Category: imidazoles-derivatives

These common heterocyclic compound, 641571-11-1, name is 3-(4-Methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)aniline, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. category: imidazoles-derivatives

A mixture of 44 (2.3 g, 9.5 mmol) and NaOH (759 mg, 19 mmol) in MeOH/H20 (20/5 mL) was stirred at room temperature overnight. The reaction mixture was concentrated. The residue dissolved in water, acidified to pH 3 with aqueous HCI and extracted with EtOAc twice. The combined organic layers were washed with brine, dried over Na2504 and evaporated under reduced pressure to give 45 (1.9 g, 88%) as a whitesolid. To a solution of this material (48 mg, 0.21 mmol) in NMP (1 mL) was added SOd2 (38 mg, 0.32 mmol). The reaction was heated at 60 C for 1 hour before 3 (50 mg, 0.21 mmol) and Et3N (85 mg, 0.84 mmol) was added. The resulting mixture was stirred at 60 C for 3 hours. The reaction was directly purified by reverse prep-HPLC and then silica gel prep-TLC to give 4-methyl-N-(3-(4-methyl-1 H-imidazol-1 -yl)-5-(trifluoromethyl)phenyl)-3-phenoxybenzamide (27 mg, 29%) as a slightly yellow solid.

The synthetic route of 3-(4-Methyl-1H-imidazol-1-yl)-5-(trifluoromethyl)aniline has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CARDIO THERAPEUTICS PTY LTD; TREUTLEIN, Herbert; ZENG, Jun; DIXON, Ian; JAMES, Ian; PALMER, James T; (169 pag.)WO2018/165718; (2018); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 32673-41-9,Some common heterocyclic compound, 32673-41-9, name is 4-Imidazolemethanol hydrochloride, molecular formula is C4H7ClN2O, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To 0.5 g (3.7 millimoles) of 4-hydroxymethylimidazole hydrochloride was added 3 ml of thionyl chloride and reaction was carried out at 50 C. for 2 hours. The excess of thionyl chloride was removed by distillation under reduced pressure. The residue was dissolved in 10 ml of DMF and a solution of 1.1 g (6.3 millimoles) of 2,2,4-trimethyl-1,2,3,4-tetrahydroquinoline in 5 ml of DMF was added to the above solution at 100 C. Reaction was carried out for 1 hour. DMF was removed from the reaction mixture by distillation under reduced pressure. An aqueous solution of sodium hydrogen-carbonate was added to the residue and the mixture was extracted with dichloromethane. The organic layer was dried with anhydrous sodium sulfate and concentrated under reduced pressure to obtain a light-green oil. The oil was purified by the silica gel column chromatography (developing solvent; ethyl acetate) to obtain 0.35 g (the yield was 39%) of 4-[1-(2,2,4-trimethyl-1,2,3,4-tetrahydroquinolyl)methyl]imidazole in the form of a colorless crystal.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 4-Imidazolemethanol hydrochloride, its application will become more common.

Reference:
Patent; Mitsui Petrochemical Industries, Ltd.; US4962200; (1990); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 7098-07-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7098-07-9, name is 1-Ethyl-1H-imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

As a general procedure for preparing Bronsted acidic ILs, the synthesis of 1-(4-butylsulfonic)-3-ethylimidazolium hydrogensulfate ([EImC4SO3H][HSO4]) is given as an example. To 1-ethylimidazole (10 g, 0.104 mol) in 50 mL of toluene, 1,4-butanesultone (14.2 g, 0.104 mol) dissolved in 50 mL of toluene was added dropwise under a dry nitrogen gas atmosphere. The resulting solution was refluxed with stirring at 60 °C for 24 h.After removing toluene, the product was washed thrice with 100 mL of diethyl ether to yield 1-(4-butylsulfonate)-3-ethylimidazol([EImC4SO3]) as a white powder. After dissolving [EImC4SO3] (20 g, 8.6102 mol) in 50 mL of methanol, sulfuric acid (0.84 g, 8.6102 mol) was added dropwise in an ice bath. The resulting solution was refluxed with stirring at 60 °C for 24 h. Following the reaction, methanol was removed by evaporation and then under reduced pressure, giving1-(4-butylsulfonic)-3-ethylimidazolium hydrogen sulfate ([EImC4SO3H][HSO4]) as a viscous liquid.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Ethyl-1H-imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Kakibe, Takeshi; Nakamura, Satoshi; Amakuni, Kiyokazu; Kishi, Hajime; Australian Journal of Chemistry; vol. 72; 2; (2019); p. 101 – 105;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 36947-68-9, These common heterocyclic compound, 36947-68-9, name is 2-Isopropyl-1H-imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A mixture of ethyl 4-fluoro-3-nitrobenzoate 4.26 g, 2-isopropylimidazole 2.20 g, N,N-diisopropylethylamine 5.2 mL and acetonitrile 40 mL was heated under reflux for 24 hours. After distilling the solvent off, water was added to the residue and extracted with ethyl acetate. The organic layer was washed with brine, dried over magnesium sulfate and removed of the solvent by distillation, to provide 4.95 g of the title compound. 1H-NMR(CDCl3, delta): 1.23(6H, d, J=6.9Hz), 1.44(3H, t, J=7.1Hz), 2.6-2.8(1H, m), 4.47(2H, q, J=7.2Hz), 6.85(1H, d, J=1.5Hz), 7.13(1H, d, J=1.5Hz), 7.53(1H, d, J=8.5Hz), 8.39(1H, dd, J=1.7, 8.3Hz), 8.67(1H, d, J=1.9Hz). MS(m/z): 303(M+).

Statistics shows that 2-Isopropyl-1H-imidazole is playing an increasingly important role. we look forward to future research findings about 36947-68-9.

Reference:
Patent; ASKA Pharmaceutical Co., Ltd.; EP2103613; (2009); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 71759-89-2,Some common heterocyclic compound, 71759-89-2, name is 5-Iodo-1H-imidazole, molecular formula is C3H3IN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Method A: In a20 mL microwave Biotage tube, a mixture of 4-iodo-1H-imidazole(1a) (0.194 g, 1.0 mmol), a boronic acid 2(2.0 mmol), CsF (0.456 g,3.0 mmol), PdCl2(dppf)(0.041 g, 0.05 mmol) and BnEt3NCl(0.011 g, 0.05 mmol) in toluene(7 mL) and water (7 mL)was purged with argon andheated under microwaveirradiation. When the reaction was complete, the mixture was cooled toroom temperature and concentrated under reduced pressure. The residue waspurified by flash chromatography on silica gel to provide compounds 3a-3i and 3k-3o in yields ranging from 40 to 91%. Time and temperaturereactions were collected in Table 1.

The synthetic route of 71759-89-2 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Vichier-Guerre, Sophie; Dugue, Laurence; Pochet, Sylvie; Tetrahedron Letters; vol. 55; 46; (2014); p. 6347 – 6350;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 50995-95-4, name is 2-Propylimidazole, A new synthetic method of this compound is introduced below., Recommanded Product: 2-Propylimidazole

General procedure: A solution of imidazole 4-13, benzimidazole 40, 41, pyridoimidazole 42 or benzotriazole 43 (23 mmol) in dry DMF (15 mL) and K2CO3 (11.5 mmol) was stirred for 10 min at 0-5 C, under nitrogen atmosphere. After this time, appropriate 1-aryl-2-bromo-ethanone 18-21 (23 mmol) was added and the mixture was stirred for 1.5 h then poured into ice water. The resulting crude material was extracted with dichloromethane (3 × 50 mL). The combined organic layers were dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure; the obtained residue were purified by means of flash chromatography performed using silica gel 60 (230-400 mesh) and a mixture of ethyl acetate/methanol 8:2 v/v or dichloromethane/methanol 9.5/0.5 v/v (only for purification of 25 and 26, 49 and 51, 50 and 52, respectively) as eluent.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Salerno, Loredana; Modica, Maria N.; Romeo, Giuseppe; Pittala, Valeria; Siracusa, Maria A.; Amato, Maria E.; Acquaviva, Rosaria; Di Giacomo, Claudia; Sorrenti, Valeria; European Journal of Medicinal Chemistry; vol. 49; (2012); p. 118 – 126;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 360-97-4, name is 4-Amino-1H-imidazole-5-carboxamide, A new synthetic method of this compound is introduced below., Quality Control of 4-Amino-1H-imidazole-5-carboxamide

To a solution of 5-amino-lH-imidazole-4-carboxylic acid amide (lOg, 79.36 mmol) and DMAP (291 mg, 2.38 mmol) in anhydrous pyridine (200 mL) was slowly added 2,2- dimethyl-propionyl chloride (10.74 mL, 87.30 mmol) and the reaction mixture was stirred at 80 C for 8 h. The solvent was evaporated under reduced pressure and the residue was diluted with cold water (50 mL). The precipitate was filtered, washed with water (30 mL) and dried to get yield the title compound (9 g, 54 %) as ash-color solid. MS(m/e): 211.4 (M+H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BENDELS, Stefanie; GRETHER, Uwe; KIMBARA, Atsushi; NETTEKOVEN, Matthias; ROEVER, Stephan; ROGERS-EVANS, Mark; SCHULZ-GASCH, Tanja; WO2014/177490; (2014); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 1003-21-0,Some common heterocyclic compound, 1003-21-0, name is 5-Bromo-1-methyl-1H-imidazole, molecular formula is C4H5BrN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Ethyl magnesium bromide (3.0 M in diethyl ether, 21.5 mL, 64.4 mmol) was added via syringe over a few minutes to a clear colorless solution of 5-bromo-1-methyl-1H-imidazole (10.4 g, 64.4 mmol) in THF (100 mL) under a nitrogen atmosphere in an ice bath. A white precipitate formed during the addition. The mixture was removed from the ice bath and was stirred for 20 minutes, then was again cooled in an ice bath before addition of 4-chloro-N-methoxy-N-methylbenzamide (10.7 g, 53.6 mmol, Intermediate 22: step a). The resulting white suspension was stirred overnight at room temperature. The reaction was quenched by addition of saturated aqueous NH4Cl and diluted with water. The mixture was partially concentrated to remove THF and was diluted with DCM. The mixture was acidified to pH 1 with 1 N aqueous HCl, then neutralized with saturated aqueous NaHCO3. The phases were separated and the aqueous phase was further extracted with DCM. The organic extracts were washed with water, then were dried (Na2SO4), filtered, and concentrated, affording a white solid. The crude product was triturated with a mixture of EtOAc:heptanes (1:1, 150 mL). The precipitated solid was collected by vacuum filtration, washing with heptanes, to afford the title compound.

The synthetic route of 1003-21-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 28890-99-5, name is 5H-Benzo[d]benzo[4,5]imidazo[1,2-a]imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 28890-99-5, Formula: C13H9N3

Example 4 a) 7.78 g (25 mmol) 1-bromo-3-iodo-benzene, 16.3 g (50.0 mmol) caesium carbonate, 1.24 g (6.50 mmol) copper(I) iodide and 1.50 g (13.0 mmol) L-proline are added to 5.18 g (25.0 mmol) mmol) 5H-benzimidazo[1,2-a]benzimidazole in 100 ml dimethylsulfoxide (DMSO) under nitrogen. The reaction mixture is stirred for 18 h at 100 C. The reaction mixture is poured into water. The organic phase is extracted with dichloromethane. The organic phase is dried with magnesium sulfate. The solvent is distilled of. Column chromatography on silica gel with toluene gives the product. Yield 8.35 g (92%).1H NMR (400 MHz, CDCl3): delta 8.25 (s, 1H), 7.90-8.05 (m, 3H), 7.95-8.05 (m, 3H), 7.71 (d, J=7.9 Hz, 1H), 7.65 (d, J=7.9 Hz, 1H). 7.50-7.65 (m, 2H), 7.26-7.45 (m, 4H)

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5H-Benzo[d]benzo[4,5]imidazo[1,2-a]imidazole, and friends who are interested can also refer to it.

Reference:
Patent; BASF SE; US2012/241681; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 60-56-0, name is 1-Methyl-1H-imidazole-2(3H)-thione, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 60-56-0

Example 257 7-{1-[(1-Methyl-1H-imidazol-2-yl)thio]ethyl}-2-(1,3-thiazol-2-yl)-1H-indole A solution of 1-[2-(1,3-thiazol-2-yl)-1H-indol-7-yl]ethanol (0.089 g), 1-methyl-1H-imidazole-2-thiol (0.046 g) and tributylphosphine (0.458 g) in tetrahydrofuran (7 mL) was stirred, 1,1′-(azodicarbonyl)dipiperidine (0.584 g) was added, and the mixture was stirred at room temperature for 1 hr. Water was added to the reaction mixture, and the mixture was extracted with ethyl acetate. The extract was washed successively with water and saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate_hexane=30:70 – 70:30) to give the title compound (0.110 g, yield 89%) as colorless crystals. MS m/z 341 (M+H+).

According to the analysis of related databases, 60-56-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Takeda Pharmaceutical Company Limited; EP1873144; (2008); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem