Tag: M.W=100-200

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 50995-95-4, name is 2-Propylimidazole, A new synthetic method of this compound is introduced below., Recommanded Product: 2-Propylimidazole

General procedure: A solution of imidazole 4-13, benzimidazole 40, 41, pyridoimidazole 42 or benzotriazole 43 (23 mmol) in dry DMF (15 mL) and K2CO3 (11.5 mmol) was stirred for 10 min at 0-5 C, under nitrogen atmosphere. After this time, appropriate 1-aryl-2-bromo-ethanone 18-21 (23 mmol) was added and the mixture was stirred for 1.5 h then poured into ice water. The resulting crude material was extracted with dichloromethane (3 × 50 mL). The combined organic layers were dried over anhydrous sodium sulfate, filtered and concentrated under reduced pressure; the obtained residue were purified by means of flash chromatography performed using silica gel 60 (230-400 mesh) and a mixture of ethyl acetate/methanol 8:2 v/v or dichloromethane/methanol 9.5/0.5 v/v (only for purification of 25 and 26, 49 and 51, 50 and 52, respectively) as eluent.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Salerno, Loredana; Modica, Maria N.; Romeo, Giuseppe; Pittala, Valeria; Siracusa, Maria A.; Amato, Maria E.; Acquaviva, Rosaria; Di Giacomo, Claudia; Sorrenti, Valeria; European Journal of Medicinal Chemistry; vol. 49; (2012); p. 118 – 126;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 360-97-4, name is 4-Amino-1H-imidazole-5-carboxamide, A new synthetic method of this compound is introduced below., Quality Control of 4-Amino-1H-imidazole-5-carboxamide

To a solution of 5-amino-lH-imidazole-4-carboxylic acid amide (lOg, 79.36 mmol) and DMAP (291 mg, 2.38 mmol) in anhydrous pyridine (200 mL) was slowly added 2,2- dimethyl-propionyl chloride (10.74 mL, 87.30 mmol) and the reaction mixture was stirred at 80 C for 8 h. The solvent was evaporated under reduced pressure and the residue was diluted with cold water (50 mL). The precipitate was filtered, washed with water (30 mL) and dried to get yield the title compound (9 g, 54 %) as ash-color solid. MS(m/e): 211.4 (M+H).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; BENDELS, Stefanie; GRETHER, Uwe; KIMBARA, Atsushi; NETTEKOVEN, Matthias; ROEVER, Stephan; ROGERS-EVANS, Mark; SCHULZ-GASCH, Tanja; WO2014/177490; (2014); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 1003-21-0,Some common heterocyclic compound, 1003-21-0, name is 5-Bromo-1-methyl-1H-imidazole, molecular formula is C4H5BrN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Ethyl magnesium bromide (3.0 M in diethyl ether, 21.5 mL, 64.4 mmol) was added via syringe over a few minutes to a clear colorless solution of 5-bromo-1-methyl-1H-imidazole (10.4 g, 64.4 mmol) in THF (100 mL) under a nitrogen atmosphere in an ice bath. A white precipitate formed during the addition. The mixture was removed from the ice bath and was stirred for 20 minutes, then was again cooled in an ice bath before addition of 4-chloro-N-methoxy-N-methylbenzamide (10.7 g, 53.6 mmol, Intermediate 22: step a). The resulting white suspension was stirred overnight at room temperature. The reaction was quenched by addition of saturated aqueous NH4Cl and diluted with water. The mixture was partially concentrated to remove THF and was diluted with DCM. The mixture was acidified to pH 1 with 1 N aqueous HCl, then neutralized with saturated aqueous NaHCO3. The phases were separated and the aqueous phase was further extracted with DCM. The organic extracts were washed with water, then were dried (Na2SO4), filtered, and concentrated, affording a white solid. The crude product was triturated with a mixture of EtOAc:heptanes (1:1, 150 mL). The precipitated solid was collected by vacuum filtration, washing with heptanes, to afford the title compound.

The synthetic route of 1003-21-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; JOHNSON & JOHNSON; LEONARD, KRISTI A.; BARBAY, KENT; EDWARDS, JAMES P.; KREUTTER, KEVIN D.; KUMMER, DAVID A.; MAHAROOF, UMAR; NISHIMURA, RACHEL; URBANSKI, MAUD; VENKATESAN, HARIHARAN; WANG, AIHUA; WOLIN, RONALD L.; WOODS, CRAIG R.; FOURIE, ANNE; XUE, XIAOHUA; CUMMINGS, MAXWELL D.; MCCLURE, KELLY; TANIS, VIRGINIA; US2015/111870; (2015); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 60-56-0, name is 1-Methyl-1H-imidazole-2(3H)-thione, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 60-56-0

Example 257 7-{1-[(1-Methyl-1H-imidazol-2-yl)thio]ethyl}-2-(1,3-thiazol-2-yl)-1H-indole A solution of 1-[2-(1,3-thiazol-2-yl)-1H-indol-7-yl]ethanol (0.089 g), 1-methyl-1H-imidazole-2-thiol (0.046 g) and tributylphosphine (0.458 g) in tetrahydrofuran (7 mL) was stirred, 1,1′-(azodicarbonyl)dipiperidine (0.584 g) was added, and the mixture was stirred at room temperature for 1 hr. Water was added to the reaction mixture, and the mixture was extracted with ethyl acetate. The extract was washed successively with water and saturated brine, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (ethyl acetate_hexane=30:70 – 70:30) to give the title compound (0.110 g, yield 89%) as colorless crystals. MS m/z 341 (M+H+).

According to the analysis of related databases, 60-56-0, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Takeda Pharmaceutical Company Limited; EP1873144; (2008); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

106429-59-8, name is 2-Oxo-2,3-dihydro-1H-benzo[d]imidazole-5-carbaldehyde, belongs to imidazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. name: 2-Oxo-2,3-dihydro-1H-benzo[d]imidazole-5-carbaldehyde

Step 3. N-(2-amino-2-oxoethyl)-N-(5-fluoro-2-((4-(7-((2-oxo-2,3-dihydro-1H- benzo[d]imidazol-5-yl)methyl)-2,7-diazaspiro[4.4]nonan-2-yl)pyrimidin-5- yl)oxy)phenyl)isobutyramide (1176) To a solution of N-(2-((4-(2,7-diazaspiro[4.4]nonan-2-yl)pyrimidin-5-yl)oxy)-5- fluorophenyl)-N-(2-amino-2-oxoethyl)isobutyramide (40 mg, crude) and 2-oxo-2,3- dihydro-1H-benzo[d]imidazole-5-carbaldehyde (Intermediate 40, 29 mg, 0.18 mmol) in anhydrous MeOH (4 mL) was added 4A-molecular sieves (50 mg), then the reaction was stirred at 50 C for 2 h under N2. After 2 h, NaBH3CN (28 mg, 0.45 mmol) was added into the solution and the reaction mixture was stirred at 50 C for 12 h. The reaction mixture was then filtered, concentrated under reduced pressure, and purified by RP- HPLC method G to afford N-(2-amino-2-oxoethyl)-N-(5-fluoro-2-((4-(7-((2-oxo-2,3- dihydro-1H-benzo[d]imidazol-5-yl)methyl)-2,7-diazaspiro[4.4]nonan-2-yl)pyrimidin-5- yl)oxy)phenyl)isobutyramide as a white solid.Yield: 7.00 mg. LCMS method E: Rt = 1.498 min, (M+H)+ = 603.3.1H NMR (CD3OD): delta 8.30 (s, 1 H), 7.76 (d, J = 2.4 Hz, 1 H), 7.52 (d, J = 8.8 Hz, 1 H), 7.15 (t, J = 8.0 Hz, 1 H), 6.87-7.03 (m, 4 H), 4.73 (dd, J = 16.4, 3.6 Hz, 1 H), 3.82 (dd, J =16.0, 4.8 Hz, 1 H), 3.56-3.85 (m, 5 H), 2.45-2.69 (m, 5 H), 1.81-1.94 (m, 5 H), 1.05 (dd, J = 36.8, 6.8 Hz, 6 H).19F NMR (CD3OD): delta -119.24.

The synthetic route of 106429-59-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; VITAE PHARMACEUTICALS, INC.; CACATIAN, Salvacion; CLAREMON, David, A.; DILLARD, Lawrence, Wayne; DONG, Chengguo; FAN, Yi; JIA, Lanqi; LOTESTA, Stephen, D.; MARCUS, Andrew; MORALES-RAMOS, Angel; SINGH, Suresh, B.; VENKATRAMAN, Shankar; YUAN, Jing; ZHENG, Yajun; ZHUANG, Linghang; PARENT, Stephan, D.; HOUSTON, Travis, L.; (444 pag.)WO2017/214367; (2017); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 72-40-2, These common heterocyclic compound, 72-40-2, name is 5-Amino-1H-imidazole-4-carboxamide hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a stirred solution of 4-aminoimidazole-5-carboxamide hydrochloride [0957] (1 g, 6.151 mmol) in N,N-dimethylformamide (5 mL) was added ethylxanthic acid potassium salt (1.479 g, 9.226) and the mixture was heated at 140 C. for 5 h. The reaction mixture was concentrated under reduced pressure. The residue was triturated with acetonitrile (20 mL). The solid was filtered, washed with acetonitrile (10 mL) and dried under vacuum to afford 2-mercapto-1,9-dihydro-6H-purin-6-one [0958] as a brown solid (0.8 g, 77%). MS(M+1)+=169.0.

The synthetic route of 72-40-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Cadent Therapeutics, Inc.; Jefson, Martin R.; Keaney, Gregg F.; Larsen, Janus Schreiber; Lowe, III, John A.; McCall, John M.; (110 pag.)US2017/355708; (2017); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 36947-68-9, name is 2-Isopropyl-1H-imidazole, A new synthetic method of this compound is introduced below., HPLC of Formula: C6H10N2

To 2-isopropylimidazole (28mg) in dry N,N-dimethylformamide (ImI) was added sodium hydride (lOmg, 60% dispersion in mineral oil). After 30 minutes, 2-chloro-6- (4-methanesulfonyl-piperazin-l-ylmethyl)-4-morpholin-4-yl-thieno[3,2-d]pyrimidine, prepared via General Procedure B-3, was added and the reaction mixture was heated in the microwave for 45 minutes at 12O0C. The reaction mixture was diluted with ethyl acetate, washed with water, dried (MgSO4) and the solvent removed in vacuo and the residue purified using flash chromatography to yield 176. NMR (400MHz CDC13): 1.19(lH,s,CH), 1.30(6H,d(J=6.84), 2.61-2.63(4H,m,CH2), 2.74(3H,s,CH3), 3.23-3.25(4H,m,CH2), 3.79- 3.82(6H,m,CH2), 3.92-3.94(4H,m,CH2), 6.92(lH,s,ar), 7.18(lH,s,ar), 7.66(lH,d(J=1.49),ar). MH+ 506.30

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; PIRAMED LIMITED; GENENTECH, INC.; BAYLISS, Tracy; CHUCKOWREE, Irina; FOLKES, Adrian; OXENFORD, Sally; WAN, Nan, Chi; CASTANEDO, Georgette; GOLDSMITH, Richard; GUNZNER, Janet; HEFFRON, Tim; MATHIEU, Simon; OLIVERO, Alan; STABEN, Steven; SUTHERLIN, Daniel, P.; ZHU, Bing-Yan; WO2008/70740; (2008); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 39070-14-9, name is (1-Methyl-2-nitro-1H-imidazol-5-yl)methanol, A new synthetic method of this compound is introduced below., Safety of (1-Methyl-2-nitro-1H-imidazol-5-yl)methanol

4-Nitrophenol (162 mg, 1.17 mmol) is dissolved in methylene chloride (2 mL). To the solution is added (3-methyl-2-nitro-3H-imidazol-4-yl)-methanol (115 mg, 0.732 mmol) and triphenylphosphine (211 mg, 0.805 mmol). The mixture is stirred at room temperature until a solution is achieved. The solution is then cooled in an ice bath and treated with diisopropyl azodicarboxylate, DIAD (158 uL, 0.805 mmol). After 1 hour the ice bath is removed and the mixture is stirred overnight at room temperature. Crude product is purified on a silica gel column to isolate the product mixed with triphenylphosphine oxide. The solids are triturated with t-butyl methyl ether to remove the triphenylphosphine oxide to afford l-methyl-2-mtro-5- (4-nitro-phenoxymethyl)-lH-imidazole. MS (ESI+) for C11H10N4O5 m/z 279.1 (M+H)+.

The synthetic route of 39070-14-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; GENCIA CORPORATION; KHAN, Shaharyar; (80 pag.)WO2018/129258; (2018); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 118469-15-1, The chemical industry reduces the impact on the environment during synthesis 118469-15-1, name is 5-Fluoro-2-methyl-1H-benzo[d]imidazole, I believe this compound will play a more active role in future production and life.

In a 150 mL round bottom flask, intermediate VI-13 2-methyl 5-fluorobenzimidazole (0.31 g, 2.04 mmol) was added, and potassium carbonate was used as a base (0.30 g, 2.20 mmol), and acetonitrile was stirred at 50 C as a solvent. After 40 minutes, after cooling to room temperature, intermediate V (0.43 g, 1.70 mmol) was added and the mixture was warmed to 75 C. After concentration, extraction, column chromatography separation, drying, etc., the intermediate X-13 (0.48 g) is obtained in a yield of 77.8%; white solid

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 5-Fluoro-2-methyl-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Southwest University; Zhou Chenghe; Man Nabaonei·lamohan·laao·yadafu; Wang Juan; (39 pag.)CN110305064; (2019); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

22884-10-2, name is 2-(1H-Imidazol-1-yl)acetic acid, belongs to imidazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C5H6N2O2

Examples; CRYSTAL FORMS OF ZOLEDRONIC ACID (ZLD-Ac); Preparation of ZLD-AC crystal form I; General procedure for the preparation of ZLD-AC crystal form I starting from 1- Imidazoleacetic acid (IAA), Phosphorous acid (H3PO3) and Phosphorous oxychloride (POC13) (Examples 1-9, see Table 1) :; A cylindrical reactor equipped with a mechanical stirrer, a thermometer, a reflux condenser and a dropping funnel, is loaded with 1-IMIDAZOLEACETIC acid (IAA), Phosphorous acid and a diluent (Toluene/Chlorobenzene/PEG-400/Silicon oil). The obtained suspension is heated to 75C-80C and Phosphorous oxychloride is added drop- wise. The reaction mixture is then heated to 75C-100C for 1-34 hours. Then water is added at 80C-100C. The mixture is stirred vigorously for about 15 minutes. [In some cases, when Silicon oil is used as a diluent, there is a need to add Toluene in order to improve the separation between the oily phase and the aqueous phase]. Then the phases are separated. The aqueous phase is put in a clean reactor and heated to 95C-100C for 13.5-19 hours. Then it is cooled to 5C and absolute Ethanol is added to obtain a precipitate after stirring at 5C for 2.5-4 hours [In some cases a precipitate of Zoledronic acid is obtained without adding absolute Ethanol as an anti-solvent]. The white product is then filtered, washed with absolute Ethanol and dried in a vacuum oven at 50C for 17-24 hours to obtain Zoledronic acid crystal form I (LOD BY TGA=6. 3%-9. 3%).; ZLD HPLC METHOD: COLUMN: PHENOMENEX PHENYL-HEXYL 5UM, 250X4.6MM MOBILE PHASE: 40MM OCTANSULFONIC ACID SODIUM SALT IN 1% HCLO4, 0.2% H3PO4 : METHANOL (85:15) DETECTION: 220NM STABILITY WAS MEASURED VERSUS THE PRESENCE OF FORM II. P THE STABILITY DATA FOR EXAMPLE 4 IN THE TABLE ABOVE IS:

The synthetic route of 22884-10-2 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TEVA PHARMACEUTICAL INDUSTRIES LTD.; TEVA PHARMACEUTICALS USA, INC.; WO2005/5447; (2005); A2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem