Tag: M.W=100-200

33468-69-8, name is 4-(Trifluoromethyl)-1H-imidazole, belongs to imidazoles-derivatives compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Computed Properties of C4H3F3N2

To a 0 C. solution of 4-(trifluoromethyl)-1H-imidazole (1.82 g, 13.4 mmol) in DMF (20 mL) was added sodium hydride (0.81 g, 20.1 mmol). The mixture was stirred at room temperature for 1 h. The crude 2,6-dimethyl-4-nitrophenyl trifluoromethanesulfonate prepared above (4.0 g, 13.4 mmol) was added. The mixture was stirred at 80 C. for 12 h. The reaction was diluted with water and extracted with ethyl acetate (30 mL*3). The organic layer was dried over anhydrous Na2SO4 and concentrated under reduced pressure. The crude material was purified by silica gel chromatography to give 1-(2,6-dimethyl-4-nitrophenyl)-4-(trifluoromethyl)-1H-imidazole (805 mg, 21%) as a colorless solid. 1H NMR (400 MHz, CDCl3) delta 8.01 (s, 2H), 7.47 (s, 1H), 7.23 (s, 1H), 2.11 (s, 6H).

The synthetic route of 33468-69-8 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; PFIZER INC.; US2012/202834; (2012); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 54624-57-6,Some common heterocyclic compound, 54624-57-6, name is 2-Bromobenzimidazole, molecular formula is C7H5BrN2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

2- (3- (4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl) phenyl) imidazo [1,2- a] pyridine(100 mg, 0.31 mmol),Palladium acetate (4 mg, 0.016 mmol),Triphenylphosphine (16 mg, 0.06 mmol),And sodium carbonate (66 mg, 0.62 mmol)After adding 1,4-dioxane and water at a ratio of 1: 1 in 2 mL portions2-Bromobenzimidazole (61 mg, 0.31 mmol) was added thereto, and the mixture was stirred at 90 ° C for 16 hours. After the reaction is completed, the reaction mixture is cooled to room temperature and the reaction product is separated into water and ethyl acetate. The extracted organic layers were concentrated and the concentrate was purified by silica gel column chromatography (dichloromethane: ethyl acetate, 10: 1 v / v) to give 2- (3- (imidazo [ ) Phenyl) -1H-benzimidazole (43 mg, 45percent).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Bromobenzimidazole, its application will become more common.

Reference:
Patent; Korea Research Institute of Chemical Technology; Jeon Mun-guk; Kim Gwang-rok; Huh Yun-jeong; Lee Jun-mi; (27 pag.)KR2018/101671; (2018); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

These common heterocyclic compound, 26663-77-4, name is Methyl benzimidazole-5-carboxylate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Safety of Methyl benzimidazole-5-carboxylate

The benzimidazole -5 – methyl formate (2.66 g, 15 . 12 mmol) is dissolved in 35 ml ethanol, adding hydrazine hydrate (8.6 ml, 120.9 mmol), 80 C reflux reaction for 36 hours, filtering, to obtain white solid, then the beating of ethyl acetate three times (3 × 15 ml), to obtain 1.8 g of white solid, yield 67.7%

The synthetic route of Methyl benzimidazole-5-carboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chinese Academy Of Medical Sciences Pharmaceutical Institute; Wang Xiaojian; Sun Chenbin; Ge Jun; Xi Meiyang; Xiao Qiong; Yin Dali; (51 pag.)CN107151220; (2017); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 5805-57-2,Some common heterocyclic compound, 5805-57-2, name is (1H-Benzo[d]imidazol-2-yl)methanamine, molecular formula is C8H9N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: 9-Chloroacridine or its derivatives (1.0 mmol) and phenol (10.0 mmol) were added into a 100 ml round-bottom flask and the mixture was stirred for 1 h at 60 C under argon atmosphere. Then benzimidazole derivatives (8a-8n, 8p-8q, 1.2 mmol) were added. The mixture was stirred under 120 C for 2 h. Then the mixture was poured into a mixture of ethyl acetate (50 mL) and N-methyl morpholine (1 ml) to get the crude product as yellow precipitation. The crude product was recrystallized from ethylacetate.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route (1H-Benzo[d]imidazol-2-yl)methanamine, its application will become more common.

Reference:
Article; Gao, Chunmei; Li, Bin; Zhang, Bin; Sun, Qinsheng; Li, Lulu; Li, Xi; Chen, Changjun; Tan, Chunyan; Liu, Hongxia; Jiang, Yuyang; Bioorganic and Medicinal Chemistry; vol. 23; 8; (2015); p. 1800 – 1807;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Reference of 17325-26-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17325-26-7, name is Methyl 1H-imidazole-5-carboxylate belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

b) 3-(2,2-Dimethyl-3-oxo-indan-1-yl)-3H-imidazole-4-carboxylic acid methyl ester; To a solution of 3-hydroxy-2,2-dimethyl-indan-1-one (2.0 g, 11.3 mmol) in THF (50 mL) is added methyl 4-imidazolecarboxylate (CASNo. 17325-26-7, 1.72 g, 13.6 mmol), and triphenylphosphine (3.56 g, 13.6 mmol). The reaction is cooled to 0 0C and di-f-butyl azodicarboxylate (3.13 g, 13.6 mmol) is added. The reaction is placed at room temperature and permitted to stir for three hours. The reaction mixture is cooled to 0 0C and quenched with 4 N HCI in dioxane (5 mL, 20 mmol) and stirred for 30 minutes. The reaction is concentrated to near dryness and diluted with ethyl acetate. The organic layer is extracted three times with 1 N aqueous HCI. The aqueous extracts are combined, neutralized with Na2CO3, and extracted three times with ethyl acetate. The combined organic layers are dried with Na2SO4, filtered, and concentrated. The resulting residue is purified by silica gel flash chromatography (ethyl acetate-dichloromethane, 0:1 to 3:7) to furnish 3-(2,2-dimethyl- 3-oxo-indan-1-yl)-3H-imidazole-4-carboxylic acid methyl ester; HRMS: (ESI) m/z 285.1246 [(M+H)+: Calcd for C16H16N2O3: 285.1239]; 1H NMR (400 MHz, CDCI3) delta ppm 0.82 (s, 3 H), 1.46 (s, 3 H), 4.02 (s, 3 H), 6.70 (s, 1 H), 7.39 (s, 1 H), 7.47 – 7.52 (m, 1 H), 7.72 (t, J=7.45 Hz, 1 H), 7.79 – 7.86 (m, 1 H), 7.93 – 7.99 (m, 2 H).

The synthetic route of Methyl 1H-imidazole-5-carboxylate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; NOVARTIS AG; WO2008/76336; (2008); A2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 38993-84-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 38993-84-9 name is (1-Methyl-1H-imidazol-5-yl)methanol, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

A solution of triphosgene (62 mg, 0.21 mmol) in DCM (4.0 mL) was added to a stirred solution of A13 (prepared as described in: WO 2013/055987; 500 mg, 0.525 mmol) and Et3N (120 mg, 1.18 mmol) in DCM (16 mL) at 20 °C. The resulting mixture was stirred at that temperature for 2 h. A solution of (1-methyl-1H-imidazol-5-yl)methanol (80 mg, 0.709 mmol) in DCM (3 mL) was then added followed by nBu2Sn(OAc)2 (2 drops). The reaction mixture was stirred at 20 °C for 16 h under N2 then was concentrated under reduced pressure. The residue was purified by prep-TLC (DCM/MeOH=30/1) to give A17 as a yellow solid (250 mg, yield: 44percent). LCMS (condition A): RT = 0.97 min, m/z = 1091.6 [M+H]+.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, (1-Methyl-1H-imidazol-5-yl)methanol, and friends who are interested can also refer to it.

Reference:
Article; Dragovich, Peter S.; Broccatelli, Fabio; Chen, Jinhua; Fan, Peter; Le, Hoa; Mao, Weiguang; Pillow, Thomas H.; Polson, Andrew G.; Wai, John; Xu, Zijin; Yao, Hui; Zhang, Donglu; Bioorganic and Medicinal Chemistry Letters; vol. 27; 23; (2017); p. 5300 – 5304;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 716-79-0, name is 2-Phenyl-1H-benzo[d]imidazole, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 716-79-0, Recommanded Product: 2-Phenyl-1H-benzo[d]imidazole

General procedure: 2.5 g (12.88 mmol) of 2-phenyl-benzimidazole was dissolved in 30 ml of N,N-dimethylformamide, and 5.3 g (38.6 mmol) of K2CO3 and 2.0 ml (16.7 mmol) of 1-chloro-4-iodobutane were added to the resulting solution, followed by mixing the mixture at a room temperature for 10 hours. The reactant was combined with 100 ml of water and extracted with ethylacetate (70 ml X 5) being washed with water and a sodium hydroxide solution, and then the combined organic layer was dried over anhydrous sodium sulfate and filtered. The solvent was removed from the filtrate under a reduced pressure, and the resulting residue was refined by silica gel column chromatography (n-hexane/ethylacetate=2/1) to obtain 3.5 g (yield 96%) of the title compound.1H NMR (300MHz, CDCl3) delta 1.69(m, 2H), 2.00(m, 2H), 3.43(t, 2H), 4.29(t, 2H), 7.30-7.50(m, 3H), 7.55(m, 3H), 7.72(m, 2H), 7.83(m, 1H); MS(m/e, M+): 285

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Phenyl-1H-benzo[d]imidazole, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Lim, Chae Jo; Kim, Nakjeong; Lee, Eun Kyoung; Lee, Byung Ho; Oh, Kwang-Seok; Yoo, Sung-Eun; Yi, Kyu Yang; Bioorganic and Medicinal Chemistry Letters; vol. 21; 8; (2011); p. 2309 – 2312;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 32673-41-9, These common heterocyclic compound, 32673-41-9, name is 4-Imidazolemethanol hydrochloride, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Step 1 Preparation of 1-triphenylmethyl-4-(hydroxymethyl)imidazole To a solution of 4-(hydroxymethyl)imidazole hydrochloride (35.0 g, 260 mmol) in 250 mL of dry DMF at room temperature was added triethylamine (90.6 mL, 650 mmol). A white solid precipitated from the solution. Chlorotriphenylmethane (76.1 g, 273 mmol) in 500 mL of DMF was added dropwise. The reaction mixture was stirred for 20 hours, poured over ice, filtered, and washed with ice water. The resulting product was slurried with cold dioxane, filtered, and dried in vccuo to provide the titled product as a white solid which was sufficiently pure for use in the next step.

The synthetic route of 32673-41-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck & Co., Inc.; US6015817; (2000); A;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 2849-93-6, name is 1H-Benzimidazole-2-carboxylic acid, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 2849-93-6, name: 1H-Benzimidazole-2-carboxylic acid

To a cold (O0C) solution of lH-benzoimidazole-2-carboxylic acid (42.0 mg; 0.23 mmol) in dry DCM (2 mL) were added oxalyl chloride (90.0 uL; 0.92 mmol) and few drops of DMF. The mixture was allowed to warm to room temperature and the stirring was maintained for 3 hours. The solvent was evaporated under vacuum and the resulting compound was dissolved in DCM (2 mL). This solution was added dropwise to a stirred mixture of N-[4-(2-amino-l,l-dimethyl-ethyl)-phenyl]-3,4-dimethoxy- benzamide (70.0 mg; 0.21 mmol), prepared as described in 26(A) and triethylamine (79 uL; 0.51 mmol) in DCM (2 mL) at O0C. After stirring at room temperature for 16 hours, the precipitate was collected by filtration, re-dissolved in DCM and washed with sat. NaHCO3. The organic phase was dried over Na2SO4, filtered and evaporated to dryness to afford the title compound as a white solid (35.0 mg; 32% yield). 1H NMR (300 MHz, DMSO-d6) delta(ppm): 13.23 (br. s., 1 H), 10.02 (s, 1 H), 8.20 (t, 1 H), 7.72 (m, 2 H), 7.66-7.77 (m, 1 H), 7.62 (dd, 1 H), 7.48-7.59 (m, 1 H), 7.54 (d, 1 H), 7.43 (d, 2 H), 7.18-7.37 (m, 2 H), 7.08 (d, 1 H), 3.85 (s, 3 H), 3.84 (s, 3 H), 3.57 (d, 2 H), 1.34 (s, 6 H)LCMS (RT): 2.10 min (Method G); MS (ES+) gave m/z: 473.27 (MH+). MP: 223-226 0C.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; ADDEX PHARMA SA; WO2008/117175; (2008); A2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 934-32-7, name is 1H-Benzo[d]imidazol-2-amine, This compound has unique chemical properties. The synthetic route is as follows., Safety of 1H-Benzo[d]imidazol-2-amine

General procedure: A mixture of 2-aminobenzimidazole 7 (1.33 g, 10.0 mmol), 10.0 mmol of the proper alkyl halide, 1.0 g of finely powdered KOH mixed with 2.0 g of anhydrous K2CO3 and acetone (50 mL) was heated at reflux for 3 h, with stirring. The solvent was removed in vacuo and the residue was partitioned between water (100 mL) and CH2Cl2 (100 mL), and the aqueous phase was further extracted twice with CH2Cl2. The combined extracts, dried over anhydrous Na2SO4, after removal of solvent afforded an oily or solid residue which was treated with a small amount of ethyl ether to give compounds 8a-e,l-o as whitish solids which were crystallized from the proper solvent. Only in the case of compound 8f, a preliminary purification by column chromatography [SiO2/ethyl acetate-acetone (1:1)] was necessary to obtain a crystalline compound.

According to the analysis of related databases, 934-32-7, the application of this compound in the production field has become more and more popular.

Reference:
Article; Di Braccio, Mario; Grossi, Giancarlo; Signorello, Maria Grazia; Leoncini, Giuliana; Cichero, Elena; Fossa, Paola; Alfei, Silvana; Damonte, Gianluca; European Journal of Medicinal Chemistry; vol. 62; (2013); p. 564 – 578;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem