Category: imidazoles-derivatives

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 615-16-7, name is 2-Hydroxybenzimidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. HPLC of Formula: C7H6N2O

sodium hydride (55% w/w dispersion in oil, 2.8 g) was added portionwise to a solution of 2,3-dihydrobenzimidazol-2-one (4.3 g) in DMF (100 ml) which had been cooled in an ice-water bath. The mixture was stirred at ambient temperature for 1.5 hours, during which period a further portion of DMF (50 ml) was added to aid the stirring of the reaction mixture. methyl iodide (5 ml) was added and the mixture was stirred at ambient temperature for 16 hours. The mixture was evaporated and the residue was partitioned between ethyl acetate and water. The organic phase was washed with water and with brine, dried (MgSO4 and evaporated. The residue was purified by column chromatography using a 2:1 v/v mixture of toluene and ethyl acetate as eluent. There was thus obtained 1,3-dimethyl-2,3-dihydrobenzimidazol-2-one (3.14 g, 60%), m.p. 104-106C.

The synthetic route of 615-16-7 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ZENECA LIMITED; ZENECA Pharma S.A.; EP462831; (1996); B1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 570-22-9, name is 1H-Imidazole-4,5-dicarboxylic acid, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 570-22-9, Product Details of 570-22-9

In H2O (12ml) solvent was added Cu(SO4) · 5H 2O (0.212g, 0.85mmol), 2,2′-bipyridine (0.086g, 0.5mmol), 4,5-imidazole acid (0.078g, 0.5mmol), NaOH (0.020g, 0.5mmol), placed stirred for 30 minutes on a magnetic stirrer, and the reaction was placed in 25ml teflon-lined autoclave, sealed in a high temperature oven, constant-temperature 160 C for five days to 5 C / h rate to room temperature, the reaction vessel blue precipitate bulk crystal, in 60% yield (based on copper).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole-4,5-dicarboxylic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Capital Normal University; Lu, Xiaoming; Cheng, Yifeng; (14 pag.)CN103965224; (2016); B;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 7152-24-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 7152-24-1, name is 2-(Methylthio)benzimidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

S1 A stirred solution of 4,5-dichloropyrimidine (206 mg, 1.38 mmol) and 2-methylthiobenzimidazole (227 mg, 1.38 mmol) in dry DMF (1.5 mL) was treated with potassium te/f-butoxide (155 mg, 1.38 mmol) then heated to 50C for 8 hours. The solution was cooled, quenched with saturated aq. ammonium chloride solution (to pH 6-7), diluted with water (30 mL) and extracted with EtOAc (40 mL). The organics were washed with water (2 x 30 mL) and brine, dried (MgS04), triturated with DCM and the liquors were chromatographed eluting with 20-50% EtOAc / PE to give 1-(5-chloropyrimidin-4-yl)-2- (methylthio)-1 /-/-benzo[d]imidazole S1 (193 mg, 50%) as a colourless gum. 1H NMR (500 MHz, CDCb) delta 9.20 (s, 1H), 9.01 (s, 1H), 7.78-7.71 (m, 1H), 7.30 (ddd, J = 8.1, 7.4, 1.1Hz, 1H), 7.22 (ddd, J = 8.4, 7.4, 1.1Hz, 1H), 7.08-7.01 (m, 1H), 2.79 (s, 3H); LCMS (method B): 2.58 min (277.0, MH+).

The synthetic route of 2-(Methylthio)benzimidazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; REDAG CROP PROTECTION LTD; URCH, Christopher, John; BUTLIN, Roger, John; CHRISTOU, Stephania; BOOTH, Rebecca, Kathryn; (111 pag.)WO2018/130838; (2018); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 4856-97-7, name is (1H-Benzoimidazol-2-yl)methanol, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 4856-97-7, SDS of cas: 4856-97-7

To a solution of 1 (5.0 g, 34 mmol) in DCM was added MnO2(1.3 g, 6.8 mmol). The resulting solution was stirred at 40 C for 2 h and monitored by TLC. Aftercomplete conversion of starting material, reaction mixture was cooled to room temperature, filteredand concentrated in vacuo to obtain 2 as white solid in 85.0% yield. LC-MS m/z: 147.1 [M + H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (1H-Benzoimidazol-2-yl)methanol, and friends who are interested can also refer to it.

Reference:
Article; Wang, Shuxiang; Guan, Lihong; Zang, Jie; Xing, Kun; Zhang, Jian; Liu, Dan; Zhao, Linxiang; Molecules; vol. 24; 7; (2019);,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 144689-93-0, name is Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate, A new synthetic method of this compound is introduced below., Recommanded Product: 144689-93-0

Example 3; Preparation of olmesartan medoxomilTo dimethyl acetamide (800 ml) was added 4-(1-hydroxy-1-methylethyl)-2-propyl imidazol- 5-carboxylic acid ethyl ester (100 gms) and powdered potassium carbonate (200 gms). To this was charged 4-[2-(trityltetrazol-5-yl)phenyl]benzyl bromide (300 gms) at 45-50C. The contents were stirred for 8-10 hours at 45-50C. The insolubles were filtered. The contents were cooled to 5-100C. Potassium tertiary butoxide (100 gms) was charged at a temperature below 45C. The reaction was maintained at 40-450C for 3 hrs. To this was slowly added 5-methyl-2-oxo-1 ,3-dioxane-4-yl) methyl chloride at 40-450C over a period of 1 hour. The contents were heated to 60-650C and maintained for 4 hours. The reaction mass was then cooled to 30-350C and was neutralized with concentrated hydrochloride acid. The reaction mass was filtered to remove inorganics. The reaction mass was charcoalized using charcoal (10 gms) and was stirred for 30 minutes at 40-450C. The reaction mass was filtered over hyflo. The clear filtrate was acidified with hydrochloric acid (100 ml) slowly at 25-30C. The contents were stirred at 60C for 1 hour. The reaction mass was chilled to 0-5C and was filtered to remove tritanol. The reaction mass was concentrated under reduced pressure. The residue was quenched with water (500 ml), neutralized with base and extracted in dichloromethane (500 ml).The clear dichloromethane extract was then concentrated under reduced pressure, stripped off with acetone. The residue thus obtained was isolated from the acetone (250 ml) to give 55 gms of the title compound. Chromatogrphic purity- > 99%

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; CIPLA LIMITED; CURTIS, Philip, Anthony; WO2008/43996; (2008); A2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 144689-93-0, A common heterocyclic compound, 144689-93-0, name is Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate, molecular formula is C12H20N2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Into a 100-mL two-neck flask were sequentially added imidazole 4(5 g, 21.0 mmol), bromide 3 (9.05 g, 22.3 mmol), K2CO3 (5.1 g,37.4 mmol) and MeCN (50 mL) at 25 C. The reaction mixture washeated at 84 C until completion of the reaction (18 h). Then, themixture was cooled to 25 C and filtered through Celite. TheCelite bed was washed with EtOAc (2 × 10 mL). To the combinedEtOAc layer was added H2O (100 mL). The resulting two layerswere separated and the aqueous layer was extracted with EtOAc (3× 50 mL). The combined organic layer was washed with 2% aq HCl(30 mL) followed by brine (150 mL). The organic layer was driedover Na2SO4 and concentrated under reduced pressure to give 1a;yield: 9.78 g (83%)

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Seki, Masahiko; Synthesis; vol. 46; 23; (2014); p. 3249 – 3255;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 496-46-8, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 496-46-8, name is Tetrahydroimidazo[4,5-d]imidazole-2,5(1H,3H)-dione belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

tetraallylglycoluril A three-neck 100 ml flask was flushed with argon. Anhydrous DMSO (40 ml) was added and glycoluril (1.42 g, 10 mmol) was dissolved. Then potassium tert-butoxide (5.62 g, 50 mmol) was gradually added and the mixture was further stirred for 1.0 h. Allyl bromide (7.0 ml, 80 mmol) was injected into the reaction mixture and the reaction was performed at 25C for 20 h. 500 ml aqueous solution of HCl (0.1 M) was added into the reaction mixture. 100 ml ethyl acetate was used to extract the mixture andthe organic phase was washed by saturated NaCl aqueous solution(100 ml) for three times. After being dried by MgSO4, the solventwas removed. 1.53 g target product was obtained after purifica-tion over silica column with the eluent of ethyl acetate/petroleumether (60-90C) (v/v, 3:2). All procedures were performed in argonatmosphere.

The synthetic route of Tetrahydroimidazo[4,5-d]imidazole-2,5(1H,3H)-dione has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chen, Bingfeng; Li, Fengbo; Huang, Zhijun; Lu, Tao; Yuan, Guoqing; Applied Catalysis A: General; vol. 481; (2014); p. 54 – 63;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 37148-86-0, name is 4-(4-(Trifluoromethyl)phenyl)-1H-imidazole, A new synthetic method of this compound is introduced below., SDS of cas: 37148-86-0

Reference Example 2 (0.12 g)2-bromo-4-nitroaniline (0.12 g), cesium carbonate (0.28 g), copper (I) oxide (8.1 mg) and 4,7- dimethoxy-1,10 -Phenanthroline (0.027 mg) was added. The reaction solution was stirred under microwave irradiation at 180 C. for 1 hour and then cooled to room temperature. Water was added to the reaction solution, and the mixture was extracted with ethyl acetate. The organic layer was washed with saturated brine, dried over magnesium sulfate, and the solvent was distilled off under reduced pressure. The obtained residue was purified by silica gel chromatography (elution solvent; hexane: ethyl acetate) to obtain Example 40 (30 mg).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; SUMITOMO DAINIPPON PHARMA COMPANY LIMITED; ISOBE, YOSHIAKI; BAN, HITOSHI; SAITO, YASUHIRO; WATANABE, HITOSHI; (44 pag.)JP2018/135270; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 14741-71-0, A common heterocyclic compound, 14741-71-0, name is Ethyl 2-(1H-benzo[d]imidazol-2-yl)acetate, molecular formula is C11H12N2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a solution of compound 3 (2.04 g, 0.01 mol) in ethanol (40 mL) containing piperidine (0.50 mL) ethyl orthoformate (1.48 g, 0.01 mol) and aniline oil (0.93 g, 0.01 mol) was added. The reaction mixture was heated under reflux for 3 h then poured onto ice/water mixture containing few drops of hydrochloric acid and the formed solid product was collected by filtration. Pale yellow crystals from ethanol; yield: 2.35 g (79%); m.p. >300 oC. IR, : 3471-3329 (NH), 3055 (CH aromatic), 2980, 2873 (CH3, CH2), 1699 (CO), 1643 (C=N), 1629 (C=C). 1H-NMR: : 1.15 (t, 3H, J = 7.13 Hz, CH3), 4.23 (q, 2H, J = 7.13 Hz, CH2), 6.03 (s, 1H, CH=C), 7.26-7.42 (m, 9H, C6H5, C6H4), 8.23, 8.34 (2s, 2H, 2NH, D2O exchangeable). 13C NMR (DMSO): 16.2 (ester CH3), 52.5 (ester CH2), 88.4, 90.3 (C=C), 120.6, 121.6, 123.6, 123.8, 124.1, 125.3, 126.4, 127.3, 128.8, 129.5 (C6H5, C6H4), 164.8 (CO), 173.3 (C=N), Anal. calcd for C18H17N3O2: C, 70.34; H, 5.58; N, 13.67%. Found: C, 70.29; H, 5.73; N, 13.82%. MS: m/z: (%) 307 (M+, 22%).

The synthetic route of 14741-71-0 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Mohareb, Rafat M.; Gamaan, Marwa S.; Bulletin of the Chemical Society of Ethiopia; vol. 32; 3; (2018); p. 541 – 557;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

144689-93-0, name is Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate, belongs to imidazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 144689-93-0

An eggplant flask was charged with 5- (1-hydroxy-1-methylethyl) -2-propyl-3H-imidazole-4-carboxylic acid ethyl ester (10 g, 41.7 mmol; imidazole derivative (compound of formula (4b)), 4-bromobenzyl bromide (10.8 g, 43 mmol; dihalogen compound),Dimethylacetamide (40 ml; first reaction solvent (DMA)) was added to a mixture of potassium carbonate (7.1 g, 51.6 mmol; base) and stirred for 48 hours. After the reaction, water (120 mL) was added to the reaction solution and stirred. The precipitated crystals were filtered and recrystallized from ethyl acetate to give 3- (4-bromobenzyl) -5- (1-hydroxy-1-methylethyl) -2-propyl-3H-imidazole-4-carboxylic acid ethyl ester(A halogenated imidazole derivative (compound of the formula (1b))) 8 g (yield 47%).

The synthetic route of 144689-93-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Tokuyama Corporation; Sekine, Masahiko; Tanaka, Kenji; (31 pag.)JP2018/154611; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem