Tag: M.W=200-300

Related Products of 26576-46-5, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 26576-46-5, name is 5-Acetoacetlamino benzimdazolone belongs to imidazoles-derivatives compound, it is a common compound, a new synthetic route is introduced below.

EXAMPLE 13; mol of dimethyl aminoterephthalate hydrochloride is diazotized with sodium nitrite at 0 to 10 C. The clarified diazonium salt solution is added dropwise at room temperature over 1 hour to an acetate-buffered suspension of 0.1 mol of N-acetoacetyl-4-amino-1,2-benzimidazolone. As soon as coupling is at an end, the suspension is heated to 95 C. and filtered and the crude product is washed salt-free and dried. The crude pigment is suspended in a liter of 2-(2-ethoxyethoxy)ethanol and then stirred at 80 to 120 C. for three hours.The suspension is then cooled to 70 C. and filtered and the product is dried and ground. This gives 40 g of a neutrally yellow pigment having very high fastness to solvents and to overcoating.

The synthetic route of 5-Acetoacetlamino benzimdazolone has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Clariant International Ltd.; US2009/198045; (2009); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 39513-26-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 39513-26-3 name is 5-Bromo-1,3-dihydrobenzoimidazol-2-one, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

To a stirred solution of 5-bromo-lH-benzo[d]imidazol-2(3H)-one104 (930 mg) in a mixture of dioxane (47 ml) and 1 M aqueous sodium carbonate (24 ml) was added 5- quinolylboronic acid105 (906 mg). The reaction mixture was purged three times with Argon before adding 2-dicyclohexylphosphino-2′,6′-dimethoxybiphenyl (0.358 g) and palladium(II) acetate (0.098 g). The reaction mixture was refluxed for 4 hours. Dioxane was removed by evaporation and ethyl acetate was added. The solid obtained was filtered, dissolved in dichloromethane and washed with water. The organic layer was dried over MgS04, filtered and concentrated in vacuo. The crude material was purified by flash chromatography (silica gel, eluent: 0 to 5% of methanol in dichloromethane) to afford 5-(2-isopropyl-lH-imidazol-l-yl)-2- nitroaniline (85mg, 27%) as an orange solid. MS (ISP): 247.2 ([M+H]+). The organic layer off and the filter cake was washed with methanol. The filtrate was concentrated in vacuo to 5- quinolin-5-yl-l,3-dihydro-benzoimidazol-2-one as a dark brown solid (949 mg). MS (ISP): 262.2 ([M+H]+).

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 5-Bromo-1,3-dihydrobenzoimidazol-2-one, and friends who are interested can also refer to it.

Reference:
Patent; F. HOFFMANN-LA ROCHE AG; HOFFMANN-LA ROCHE INC.; GOERGLER, Annick; NORCROSS, Roger; DEY, Fabian; KUSZNIR, Eric Andre; (206 pag.)WO2019/43217; (2019); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

These common heterocyclic compound, 14741-71-0, name is Ethyl 2-(1H-benzo[d]imidazol-2-yl)acetate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. COA of Formula: C11H12N2O2

Method A 4-Amino-3-benzimidazol-2-yl-6-(4-methylpiperazinyl)hydroquinolin-2-one Ethyl 2-benzimidazol-2-ylacetate (1.1 eq) and 2-amino-5-(4-methylpiperazinyl)benzenecarbonitrile (1.0 eq) were dissolved in 1,2-dichloroethane, and then SnCl4 (11 eq) was added. The mixture was heated at reflux overnight. Upon cooling, the mixture was concentrated in vacuo. NaOH (3 M) was added to the solid, and the mixture heated at 80 C. for 0.5 hours. The solid was filtered and washed sequentially with H2O, CH2Cl2, and acetone. LC/MS indicated that the product was present in the acetone layer and the solid. These fractions were combined and purified by silica gel chromatography (5-10% MeOH in CH2Cl2 with 1% Et3N) to give the desired product. LC/MS m/z 375.4 (MH+), Rt 1.65 minutes.

The synthetic route of Ethyl 2-(1H-benzo[d]imidazol-2-yl)acetate has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Chiron Coporation; US2003/28018; (2003); A1;; ; Patent; Renhowe, Paul A.; Pecchi, Sabina; Machajewski, Timothy D.; Shafer, Cynthia M.; Taylor, Clarke; McCrea JR., William R.; McBride, Christopher; Jazan, Elisa; US2002/107392; (2002); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Synthetic Route of 144689-93-0, A common heterocyclic compound, 144689-93-0, name is Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate, molecular formula is C12H20N2O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 1; Preparation of olmesartan medoxomilTo dimethyl acetamide (300 ml) was added 4-(1-hydroxy-1-methylethyl)-2-propyl imidazol- 5-carboxylic acid ethyl ester (50 gms) and powdered sodium hydroxide (26 gms). To this, 4-[2-(trityltetrazol-5-yl)phenyl]benzyl bromide (135 gms) was charged at 45-500C. The contents were stirred for 5 hours at 45-500C. Diisopropylethyl amine (100 ml) was charged to the reaction mass at 40-450C. A solution of 5-methyl-2-oxo-1 , 3-dioxane-4-yl)methyl chloride (80 gms) diluted with dimethyl acetamide (160 ml) was slowly added to the reaction mass at 40-450C over a period of 1 hour. The contents were heated to 60-650C and maintained for 4 hours. The reaction mass was then cooled to 30-350C and neutralized with concentrated hydrochloride acid. The reaction mass was filtered to remove inorganic impurities, charcoalized using charcoal (10 gms) andstirred for 30 minutes at 40-450C. The reaction mass was filtered over hyflo. The clear filtrate was acidified with hydrochloric acid (100 ml) slowly at 25-30C. The contents were stirred at 60C for 1 hour. The reaction mass was chilled to 0-5C and filtered to remove tritanol. The reaction mass was concentrated under reduced pressure. The residue was quenched with water (500ml), neutralized with base and extracted in dichloromethane (500 ml). The clear dichloromethane extract was then concentrated under reduced pressure and stripped off with acetone. The residue thus obtained was isolated from acetone (250 ml) to give 55 gms of the title compound. Chromatographic purity- > 99%

The synthetic route of 144689-93-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; CIPLA LIMITED; CURTIS, Philip, Anthony; WO2008/43996; (2008); A2;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 144689-93-0, name is Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate, A new synthetic method of this compound is introduced below., HPLC of Formula: C12H20N2O3

Example 5; Preparation of ethyl-4-(1-hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityl tetrazol-5-yl)phenyl]phenyl}methylimidazole-5-carboxylate4-(1-Hydroxy-1-methylethyl)-2-propyl-1H-imidazole-5-carboxylic acid ethyl ester (100 g), N-(triphenylmethyl)-5-(4′-bromomethyl biphenyl-2-yl)tetrazole (250 g), potassium carbonate (170 g) & tetra butyl ammonium bromide (15 g) in acetone (2.5 L) were refluxed for 10-16 hours. Progress of reaction was monitor by HPLC. After completion of reaction, reaction mass was cooled and filtered to remove the salts. Inorganic salts were washed with acetone (300 mL). Acetone from combine the filtrate and washings was distilled. The residue obtained was crystallized in acetonitrile to get ethyl-4-(1-hydroxy-1-methylethyl)-2-propyl-1-{4-[2-(trityltetrazol-5-yl)phenyl]phenyl}methylimidazole-5-carboxylate (280 g).HPLC Purity=98.5%

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Ramanjaneyulu, Gorantla Seeta; Mohan, Bandari; Ray, Purna Chandra; Sethi, Madhuresh Kumar; Rawat, Vijendra Singh; Krishna, Yerramalla Raja; Lakshminarayana, Vemula; Srinivas, Mamidi; US2009/281327; (2009); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Related Products of 2963-77-1,Some common heterocyclic compound, 2963-77-1, name is 4-(1H-Benzo[d]imidazol-2-yl)aniline, molecular formula is C13H11N3, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Using a typical scale of 1.0 mmol, 1 (1.0 mmol) was dissolved inanhydrous pyridine (2 mL) in a small round-bottomed flask and themixture was cooled to 40 C after which the acid chloride(2.0 mmol; purchased or prepared as above) in dry THF or DMF(2 mL) was added dropwise over 20 min with vigorous stirring.After 2-6 h the reaction mixturewaswarmed to room temperatureand the solvent reduced under pressure. Without using a work-upthe crude product was purified by column chromatography directlyusing MeOH/DCM mixtures (1:99 to 2:8).

The synthetic route of 2963-77-1 has been constantly updated, and we look forward to future research findings.

Reference:
Article; L’abbate, Fabrizio P.; Mueller, Ronel; Openshaw, Roxanne; Combrinck, Jill M.; de Villiers, Katherine A.; Hunter, Roger; Egan, Timothy J.; European Journal of Medicinal Chemistry; vol. 159; (2018); p. 243 – 254;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Adding a certain compound to certain chemical reactions, such as: 3543-73-5, name is Ethyl 4-(5-amino-1-methyl-1H-benzo[d]imidazol-2-yl)butanoate, belongs to imidazoles-derivatives compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 3543-73-5, Computed Properties of C14H19N3O2

Example-5 Preparation of Ethyl 4-{5-[bis(2-hydroxyethyI)amino]-l-methyl-lH-benzimidazol- 2-yl} butanoate (III) Ethyl 4-[5-amino-l -methyl- l H-benzimidazol-2-yl)butanoate (II, 200.0g, 0.763mol) was added to DM Water (1.1L). Aqueous sodium acetate.3H20 (20.0g sodium acetate.3H20 in lOOmL DM water) and acetic acid (400mL) was added and agitated till complete dissolution of compound of the formula II. The reaction mixture was cooled to 0-5C and ethylene oxide (270. Og, 6.12mole) was added maintaining the temperature of the reaction mixture at 0-5C. The reaction mixture was stirred at 0-5C for 5 hours. The temperature of reaction mixture was raised to 20-25C and agitated at 20-25C for 18 hours. After completion of the reaction, dichloromethane (2.0L) was added at 20-25C followed by addition of aqueous solution of potassium carbonate (440. Og potassium carbonate in 1.1L DM water) portion wise at 20-25C to control the evaluation of effervescence and agitated at 20-25C for 5-10 minutes. The layers were separated. The organic layer (dichloromethane) was washed with DM water (1.0L) twice and organic layer was concentrated under vacuum at 40-50C till viscous mass is obtained. The viscous mass was dissolved in acetone (1.0L), cooled to 0-5C and agitated at 0-5C for 1 hour. The solid separated out was filtered, washed with chilled (0-5C) acetone (200.0mL) and dried at 40-50C under vacuum for 6 hours to give the title compound (III, 210.0g; 78.53%), with a purity of 99.06%.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Ethyl 4-(5-amino-1-methyl-1H-benzo[d]imidazol-2-yl)butanoate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; FRESENIUS KABI ONCOLOGY LTD.; MISHRA, Bhuwan Bhaskar; KACHHADIA, Nikunj Shambhubhai; TOMAR, Vinod Singh; LAHIRI, Saswata; WO2013/46223; (2013); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Electric Literature of 3543-73-5, A common heterocyclic compound, 3543-73-5, name is Ethyl 4-(5-amino-1-methyl-1H-benzo[d]imidazol-2-yl)butanoate, molecular formula is C14H19N3O2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example-5 Preparation of Ethyl 4-{5-[bis(2-hydroxyethyl)amino]-1-methyl-1H-benzimidazol-2-yl}butanoate (III) Ethyl 4-[5-amino-1-methyl-1H-benzimidazol-2-yl)butanoate (II, 200.0 g, 0.763 mol) was added to DM Water (1.1 L). Aqueous sodium acetate.3H2O (20.0 g sodium acetate.3H2O in 100 mL DM water) and acetic acid (400 mL) was added and agitated till complete dissolution of compound of the formula II. The reaction mixture was cooled to 0-5 C. and ethylene oxide (270.0 g, 6.12 mole) was added maintaining the temperature of the reaction mixture at 0-5 C. The reaction mixture was stirred at 0-5 C. for 5 hours. The temperature of reaction mixture was raised to 20-25 C. and agitated at 20-25 C. for 18 hours. After completion of the reaction, dichloromethane (2.0 L) was added at 20-25 C. followed by addition of aqueous solution of potassium carbonate (440.0 g potassium carbonate in 1.1 L DM water) portion wise at 20-25 C. to control the evaluation of effervescence and agitated at 20-25 C. for 5-10 minutes. The layers were separated. The organic layer (dichloromethane) was washed with DM water (1.0 L) twice and organic layer was concentrated under vacuum at 40-50 C. till viscous mass is obtained. The viscous mass was dissolved in acetone (1.0 L), cooled to 0-5 C. and agitated at 0-5 C. for 1 hour. The solid separated out was filtered, washed with chilled (0-5 C.) acetone (200.0 mL) and dried at 40-50 C. under vacuum for 6 hours to give the title compound (III, 210.0 g; 78.53%), with a purity of 99.06%.

The synthetic route of 3543-73-5 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; FRESENIUS KABI ONCOLOGY LIMITED; MISHRA, Bhuwan Bhaskar; KACHHADIA, Nikunj Shambhubhai; TOMAR, Vinod Singh; LAHIRI, Saswata; US2014/121383; (2014); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 5993-91-9, name is (1H-Benzo[d]imidazol-2-yl)methanamine dihydrochloride, A new synthetic method of this compound is introduced below., Application In Synthesis of (1H-Benzo[d]imidazol-2-yl)methanamine dihydrochloride

[0118] To a stirred solution of (2-aminomethyl)benzimidazole dihydrochloride hydrate (5.96 g, 27.1 mmol) in dry MeOH (225 mL) was added 6,7-dihydro-5H-quinolin-8-one (3.99 g, 27.1 mmol) and the mixture stirred at room temperature for 69 h. To the resultant solution was added sodium borohydride (2.06 g, 54.2 mmol) in two portions and the mixture stirred for 1.5 h. The reaction mixture was concentrated in vacuo and diluted with CH2Cl2 (150 mL). The organic layer was washed with saturated aqueous sodium bicarbonate (200 mL), the aqueous layer extracted with CH2Cl2 (2×50 mL) and the combined organic layers dried (Na2SO4), filtered, and concentrated in vacuo. Purification by column chromatography on silica gel (CH2Cl2/MeOH, 99:1 followed by 98:2 and 96:4) gave the intermediate amine (3.59 g, 50%) as a yellow foam. 1H NMR (CDCl3) delta 1.66-1.90 (m, 3H), 1.91-2.00 (m, 1H), 2.00-2.17 (m, 1H), 2.33-2.69 (br m, 1H), 3.88-3.96 (m, 1H), 4.37 (d, 1H, J=3.0 Hz), 7.18-7.26 (m, 4H), 7.48 (d, 1H, J=6.0 Hz), 7.58-7.78 (br m, 1H), 8.55-8.58 (m, 1H); 13C NMR (CDCl3) delta 19.66, 29.12, 30.24, 46.62, 57.28, 122.21, 122.83, 133.55, 138.07, 146.98, 156.17, 157.73.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Bridger, Gary; Skerlj, Renato; Kaller, Ai; Harwig, Curtis; Bogucki, David; Wilson, Trevor R.; Crawford, Jason; McEachern, Ernest J.; Atsma, Bem; Nan, Siqiao; Zhou, Yuanxi; Schols, Dominique; Smith, Christopher Dennis; Di Fluri, Maria Rosaria; US2003/220341; (2003); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem

Application of 870837-18-6, These common heterocyclic compound, 870837-18-6, name is 3-Methoxy-4-(4-methyl-1H-imidazol-1-yl)benzaldehyde, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

To a THF solution of C6 (R21 = R21 = Me and R4 = Me1 R6 = H and R7 = p- F-Ph) will be added LDA (1.1 eq) at -78 0C and the solution will be stirred for 30 min before C7 (R8 = H; R10 = 3-MeO-phenyl; R9 = 4-(4-Methylimidazol-1-yl)) will be added. After the starting material is consumed, the reaction mixture will be treated with triflic anhydride and triethyl amine before the volatiles will be removed and residue chromatographed to give a product which upon TFA deprotection and purification will give compound C8 (R21 = R21 = Me and R4 = Me, R6 = H and R7 = p-F-Ph, R8 = H; R10 = 3-MeO-phenyl; R9 = 4-(4-Methylimidazol-1-yl)).

The synthetic route of 870837-18-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SCHERING CORPORATION; WO2009/5729; (2009); A1;,
Imidazole – Wikipedia,
Imidazole | C3H4N2 – PubChem