Tag: M.W=100-200

Application of 3097-21-0, These common heterocyclic compound, 3097-21-0, name is 1,3-Dimethyl-1H-benzo[d]imidazol-2(3H)-one, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Take 1,3-dimethyl-1,3-dihydro-2H-benzo [d] imidazol-2-one (1.0 g, 6.1 mmol),Add to chlorosulfonic acid and react at room temperature for 5 hours;After the reaction is completed, water is added to precipitate a solid, which is filtered with suction, recrystallized, and filtered with suction, and the filter cake is dried under infrared.A gray solid was obtained with a yield of 88%.

The synthetic route of 3097-21-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; China Pharmaceutical University; Sun Haopeng; Mo Jun; Li Qihang; Yang Hongyu; Chen Yao; Chen Tingkai; Li Qi; Guo Yan; Liu Zongliang; Feng Feng; Liu Wenyuan; (19 pag.)CN110776494; (2020); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 16265-04-6, name is 2-Chloro-1H-imidazole, A new synthetic method of this compound is introduced below., Quality Control of 2-Chloro-1H-imidazole

A reaction vessel A’-1 (1.74g, 17.0mmol), A’-2 (2.07g, 17.0mmol), Tetrakis (triphenylphosphine) palladium (0.7g, 1.08mmol), Potassium carbonate (5.3 g, 38.3mmol), toluene (60 mL), ethanol (20 mL) and distilled water (20 mL) were added, followed by stirring at 60 C for 3 hours.After the reaction was completed, the reaction mixture was cooled to room temperature, extracted with ethyl acetate, dried over MgSO 4, and then the organic solvent was removed, and A-1 (1.67 g, 68%) was obtained by silica column method

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Choi Don-su; Choi Jin-sol; (70 pag.)KR2019/35043; (2019); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 570-22-9, name is 1H-Imidazole-4,5-dicarboxylic acid belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 1H-Imidazole-4,5-dicarboxylic acid

General procedure: 10 mL ethanol solution of 2.0 mmol metal salt was added into 10 mL ethanol solution of 2.0 mmol 4,5-imidazole dicarboxylic acid. Having blended the mixture under reflux for 1 h, methanol solution of 1.0 mmol NaOH was put into hot mixture drop by drop. After 5 h under reflux, solvent of the solution was removed, precipitate was filtered. The precipitates were washed with methanol 3 times and dried in 105 C. Molecular structures of complexes obtained from the reaction of 4,5-imidazole dicarboxylic acid ligand with metal salts were summarized in Fig. 2.1.

The synthetic route of 570-22-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Erdem, Ozlem; Yildiz, Emel; Inorganica Chimica Acta; vol. 438; (2015); p. 1 – 4;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 32673-41-9, name is 4-Imidazolemethanol hydrochloride, A new synthetic method of this compound is introduced below., Recommanded Product: 4-Imidazolemethanol hydrochloride

Referential Example 8 4-(Dichloromethyl)-2-(4-(hydroxymethyl)imidazole-1-yl)-5-nitro-benzotrifluoride To a solution of the compound of Referential example 7 (5.31 g, 18.2 mmol) in tetrahydrofuran (40 ml) were added 4-(hydroxymethyl)imidazole hydrochloride (4.90 g, 36.4 mmol) and triethylamine (7.37 g, 72.8 mmol), and the mixture was refluxed for 1.5 hours. After cooling, ethyl acetate was added to the reaction mixture, washed with brine, then dried over anhydrous magnesium sulfate and solvent was distilled off. The residue obtained was submitted to silica gel column chromatography [ethyl acetate-hexane(3:1)?ethyl acetate] to obtain 5.15 g of title compound as pale yellow powder. Yield 76%. 1H-NMR(DMSO-d6, delta): 4.44(2H,d,J=4.4 Hz), 5.09(1H,t,J=4.4 Hz), 7.39 (1H,s), 7.78(1H,s), 7.92(1H,s), 8.19(1H,s), 8.59(1H,s).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Kyorin Pharmaceutical Co., Ltd.; US6562839; (2003); B1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 2302-25-2, name is 4-Bromo-1H-imidazole, A new synthetic method of this compound is introduced below., Quality Control of 4-Bromo-1H-imidazole

Into a 3 L,4-necked round-bottom flask purged and maintained with an inert atmosphere of nitrogen,was placed a solution of sodium hydride (53 g,1.32 mol) in dmf (500 mL),4-bromo-1H-imidazole (172 g,1.17 mol). After stirring for 30 mm at 40 C,a solution of(1-methylcyclopentyl)methyl methanesulfonate (150 g,780 mmol) in dmf (1 L) was addedportionwise. The resulting solution was stined overnight at 90 C. The reaction mixture was cooled to 20C with a water/ice bath and was quenched by the addition of water (3 L). The organic was extracted with ethyl acetate (1 Lx 3) and the combined organic layers were washed with brine (1 L),dried over anhydrous sodium sulfate and concentrated under vacuum. The residue was applied onto a silica gel column (1:15 ethyl acetate:petroleum ether) to provide the title compound.

The synthetic route of 2302-25-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; MERCK SHARP & DOHME CORP.; MSD R&D (CHINA) CO., LTD.; ACTON, John J.; BAO, Jianming; EGBERTSON, Melissa; GAO, Xiaolei; HARRISON, Scott Timothy; KNOWLES, Sandra Lee; LI, Chunsing; LO, Michael Man-Chu; MAZZOLA, Robert D., Jr.; MENG, Zhaoyang; RUDD, Michael T.; SELYUTIN, Oleg; TELLERS, David M.; TONG, Ling; WAI, Jenny Miu-Chun; (125 pag.)WO2017/107089; (2017); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Some common heterocyclic compound, 41806-40-0, name is 1-Methylimidazole-5-carboxylic Acid, molecular formula is C5H6N2O2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C5H6N2O2

[2514] Take crude (881) from Step A, and dissolve in DMF (60 ml), and add NH(OMe)Me(3.14 g), DEC(6.14 g), HOBT(2.16 g), NMM(11 ml), and stir at room temperature over night. Add 1.0 N HCL until acetic (pH=2), wash with diethyl ether. Add, while stirring, K2CO3 until basic pH=8, saturate with NaCl, and extract with (4×).CH2Cl2. Dry with MgSO4, filter and evaporate to obtain product (882) (3.23 g).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 41806-40-0, its application will become more common.

Reference:
Patent; Schering Corporation; US2004/122018; (2004); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 36947-68-9, name is 2-Isopropyl-1H-imidazole, A new synthetic method of this compound is introduced below., Safety of 2-Isopropyl-1H-imidazole

A mixture of 4-chloro-1-fluoro-2-nitrobenzene 1.01 g, 2-isopropylimidazole 634 mg, N,N-diisopropylethylamine, 1.46 mL and acetonitrile 12 mL was heated under reflux for 15 hours. The solvent was distilled off and water was added to the residue which was then rendred acidic with diluted hydrochloric acid. After washing the same with diethyl ether, the aqueous layer was rendered alkaline with aqueous sodium hydroxide solution and extracted twice with chloroform. The organic layer was washed with water, dried over magnesium sulfate, and removed of the solvent by distillation to provide 0.98 g of the title compound. 1H-NMR(CDCl3, delta): 1.22(6H, d, J=6.9Hz), 2.5-2.8(1H, m), 6.81(1H, d, J=1.2Hz), 7.09(1H, d, J=1.5Hz), 7.39(1H, d, J=8.5Hz), 7.71(1H, dd, J=2.3, 8.5Hz), 8.05(1H, d, J=2.7Hz). MS(m/z): 267(M++2), 265(M+).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ASKA Pharmaceutical Co., Ltd.; EP2103613; (2009); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 934-22-5, name is 6-Aminobenzimidazole, A new synthetic method of this compound is introduced below., Safety of 6-Aminobenzimidazole

General procedure: A dry 50 mL flask was charged with 2-halogenated aromatic aldehyde 1 (1.0 mmol), 1H-benzo[d]imidazol-5-amine (0.133 g,1.0 mmol), cyclohexane-1,3-diones (1.0 mmol), CuI (10 mg), L-proline(6 mg), Cs2CO3 (650 mg) and dioxane (10 mL). The reaction mixture was stirred at reflux for 10-18 h. After completion of the reaction, as indicated by TLC, the solid was filtered off by a fast and hot filtration, and the products of 4 were obtained as pale yellow powder or crystals, when the mixture was allowed to cool down to room temperature.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Li, Chao; Zhang, Wen-Ting; Wang, Xiang-Shan; Tetrahedron; vol. 70; 46; (2014); p. 8919 – 8924;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 41716-18-1, A common heterocyclic compound, 41716-18-1, name is 1-Methyl-1H-imidazole-4-carboxylic acid, molecular formula is C5H6N2O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1-hydroxybenzotriazole monohydrate (16 mg, 0.118 mmol), 3- (ethyliminomethyleneamino)-N,N-dimethyl-propan-1-amine (Hydrochloric Acid (1)) (35 mg, 0.183 mmol), and 1-methyl-1H-imidazole-4-carboxylic acid (15 mg, 0.119 mmol) were combined in DMF (0.2 mL) under nitrogen at room temperature and allowed to stir for 40 min. 4-(7-morpholinoquinazolin-5-yl)oxycyclohexanamine (25 mg, 0.0761 mmol) was added, and stirring was continued a further 30 min. Saturated sodium bicarbonate was added, an the mixture was extracted with EtOAc (2x). The combined organics were washed with water (2x), brine, dried over sodium sulfate, and concentrated under reduced pressure. The resulting residue was purified by chromatography over 4g silica gel using a 0-10% methanol / DCM gradient to yield 1- methyl-N-((1s,4s)-4-((7-morpholinoquinazolin-5-yl)oxy)cyclohexyl)-1H-imidazole-4- carboxamide (6 mg, 17%). 1H NMR (400 MHz, CDCl3) delta 9.44 (s, 1H), 9.10 (s, 1H), 7.51 (d, J = 1.3 Hz, 1H), 7.40 – 7.34 (m, 1H), 7.09 (d, J = 8.4 Hz, 1H), 6.78 (d, J = 1.9 Hz, 1H), 6.57 (d, J = 2.0 Hz, 1H), 4.74 (d, J = 3.9 Hz, 1H), 4.11 (tq, J = 9.9, 6.2, 5.3 Hz, 1H), 3.89 (dd, J = 5.9, 3.9 Hz, 4H), 3.73 (s, 3H), 3.43 – 3.33 (m, 4H), 2.29 – 2.17 (m, 2H), 2.04 – 1.73 (m, 6H). ESI-MS m/z = 433.05 (M+1)+.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; VERTEX PHARMACEUTICALS INCORPORATED; MAXWELL, John, Patrick; JACKSON, Katrina, Lee; TANG, Qing; MORRIS, Mark, A.; RONKIN, Steven, M.; XU, Jinwang; COTTRELL, Kevin, M.; CHARIFSON, Paul, S.; (280 pag.)WO2019/143678; (2019); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 1003-21-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 1003-21-0, name is 5-Bromo-1-methyl-1H-imidazole belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

Example 88a: (4-chloro-2-methoxy-3-(4-(trifluoromethyl)benzyl)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)(1-methyl-1H-imidazol-5-yl)methanol To a flask containing 5-bromo-l -methyl- lH-imidazole (650 mg, 4.04 mmol) was added THF (10 mL) and the clear homogeneous solution was stirred at room temperature as z’PrMgCl (2 M in diethylether, 2 mL, 4 mmol) was added. A whitish suspension resulted. The suspension was stirred at room temperature for 30 minutes, then a solution of 4-chloro-2-methoxy-3-(4- (trifluoiOmefhyl)benzyr)quinolin-6-yl)(2,6-dimethylpyridin-3-yl)methanone (660 mg, 1.36 mmol, Intermediate 81 : step b) in THF (5 mL) containing LaCl3-LiCl complex (0.5 M solution THF, 5 mL, 2.5 mmol) was added to the reaction mixture. The reaction mixture was stirred overnight at 35 C. After 14 hours, the reaction mixture was quenched with saturated aqueous NH4C1 solution. The aqueous portion was extracted with EtOAc (3 x 40 mL) and the combined organics were washed with brine and dried over MgS04. The brine portion was back-extracted with DCM (3 x 40 mL) and dried over MgS04. The organics were filtered and concentrated to dryness to afford a tan oil. The residue was purified by FCC (2% MeOH-DCM increasing to 10% MeOH) to provide the title compound as an off white solid.lH NMR (500 MHz, CDCI3) delta 8.13 (d, J = 2.0 Hz, 1H), 7.76 (d, J = 8.7 Hz, 1H), 7.50 (d, J = 8.2 Hz, 2H), 7.44 – 7.35 (m, 4H), 7.31 (d, J= 1 1.4 Hz, 1H), 7.05 (d, J= 8.0 Hz, 1H), 6.90 (d, J = 8.0 Hz, 1H), 6.19 (s, 1H), 4.67 (s, 1H), 4.32 (s, 2H), 4.07 (s, 3H), 3.46 (s, 3H), 2.52 (s, 3H), 2.45 – 2.33 (m, 3H); MS (ESI): mass calcd. Chemical Formula: C30H2CIF3N4O?, Exact Mass: 566.2, m/z found 567.1 [M+H]”.(4~Chk>ro~2~niethoxy~3-(4-(irifluQmethyl- lH-im.idazol-5-yl)methanol was purified by chiral SFC (Stationary phase: CHIRALPAK AD-H 5 muetaiota 250 x 20 mm, Mobile phase: 75% C02, 25% EtOH), to give two enantiomers. The first eluting enantiomer was Example 88b and the second eluting enantiomer was Example 88c.

The synthetic route of 5-Bromo-1-methyl-1H-imidazole has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JANSSEN PHARMACEUTICA NV; LEONARD, Kristi A.; BARBAY, Kent; EDWARDS, James P.; KREUTTER, Kevin D.; KUMMER, David A.; MAHAROOF, Umar; NISHIMURA, Rachel; URBANSKI, Maud; VENKATESAN, Hariharan; WANG, Aihua; WOLIN, Ronald L.; WOODS, Craig R.; FOURIE, Anne; XUE, Xiaohua; CUMMINGS, Maxwell D.; JONES, William Moore; GOLDBERG, Steven; WO2015/57205; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem