·lamohan·laao·yadafu; Wang Juan; (39 pag.)CN110305064; (2019); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

These common heterocyclic compound, 17334-08-6, name is (1-Methyl-1H-imidazol-2-yl)methanol, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of (1-Methyl-1H-imidazol-2-yl)methanol

Synthesis of 2-(Chloromethyl)-1-methyl-1H-imidazole Hydrochloride (BB7) To a solution of (BB6) (35.5 g, 316.96 mmol) in DCM (1500 mL) was added SOCl2 (330 mL, 4436 mmol) at 0 C. The reaction was warmed to ambient temperature and stirred for 5 h. The reaction mixture was concentrated, the residue was washed with DCM (2*500 mL), followed by Et2O (2*200 mL) to obtain (BB7) (50 g, 95%) as an off-white solid. Rf: 0.4 (EtOAc). 1H NMR (400 MHz, DMSO-d6): delta 7.76 (1H, app d), 7.70 (1H, app d), 5.17 (2H, s), 3.87 (3H, s); ink 131 (MH)+.

The synthetic route of (1-Methyl-1H-imidazol-2-yl)methanol has been constantly updated, and we look forward to future research findings.

Reference:
Patent; THE UNIVERSITY OF MANCHESTER; ST GEORGE’S HOSPITAL MEDICAL SCHOOL; US2012/322722; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 2963-77-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 2963-77-1 name is 4-(1H-Benzo[d]imidazol-2-yl)aniline, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a solution of stannous chloride 1.6 g, (8.4 mmol) in 30 mL water was added 1.75g (8.4 mmol) of PBA in 30mL ethanol. The reaction mixture was stirred at room temperature for 30 min and then a solution of BPE (2 g, 8.4 mmol in 30 mL water) was added to mixture and heated at 100C for 14 h. The progress of reaction was controlled with TLC (DMF/water: 50/50). At the end of reaction, the reaction mixture was cooled, diluted with ethanol (40 mL), filtered and washed with ethanol and then with DMF to obtain a red precipitate. Yield: 85%, m.p. : 230C; m.f.: C28H26N6SnCl2. UV-vis (DMSO); max (nm): 280, 310, 430. IR (KBr, max, cm-1): 3443 (m), 3338 (m), 3224(m), 1601 (s), 1567 (s), 1497 (s), 1411 (m), 1320 (s), 1236 (s), 1168 (s), 1110 (s), 1069 (s), 849 (s), 744 (m), 607 (m) 498 (m), 434 (m).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 4-(1H-Benzo[d]imidazol-2-yl)aniline, and friends who are interested can also refer to it.

Reference:
Article; Aroua, Lotfi M.; Asian Journal of Chemistry; vol. 32; 6; (2020); p. 1266 – 1272;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 10364-94-0, These common heterocyclic compound, 10364-94-0, name is (1H-Imidazol-1-yl)(phenyl)methanone, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: In a round bottomed flask 0.01 mol (1.36 g) phenyl acetic acid and 0.012 mol (1.94 g) of CDI were added. The reaction mixture was mixed and grinded with a spatula. CO2 gas starts releasing with increase in temperature and solid reaction mixture was turned to pale yellow liquid within 5 min. 0.001 mol (0.1 g) Imidazole. hydrochloride, 0.01 mol (0.87 g) of morpholine, and 1 mL of water were added to it. The reaction mixture was kept at room temperature for another 10 min. Dilute hydrochloride solution was added to it and the aqueous layer was washed with ethyl acetate. The organic layer was dried over anhydrous Na2SO4 and concentrated to give pure product.

Statistics shows that (1H-Imidazol-1-yl)(phenyl)methanone is playing an increasingly important role. we look forward to future research findings about 10364-94-0.

Reference:
Article; Verma, Sanjeev K.; Ghorpade, Ramarao; Pratap, Ajay; Kaushik; Tetrahedron Letters; vol. 53; 19; (2012); p. 2373 – 2376;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem