Category: imidazoles-derivatives

Adding a certain compound to certain chemical reactions, such as: 57090-88-7, name is 1H-Imidazole-4-carbonitrile, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 57090-88-7, name: 1H-Imidazole-4-carbonitrile

Example 1 Production of 1-(1H-imidazol-4-yl)-2-methyl-1-propanone A solution of 4-cyanoimidazole (42.7 g, 0.458 mol) in THF (500 ml) was added dropwise over 30 min to a solution (1.4 L, 1.47 mol, 3.2 equivalents) of 1.1 M isopropyl magnesium bromide in THF at 0 to 10°C under a nitrogen atmosphere. The mixture was stirred at 15 to 25°C for 3 h. Water (430 ml) and 10percent aqueous sulfuric acid solution (860 ml) were successively added dropwise, and the mixture was stirred at 30 min. A 30percent aqueous sodium hydroxide solution was added dropwise to adjust the pH to 8. After partitioning, the aqueous layer was extracted with ethyl acetate (300 ml * 2). The organic layer was combined, and the mixture was washed successively with saturated aqueous sodium hydrogencarbonate and saturated brine, and concentrated under reduced pressure. The concentration residue was broken up with isopropyl ether (300 ml). The crystals were collected by filtration and washed with isopropyl ether. The crystals were dried in vacuo (40°C) to give 1-(1H-imidazol-4-yl)-2-methyl-1-propanone (51.9 g, yield 82percent). 1H-NMR (CDCl3): delta1.25(6H, d, J=6.9Hz), 3.36(1H, quint, J=6.9Hz), 7.81(1H, s), 7.87(1H, s)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole-4-carbonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Takeda Chemical Industries, Ltd.; EP1193258; (2002); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 6160-65-2, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 6160-65-2, name is 1,1′-Thiocarbonyldiimidazole, This compound has unique chemical properties. The synthetic route is as follows.

After performing this reaction several times, all product fractions were pooled and the resulting residue of the dihydroxyl derivative (124 mg, 269 mumol, 1 eq.) was dissolved under argon in tetrahydrofurane (80 mL) in a 250 mL flame-dried flask. To this solution was added thiocarbonyl diimidazole (480 mg, 2.69 mmol, 10 eq.) and 4-(dimethylamino)pyridine (329 mg, 2.69 mmol, 10 eq.). The resulting reaction mixture was heated to 80C and stirred at this temperature overnight. After cooling to room temperature, a small portion of silica gel was added and the solvent was removed under reduced pressure. The adsorbed crude product was purified by flash column chromatography (50% ethyl acetate in cyclohexane) to yield 119 mg (237 mumol, 88%) of (VII) as a colorless solid.

The chemical industry reduces the impact on the environment during synthesis 1,1′-Thiocarbonyldiimidazole. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Max-Planck-Gesellschaft zur Foerderung der Wissenschaften e.V.; EP2210881; (2010); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 616-47-7, These common heterocyclic compound, 616-47-7, name is 1-Methyl-1H-imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1-methylimidazole (1 mmol, 82.1 mg),Carbon tetrabromide (1.1 mmol, 364.8 mg) was placed in a 10 mL round bottom flask.Added 5 mL of N,N-dimethylformamide and sodium tert-butoxide (4.0 mmol, 384.4 mg).Stir at room temperature for 3 hours,TLC monitored the endpoint of the reaction. The mixture is poured into water and extracted with dichloromethane. The organic phase is collected, dried, and the dichloromethane is removed by rotary evaporation.Crude product. The crude product was subjected to silica gel column chromatography with petroleum ether and ethyl acetate as eluents (volume ratio = 10:1) to obtain 2-Bromo-1-methylimidazole (red-brown liquid, 101.4 mg, yield 63%).

The synthetic route of 616-47-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Liaoning University; Liang Fushun; Liu Xia; Han Zhengbo; Su Zhongmin; (10 pag.)CN107501023; (2017); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 71759-87-0, name is 4-Iodo-1-methyl-1H-imidazole, This compound has unique chemical properties. The synthetic route is as follows., COA of Formula: C4H5IN2

To a solution of chloride 2 (scheme 1) (2.45 g, 14.4 mmol) in THF (48 mL) at -78C was slowly added w-BuLi (2.5M in hexane, 7.2 mL, 18.0 mmol). The reaction mixturewas stirred for one hour [at -78C] followed by slow addition of ZnCl (0.5M in THF, 36mL, 18.0 mmol). In a few minutes the reaction mixture was allowed to warm to roomtemperature and stirred for one hour.[0422] A solution of 4-iodo-l -methyl- 1/f-imidazole (1.50 g, 7.2 mmol) Tet. Lett. 2004.45. 5529] in THF (5 mL) and the tetrakis(triphenylphosphine) palladium (0) (0.83 g, 0.72mmol) were added to the reaction mixture which was heated to reflux for 1 hour, cooled toroom temperature, diluted with aqueous ammonium hydroxide and, finally neutralized witha IN HC1 solution. The acidic solution was extracted with DCM, the extract was washedwith water and brine, dried over anhydrous magnesium sulfate, filtered and evaporatedunder reduced pressure. The residue was purified by flash chromatography (eluents DCM,then DCM-MeOH, 97:3) to afford title compound 175 (1.45 g, 81% yield) as a yellow solid.LRMS (M+l) 263.9 (100%), 265.9 (33%).

According to the analysis of related databases, 71759-87-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; METHYLGENE, INC.; WO2006/10264; (2006); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5465-29-2, name is 2-Propylbenzimidazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-Propylbenzimidazole

The 1H-benzo[d]imidazole 5a(2.50 mmol) was dissolved in 10 ml of abs. DMF. Sodium hydride(60% dispersion in mineral oil) (0.2 g, 5 mmol) was added withcooling. After the gas formation stopped, 40-bromomethyl-[1,10-biphenyl]-2-carbonitrile dissolved in 2 ml of abs. DMF was addeddropwise and the solutionwas stirred for 1 h under cooling in an icebath and further 2 h at RT. Water was added and after the solutionwas acidified with HCl, the product was extracted three times withmethylene chloride. The combined organic layers were dried overNa2SO4 and evaporated to dryness in vacuo. The crude product waspurified by column chromatography on silica gel with methylenechloride/methanol (95:5) and recrystallized from diethyl ether/methanol.

The synthetic route of 5465-29-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Obermoser, Victoria; Urban, Margarethe E.; Murgueitio, Manuela S.; Wolber, Gerhard; Kintscher, Ulrich; Gust, Ronald; European Journal of Medicinal Chemistry; vol. 124; (2016); p. 138 – 152;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

These common heterocyclic compound, 5098-11-3, name is 5-Amino-1H-imidazole-4-carbonitrile, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Formula: C4H4N4

Example 1 : General procedure for the preparation of cyano-imidazo[1 ,5- a]pyrimidines of general formula (I) following Scheme 1N-[3-(8-cyano-imidazo[1 ,5-a]pyrimidin-4-yl)-phenyl]-N-ethyl- ethanesulfonamide0.035 g (0.32 mmol) of delta-amino-I H-imidazole^-carbonitrile and 0.1 g (0.32 mmol) of N-[3-[3-(dimethylamino)-1 -oxo-2-propenyl]phenyl]-N-ethyl- ethanesulfonamide were dissolved in 10 ml of glacial acetic acid. After refluxing for 4 hours, the solvent was removed by reduced pressure distillation. To the resultant residue 10 ml of dichloromethane and 10 ml of a saturated solution of sodium bicarbonate were added. The two layers were separated, and the aqueous layer was washed with 10 ml of dichloromethane. The organic layers were washed with 10 ml of water and dried over magnesium sulfate. The dichloromethane layer was evaporated to dryness to yield an oil which, in the presence of ethyl acetate gave a yellow solid, 58 mg (yield 51%) of N-[3-(8-cyano-imidazo[1 ,5-a]pyrimidin-4-yl)-phenyl]-N-ethyl- ethanesulfonamide1H NMR (400 MHz, CDCI3): delta 1.2 (3H, t, J= 7.2 Hz), 1.41 (3H, t, J= 7.6 Hz), 3.08 (2H, q, J= 7.6 Hz), 3.84 (2H, q, J= 7.6 Hz), 6.85 (1 H, d, J= 4 Hz), 7.58- 7.71 (3H, m), 7.76-7.77 (1 H, m), 8.25 (1 H, s), 8.56 (1 H, d, J= 4 Hz). MS (ES) m/z = 356 (MH+) HPLC = 94.2%

The synthetic route of 5-Amino-1H-imidazole-4-carbonitrile has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FERRER INTERNACIONAL, S. A.; WO2006/84835; (2006); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 288-32-4, name is 1H-Imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-32-4, Quality Control of 1H-Imidazole

To a stirred solution of imidazole (6.80 g, 100 mmol) in anhydrous dichloromethane (500 mL) was added BrCN (3.70 g, 33 mmol) and stirring was continued at reflux for 30 min. The mixture was cooled to room temperature and concentrated to afford di(imidazole-1-yl)methanimine (4.05 g, 72 %) as a pale yellow solid which was used without further purification.H NMR (DMSO-d6): 10.21 (br s, 1 H, NH), 8.09 (s, 2 H, 2 * CH), 7.57 (s, 2 H, 2 * CH), 7.12 (s, 2 H, 2 * CH).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; SHIRE, LLC; FRANKLIN, Richard; TYSON, Robert G; GOLDING, Bernard T; WO2012/85586; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 57090-88-7, name is 1H-Imidazole-4-carbonitrile belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. 57090-88-7

General procedure: A solution of 4-cyano-1H-imidazole (1000 mg, 10.74 mmol), 4-iodo -2-(trifluoromethyl)pyridine (3800 mg,14 mmol), (1R,2R)-N1,N2-dimethyl cyclohexane -1,2-diamine (150 mg, 1.07 mmol), CuI (200 mg, 1.07 mmol) and Cs2CO3 (7000 mg, 21.5 mmol) in 20 mL anhydrous DMF was stirred at 100 oC for 2 hours. The reaction mixture was cooled to room temperature and poured into 200 mL water. The mixture was extracted with ethyl acetate (80 mL*3). The organic layer were combined, washed by brine, dried by Na2SO4 and evaporated. The crude product was purified by silica flash column to afford compound 2 as white solid(1.5 g, 59percent yield).

The synthetic route of 57090-88-7 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Zheng, Qiangang; Chen, Ziqi; Wan, Huixin; Tang, Shuai; Ye, Yan; Xu, Yuan; Jiang, Lei; Ding, Jian; Geng, Meiyu; Huang, Min; Huang, Ying; Bioorganic and Medicinal Chemistry Letters; vol. 28; 23-24; (2018); p. 3808 – 3812;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 39070-14-9, In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 39070-14-9 as follows.

A mixture of 2-(1-methyl-5-nitro-1H-imidazol-2-yl)-ethanol (1.32 mmol) and 1-fluoro- 3 -nitrobenzene (1.67 mmol) and K2C03(465 mg, 3.36 mmol) in DMF (5 mL) was stirred 2 hours at ambient temperature followed by heating. The reaction was worked-up by extraction. The residue was purified by prep-HPLC with the following condition: column: XBridge preparative CI 8 OBD column 19x 150 mm, 5 um; mobile phase A: water (10 mmol/L NH4HCO3), mobile phase B: ACN; flow rate: 20 mL/min; gradient elution. The product-containing fractions were collected and then lyophilized to give l-methyl-5-nitro-2-(3-nitro-phenoxymethyl)-lH- imidazole. LC-MS: (ES, m/z) 279.07 (M+H)+; analysis: C, 47.53; H, 3.69; N, 20.24; O, 28.85.

According to the analysis of related databases, 39070-14-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; GENCIA CORPORATION; KHAN, Shaharyar; (80 pag.)WO2018/129258; (2018); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 705-09-9, name is 2-(Difluoromethyl)-1H-benzo[d]imidazole, A new synthetic method of this compound is introduced below., Application In Synthesis of 2-(Difluoromethyl)-1H-benzo[d]imidazole

Preparation Example 1 To a solution of 4,6-dichloro-2-(methylsulfanyl)pyrimidine (5 g) in N,N-dimethylformamide (50 mL) were added potassium carbonate (5.3 g) and 2-(difluoromethyl)-1H-benzimidazole (3.9 g), and the mixture was stirred at room temperature for 5 hours. To the reaction mixture was added water, followed by extraction with ethyl acetate. The organic layer was washed with saturated brine and dried over anhydrous magnesium sulfate. The solvent was evaporated under reduced pressure and then the residue was purified by silica gel column chromatography (hexane:ethyl acetate) to obtain 1-[6-chloro-2-(methylsulfanyl)pyrimidin-4-yl]-2-(difluoromethyl)-1H-benzimidazole (5.49 g) as a white powder.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Astellas Pharma Inc.; TAKAHASHI, Fumie; IMADA, Sunao; ASANO, Toru; KOZUKI, Yoshihiro; MAEDA, Junko; KATO, Koji; FUKAHORI, Hidehiko; SHIWAKU, Masahiko; US2013/150364; (2013); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem