Tag: M.W=0-100

Reference of 288-32-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 288-32-4, name is 1H-Imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

3.2 g (20 mmol) of FeCl3,16.8 g (100 mmol) of 1- (1-chloroethyl) -2,3-dimethylbenzene,7.5 g (110 mmol) of imidazole and 35 ml of ionic liquid ([omim] BF6) were added to the reaction flask,The reaction was stirred at 75 C for 0.5 hours,After monitoring the reaction,Pour into the water,Dichloromethane extraction,The organic phase was washed three times,Dry the organic phase over anhydrous sodium sulfate,Concentrated under reduced pressure,The petroleum ether was recrystallized to obtain 17.0 g of 4- [1- (2,3-dimethylphenyl) ethyl] -1H-imidazole,Yield 84.8%.

The synthetic route of 1H-Imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Tsingtao Chenda Biological Technology Co., Ltd.; Lv Yanhua; (8 pag.)CN106588778; (2017); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 10111-08-7, name is Imidazole-2-carboxaldehyde, A new synthetic method of this compound is introduced below., Safety of Imidazole-2-carboxaldehyde

General procedure: To a mixture of formylimidazole 1 and K2CO3 in DMF, the required bromide or mesylate was added and the reaction mixture was stirred overnight under atmosphere of nitrogen at rt. The resulting suspension was cooled to room temperature (rt) and filtered. Water was added to the filtrate and the resulting solution was extracted with Et20 (3 x 25 mL). The organic layer was dried over MgS04 and evaporated to give the corresponding alkylimidazole-2- carbaldehyde. l-(3-Azidopropyl) imidazole-2-carbaldehyde oxime (RS138B). Prepared according to the general method A using formylimidazole 1 (0.50 g, 5.2 mmol), K2CO3 (0.72 g, 5.2 mmol), and 3-azidopropyl methanesulfonate (1.1 g, 6.2 mmol) in DMF (20 10 mL). Yellow oil 2f (0.62 g, 67 %).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; THE REGENTS OF THE UNIVERSITY OF CALIFORNIA; THE SCRIPPS RESEARCH INSTITUTE; TAYLOR, Palmer; RADIC, Zoran; FOKIN, Valery; WO2015/57822; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 930-62-1, name is 2,4-Dimethylimidazole, A new synthetic method of this compound is introduced below., SDS of cas: 930-62-1

Preparation 14 Ethyl N-trifluoroacetyl-N-(2-nitro-5-[2,4-dimethylimidazol-1-yl]benzyl)glycinate STR36 A mixture of 2,4-dimethylimidazole (6.25 g), ethyl N-trifluoroacetyl-N-(5-fluoro-2-nitrobenzyl)glycinate (22.0 g) and sodium carbonate (6.62 g) was stirred and heated at 130 for 2 hours. Volatile material was removed from the cooled mixture in vacuo and the residue was partitioned between ethyl acetate (200 cm3) and water (100 cm3). The organic phase was washed with water (2*25 cm3), dried (MgSO4), and evaporated in vacuo to give an oil which was chromatographed on silica (Merck “MK 60.9385” [Trade Mark]) eluding with ethyl acetate:methanol, 1:19. Combination and evaporation of the appropriate fractions gave an oil which crystallized on trituration with ether to afford the title compound, m.p. 172.5-176 (3.1 g). Analysis %: Found: C,50.7; H,4.8; N,12.7; Calculated for C18 H19 F3 N4 O5: C,50.5; H,4.5; N,13.1.

The synthetic route of 930-62-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pfizer Inc.; US4783467; (1988); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 3034-50-2, name is Imidazole-4-carbaldehyde belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C4H4N2O

To a mixture of 1H-imidazole-4-carbaldehyde (3.71 g, 38.6 mmol), 1-chloro-4-iodobenzene(13.81 g, 57.9 mmol), (1R,2R)-N1,N2-dimethylcyclohexane-1,2-diamine (1.10 g, 7.72 mmol),copper(l) iodide (0.368 g, 1.93 mmol) and cesium carbonate (25.2 g, 77 mmol) was added DMF (50 mL). The reaction was sealed and heated to 110 00 for 18 hours. The reaction mixture was then cooled to room temperature and diluted with a saturated solution of NH4CI.brown solid develops. Solid was collected, washed with water and air dried. Solid materialwas then dissolved in 10%MeOH:90%DCM solution and dried (Na2504), filtered and concentrated to afford a dark brown solid 1-(4-chlorophenyl)-1 H-imidazole-4-carbaldehyde (8.55 g, 41.4 mmol, 107 % yield). Material as used without further purification. LCMS m/z 207.1 (M + H), Rt 0.58 mm.Step 1

The synthetic route of 3034-50-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; CAFERRO, Thomas Raymond; CHEN, Zhuoliang; CHO, Young Shin; COSTALES, Abran Q.; LEVELL, Julian Roy; LIU, Gang; MANNING, James R.; SENDZIK, Martin; SHAFER, Cynthia; SHULTZ, Michael David; SUTTON, James; WANG, Yaping; ZHAO, Qian; WO2014/141104; (2014); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 57090-88-7, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 57090-88-7, name is 1H-Imidazole-4-carbonitrile, This compound has unique chemical properties. The synthetic route is as follows.

A flask charged with imidazole-4-carbonitrile (0.50 g, 5.2 mmol) (Synthesis, 677, 2003), 2-(trimethylsilyl)ethoxymethyl chloride (SEMCl) (0.95 mL, 5.3 mmol), K2CO3 (1.40 g, 10.4 mmol), and acetone (5 mL) was stirred for 10 h at RT. The mixture was diluted with ethyl acetate (EtOAc) (20 mL) and washed with water (20 mL) and brine (20 mL) and the organic layer was dried over MgSO4. The crude product was eluted from a 20-g SPE cartridge (silica) with 30percent EtOAc/hexane to give 0.80 g (70percent) of the title compound as a colorless oil. Mass spectrum (CI (CH4), m/z) Calcd. for C10H17N3OSi, 224.1 (M+H), found 224.1.

The chemical industry reduces the impact on the environment during synthesis 1H-Imidazole-4-carbonitrile. I believe this compound will play a more active role in future production and life.

Reference:
Patent; Illig, Carl R.; Ballentine, Shelley K.; Chen, Jinsheng; DesJarlais, Renee Louise; Meegalla, Sanath K.; Wall, Mark; Wilson, Kenneth; US2007/249649; (2007); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 288-32-4, name is 1H-Imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 288-32-4, Recommanded Product: 1H-Imidazole

General procedure: To a stirred solution of 500 mg of the appropriate bromide 12 or 13 in 25 mL anhydrous acetone, under N2 at room temperature, is added 1.5 eq. of the desired nitrogenous heterocycle followed by 1.5 eq. of K2CO3 and 0.05 eq. of KI. The reaction mixture is left to react overnight at reflux temperature. The resulting solution is diluted with 100 mL of water and extracted with 3 × 30 mL EtOAc. The organic fractions are combined, washed twice with 30 mL KOH 1 M, twice with brine, dried over MgSO4, filtered and concentrated. The residue is purified by silica gel circular chromatography (eluent: EtOAc/Hex or MeOH/CH2Cl2) to yield the pure heterocyclic compounds. 1-substituted-1H-1,2,3-triazoles and 2-substituted-2H-1,2,3-triazoles (17/18, 19/20) were obtained simultaneously. These isomers were separated by silica gel circular chromatography.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1H-Imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Doiron, Jeremie; Soultan, Al Haliffa; Richard, Ryan; Toure, Mamadou Mansour; Picot, Nadia; Richard, Remi; Cuperlovic-Culf, Miroslava; Robichaud, Gilles A.; Touaibia, Mohamed; European Journal of Medicinal Chemistry; vol. 46; 9; (2011); p. 4010 – 4024;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 288-32-4,Some common heterocyclic compound, 288-32-4, name is 1H-Imidazole, molecular formula is C3H4N2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1. 4-(Imidazol-1-yl)nitrobenzene. To a stirred solution of imidazole (34.1 g, 0.50 mol) in DMF (300 ml) under Ar, was added portionwise, over 23 minutes, 60% NaH in oil (20.02 g, 0.50 mol). The mixture was then stirred at room temperature for 18 minutes before adding dropwise, over 40 minutes, a solution of 1-fluoro-4-nitrobenzene (70.62 g, 0.50 mol) in DMF (60 ml). The mixture was then stirred at room temperature overnight. Water (600 ml) was then added and the solid was filtered off, washed with water, then stirred in boiling ethyl acetate (400 ml), allowed to cool and filtered, washing the solid with more ethyl acetate (50 ml), then petroleum ether (250 ml). The filtrate, now containing more solid, was refiltered and washed with petroleum ether. The combined solids were dried in a vacuum dessicator overnight to give 90.14 g (95%) of the title compound as a yellow solid. deltaH (360 MHz, DMSO-d6) 9 (1H, t, J=1.1 Hz), 7.97-8.03 (3H, m), 8.38 (2H, d, J=9.2 Hz), 8.52 (1H, t).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1H-Imidazole, its application will become more common.

Reference:
Patent; Merck Sharp & Dohme, Ltd.; US5854268; (1998); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

These common heterocyclic compound, 7098-07-9, name is 1-Ethyl-1H-imidazole, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 1-Ethyl-1H-imidazole

To the dry 100 mL three-necked flask was added 6.3 g (10 mmol) of M2 ‘, 0.96 g (10 mmol) of 1-ethyl terephthalate, 50 mL of acetonitrile, reacted at room temperature for 4 days and TLC was used to monitor the reaction end. Washed with petroleum ether (100 mL x 3) to give a viscous liquid which was washed with ether (100 mL x 3), dried in vacuo for 24 h, To give 7.2 g of the title compound (B5) as a brown oily liquid in a yield of 99percent.

The synthetic route of 1-Ethyl-1H-imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Central China Normal University; Zhang Aidong; Zhang Tiejiang; Duan Jiang; Tu Haiyang; (22 pag.)CN107188869; (2017); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 822-36-6, name is 4-Methyl-1H-imidazole, A new synthetic method of this compound is introduced below., Formula: C4H6N2

A suspension of 3- bromo-5-(trifiuoromethyl)aniline (4.8 g, 20 mmol), 4-methylimidazole (1.97 g, 24 mmol), potassium carbonate (3.04 g, 22 mmol), CuI (0.57 g, 3 mmol), and 8-hydroxyquinoline (0.44 g, 3 mmol,) in dry DMSO (20 mL) in a pressure tube was degassed by bubbling N2 into the suspension for 10 minutes while stirring. The tube was sealed tightly. The mixture was heated at 120 0C (oil bath temperature) for 15 h. The mixture was cooled down to 45- 50 0C and 14% aq. NH4OH (20 mL) was added. The mixture was maintained at this temperature for 1 h. After cooling to rt, water and ethyl acetate were added. The aqueous layer was extracted with ethyl acetate and the combined organic layers were passed through a short silica gel column to remove most of green/blue Cu salts. The filtrate was dried over sodium sulfate and concentrated on a rotavap. The crude product was recrystallized from EtOAc/hexanes, giving pure pale yellow needles. The mother liquor was concentrated and the residue was purified on silica gel column (5% methanol/methylene chloride), yielding a second crop as pale yellow needles.

The synthetic route of 822-36-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ARIAD PHARMACEUTICALS, INC.; WO2007/75869; (2007); A2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 3034-50-2, name is Imidazole-4-carbaldehyde, A new synthetic method of this compound is introduced below., Computed Properties of C4H4N2O

Synthesis of 1-Trityl-1H-imidazole-4-carbaldehyde STR49 To dimethylformamide (100 mL) was added imidazole-4-carboxaldehyde (10 g, 0.104 mol, Aldrich Chemical Corp.) and triethylamine (20.5 mL, 0.147 mol). A solution of trityl chloride (40 g, 0.143 mol) in dimethylformamide (300 mL) was added, followed by stirring at 25 C. for 6 hours. The solvent was removed in vacuo, and the residue was dissolved in ethyl acetate (1.5 L) and 1N citric acid (350 mL). The phases were separated, and the organic phase was washed with brine, dried over anhydrous magnesium sulfate, and filtered. Concentration of the solution in vacuo gave a white solid, 27.59 g, 78% yield. NMR was consistent with structure. MS: APCI: M-1: 337.2 (M: 338.41).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Warner-Lambert Company; US6143766; (2000); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem